MC-65 Binocular Reflected Light Tool Makers/Measuring Microscope (Z-Axis)

NEW
Meiji Techno's MC Series Precision Measuring Systems are composed of high quality metallurgical microscope components, precision X stages and durable heavy duty stands. Meiji Techno measuring microscopes are available with 1-axis electronic digital readouts in inches and metric. These systems can be configured for use with 35mm photomicrography, analog CCD video, digital CCD video, digital CMOS video and consumer-grade digital still camera systems. Operators can perform visual inspection and measurement of small items or components without complicated system setup. Mitutoyo Digimatic Micrometer heads have serial output for SPC applications. MC Series Systems are available in 110 or 220 volt configurations.

NOTE: The Mitutoyo Digimatic Indicators - MTI543-392 (Z axis) (shown in the photo) are included in the system

Made In Japan


Locate a DealerGet a Quote


Model
Head
Illumination
Eyepieces
Objectives
Stand

MC-65

Binocular
Infinity corrected vertical Koehler illuminator, focal length 200mm, with sliding rotatable polarizer. Filter Set: Blue Clear, Green Clear, Neutral Density ND8 and Polarizing filters in metal mounts. Port to accept FL150/12 flexible 36" (914.4mm) single arm fiber optic light guide. Flexible 36" (914.4mm) single arm fiber light guide for MA806. Focusing lens for FL150/12. Light source: 115V, 50-60Hz halogen lamp, 21V 150W. Light source: 230V, 50-60Hz halogen lamp, 21V 150W
Focusing eyepiece HWF10X-FF with cross-line reticule and set screw. High eyepoint eyepiece HWF10X, FN: 18, Eyepoint: 24mm
Plan Epi M5X, N.A. 0.10, infinity corrected, W.D. 20mm
Plan Epi M10X, N.A. 0.25, infinity corrected, W.D. 7.48mm
Plan Epi M20X, N.A. 0.40, infinity corrected, W.D. 5.20mm
Plan Epi M50X, N.A. 0.75, infinity corrected, W.D. 0.38mm
11" x 13" stand with 38mm post

MC-75

Trinocular

Details

MC-65 SERIES & MC-75 SERIES BRIGHTFIELD/DARKFIELD AND SIMPLE POLARIZATION OBSERVATION METALLURGICAL MEASURING/TOOL MAKERS COMPOUND MICROSCOPES INFINITY CORRECTED OPTICAL SYSTEM F=200MM Z AXIS MEASURING MICROSCOPES QUINTUPLE NOSEPIECE

Brightfield:The simplest of all the metallurgical optical microscopy illumination techniques. Sample illumination is transmitted or incident (i.e., illuminated from below or above and observed from above) white light and contrast in the sample is caused by absorbance of some of the transmitted or incident light in dense areas of the sample. Brightfield microscopy is the simplest of a range of techniques used for illumination of samples in light microscopes and its simplicity makes it a popular technique. The typical appearance of a brightfield microscopy image is dependent on the type of illumination technique used.

Darkfield: In optical microscopy, darkfield describes microscopy methods, in both light and electron microscopy, which exclude the unscattered beam from the image. As a result, the field around the specimen is generally dark. Darkfield microscopy is a very simple yet effective technique and well suited for contrast with metallurgical type samples and to analyze and visually test new and existing materials to identify their properties and characteristics for the development or improvement of new or existing products.

Simple Polarizing Light: Transverse wave light whose vibration possess direction is called polarized light. Light from an ordinary light source (natural light) that vibrates in random directions is called nonpolarized light. In contrast, while light with vertical vibration that travels within a single plane is called linearly polarized light, circularly polarized light and elliptically polarized light are types of light in which the vibration plane rotates forward. A polarizing plate (polarizing filter) or polarizing prism is often used as the device to change natural light to linearly polarized light.

The MC-65 & MC-75 Series is our precision “Z” axis measuring systems are composed of high quality microscope components, precision X-Y stages and durable heavy duty stands. The MC-65 & MC-75 Series measuring microscopes measure only in the Z axis with electronic digital readouts in inches and metric 12.7mm (0.5”) range. Operators can perform visual inspection and measurement of small items or components without complicated system setup. Mitutoyo Digimatic Micrometer heads have serial output for SPC applications. Fiber optic cable and 21V, 150W light source included.

