| | |
| Rigid-Arm type stand with integral focus block with a 94.5mm Black and White stage plate and two stage clips | |
| (Discontinued) Rigid Arm Stand with integral focus, incident and transmitted tungsten light, 94.5mm B&W stage plate & two stage clips | |
| (E.O.L./DISCONTINUED) Rigid Arm stand with incident and transmitted halogen light & 94.5mm clear glass stage plate & two stage clips (110V) | |
| (E.O.L./DISCONTINUED) Rigid arm stand with incident and transmitted halogen light & 94.5 clear glass stage plate & two stage clips (220V) | |
| Base only with transmitted illuminator no rigid arm for ABE stand | |
| (E.O.L./DISCONTINUED) Rigid Arm stand with focus block & transmitted & incident halogen illumination, 94.5 mm clear glass plate & two stage clips (110V) | |
| ABH Rigid arm Stand w/o top light assembly with built in incident halogen light, 94.5mm glass stage plate & two stage clips (110V) | |
| ABH Rigid arm Stand w/o top light assembly with built in incident halogen light, 94.5mm glass stage plate & two stage clips (220V) | |
| In base switch for fluorescent box illuminator on ABH/1 | |
| Transformer only for fluorescent illuminator on ABH/1 | |
| | |
| | |
| Rigid Arm Stand with focus block, transmitted illuminator,6V 20W halogen lamp & overhead fluourescent box | |
| Rigid Arm Stand with focus block, transmitted and incident halogen light, 94.5 mm glass plate and two stage clips(220V) | |
| | |
| Rigid Arm Stand with focus block mounted on a plain base, 94.5 Black & White stage plate and two stage clips | |
| AZ Limb/Rigid arm focus block only for AZ stand | |
| (DISCONTINUED)Rigid arm type stand with focus block, dual reflection lens system, Incident mirror assembly with spotlight, rotatable mirror in base | |
| Bottom transmitted rotatable replacement square mirror for B stand | |
| Top Incident mirror replacement only for B stand | |
| (Discontinued) USE BX/PT#3 Top mirror with clamp screw (end of life) | |
| HBO 100W Mercury lamp bulb | |
| | |
| | |
| (1.5") 38MM post diameter for BAS heavy duty stand 25" length stainless steel vertical column and lock washer and 1/2-13x1 bolt | |
| Dual Arm Ball Bearing Heavy Duty Boom stand with 13"x 13"x1.5" base, 75lbs, 25"vertical post, 32mm drop down post (for RZ Series) | |
| Dual Arm Ball Bearing Heavy Duty Boom stand without 13"x13" base, and without 25"height 32mm vertical post | |
| Dual Arm Ball Bearing Heavy Duty Boom stand without 13"x 13"x1.5" base, 75lbs, with 25" vertical post, 32mm drop down post (for RZ Series) | |
| Dual Arm Ball Bearing Heavy Duty Boom stand without 13"x 13"x1.5" base, 75lbs, with 25" vertical post, 20mm drop down post (for EM) | |
| Dual Arm Ball Bearing Heavy Duty Boom stand with 13"x 13"x1.5" base, 75lbs, with 25" vertical post, without 20mm drop down post (for EM) | |
| Dual Arm Ball Bearing Heavy Duty Boom stand without 13"x 13"x1.5" base, 75lbs, with 25" vertical post, with 20mm drop down post (for EM) | |
| 20mm Straight Drop Down Post for BAS-2 stand - 4" in length | |
| Dual Arm Ball Bearing Heavy Duty Boom stand with 13"x 13"x1.5" base, 75lbs, with 25" vertical post, (Accepts FS or FSC 5/8" focus block) | |
| 32mm Straight Drop Down Post, 9" in length for BAS-1 (For RZ Series) | |
| Replacement 32mm tilting post for BAS-1 (same as MAC-TP) | |
| Tilting post 195mm length with 32mm diameter | |
| Replacement 38mm (1.5") diameter, straight drop post with 5/8" mounting pin for FU3050 | |
| (E.O.L./DISCONTINUED) Pole stand with focusing slide block, rotatable mirror in base for "pseudo darkfield illumination,"clear glass, requires MA264/LED | |
| Replacement Rotatable bottom mirror and bracket for BD mirror stand (old part BX/PT#1) | |
| Replacement 145mm pillar for BD stand (old part BX/PT#2) | |
| Replacement Pipe for BD stand (Old part BX/PT#21) | |
| (Discontinued) Use "BD/PT#1" Bottom mirror with clamp screw (Old Part BX/PT#3, MTT part#B/PT#2) | |
| BD stand without F Focusing holder | |
| (E.O.L./DISCONTINUED) Use "BD-M-LED" BF/DF LED illuminated stand w/ rotatable and sliding mirror, 110V/240V, requires F block (white) | |
| (E.O.L./DISCONTINUED) Use "RZBD/LED" BF/DF LED illuminated stand w/ rotatable and sliding mirror, 110V/240V, requires F block (white) | |
| Pole stand with focusing slide block, incident LED, rotatable mirror in base for "pseudo"LED transmitted darkfield illumination with dual variable intensity control, clear glass stage plate 115/240V | |
| BD-LED rotatable knob (exterior) | |
| BD-LED stainless steel shaft (interior) | |
| BD-LED knurled female nut with allen screw | |
| (T.S.L./DISCONTINUED) Power Supply Auto Voltage Sensing 100-240 VAC 50/60 Hz 0.4A Output: 5vDC 2.5A, UL listed | |
| Pole stand with F focus block w/out PKL/LED-ILL rotatable mirror in base for "pseudo" LED transmitted darkfield illumination clear glass stage plate 115/240V | |
| LED bulb only for BD-LED without housing | |
| Wide Surface Pole stand with rotatable and sliding mirror in base for "pseudo," LED transmitted light darkfield illumination, clear glass stage plate, two stage clips, locking position ring, needs F holder (white) | |
| | |
| | |
| Complete LED bulb module for BD-M-LED and RZBD/LED stand with wires | |
| Tablet Camera 10.1" Tablet with Windows 7 & 5MP built in camera, 0.5X C" mount included | |
| (E.O.L./DISCONTINUED) BM Base with pillar only, 110v transformer | |
| (E.O.L./DISCONTINUED) BM Base with pillar only, 220v transformer | |
| Prism 17.5mm for BM Halogen and LED models | |
| Prism 19mm for BM Halogen and LED models | |
| (E.O.L./DISCONTINUED)100V Transformer for BM Models (MTT PART# BM/PT#1) | |
| (Discontinued) BM model 220V Transformer only | |
| Joint to hold