Features:
•Computer Aided Design
•Ergonomically positioned coarse and fine focus controls
•Comfortable binocular viewing head with depolarizer
•150W Vertical Koehler Illuminator
•Brightfield and simple polariziation observation mode
•Focusing 10X eyepiece with cross-line reticle 
•Planachromat Epi objectives, M5X, M10X, M20X, M50X included
• “Z” axis mounting bracket to accept Mitutoyo MTI543-392 Digimatic Indicator and MA721 - 1.5” extension rod for 12.7mm (0.5”) range for “Z” axis measurement 
•Blue Clear, Green Clear, Neutral Density, ND8 and Polarizing filters included 
•Optional LED vertical koehler LED illuminator and transformer available

Details

Our Model MC-65 is a reflective light measuring microscope with erect image and binocular head with depolarizer and Z-axis measurment.

Components & Accessories

Included:
   • MC-65: Binocular reflected light fiber optic light guide with Koehler illuminator with sliding rotatable polarizer (Z-Axis)
   • MA815: Binocular head - Siedentopf type, I.P. adjustment 53mm to 75mm, graduated diopter on left eyetube (30.0 mm I.D. eyetube). Inclined at 30° degrees
   • MA859CF: SWH 10X Widefield high eyepoint focusing eyepiece, with cross-line reticle and guide pin, Field No. 22, tube O.D. 30.0 mm (each)
   • MA817: SWH 10X Widefield high eyepoint eyepiece, Field No. 22, tube O.D. 30.0 mm (each) (MA817 accepts optional 25mm diameter reticle)
   • MA923: Plan Semi Apo Epi Objective BD 5X, N.A. 0.10, W.D. 17.0 mm, F.N. 22 
   • MA924: Plan Semi Apo Epi Objective BD 10X, N.A. 0.25, W.D. 7.48 mm, F.N. 22 
   • MA925: Plan Semi Apo Epi Objective BD 20X, N.A. 0.40, W.D. 5.20 mm, F.N. 22 
   • MA926: Plan Semi Apo Epi Objective BD 50X, N.A. 0.75, W.D. 0.38 mm, F.N. 22 
   • MA993: Vertical Koehler illuminator, with sliding rotatable polarizer, infinity tube lens, focal length 200mm, with clear blue, clear green, ND25 neutral density, and polarizing filter in metal mounts port to accept FL190/12 flexible 36” single bundle light guide
   • FT190/12: Flexible 36” single arm light guide for MA933 illuminator 
   • FT190/115: FT190/115 Light Source: 110/120V, 50-60Hz, Halogen lamp, 21V 150W 
   • FU-3050: Coaxial coarse and fine focus block with BF/DF quintuple nosepiece (Includes integral 38mm mounting bracket)
   • MA807/10: Mounting brackets for digital “Z” axis indicator (Included with FU-3050) 
   • MTI543-392: Mitutoyo Digimatic Indicator (lug back) for “Z” axis movement: Range 12.7mm (0.5”) (1 Required) (MA721 is required)
   • MA721: 1.5” (38 mm) Extension rod for “Z” axis digital indicator (Required for MTI543-392) 
   • MAC-10: Heavy duty stand with 38mm post, 11” x 13” inch surface board 900.00

OPTIONAL COMPONENTS & ACCESSORIES BELOW

Digimatic Indicators:
   • MTI905689: Data Transfer Cable for MTI543-392 to MTI542-007A or MTIEH-542-072A
   • MTI542-007A: EC Counter Assembly Type Display Unit
   • MTIEH542-072A: EH Counter Multi-Function Display Unit

Viewing Heads:
   • MA816: Trinocular head - Siedentopf type, I.P. adjustment 53mm to 75mm, graduated diopter on left eyetube (30.0 mm I.D. eyetube). Inclined at 30 degrees (Included in Model MC-70 & MC-70T)
   • MA979: Trinocular head - Siedentopf type, erect image with sliding 0/100 beamsplitter, inclined at 30 degrees, I.P. adjustment 53mm to 75mm, graduated
diopter on left eye tube

Plan Semi Apo BD EPI Objectives:
   • MA989: Plan Semi Apo Epi Objective BD 100X, N.A. 0.90. W.D. 0.37 mm, F.N. 22
   • MA686/05: Adapter to mount RMS thread objective to BF/DF nosepiece

Illuminator:
   • FT190/LED: LED Light source: 120V to 240 VAC, 50/60Hz operation, LED lamp, with variable light-intensity regulation, with AC Fan

Stage Micrometers:
   • MA285: Stage micrometer, 1mm divided into 100 units, each unit 0.01mm
   • MA286: Stage micrometer, 0.04” divided into 100 units, each unit 0.001inch
   • MA292: Metal stage micrometer, 0.01mm, for reflected light

Bulbs:
   • FL150/70: Spare bulb, 21V/150W (For FL150/100 or FL150/200)


Double click to read at full screen
Download Brochure (PDF)



Double click to read at full screen
Download Manual (PDF)



Double click to read at full screen
Download Brochure (PDF)



Double click to read at full screen
Download Brochure (PDF)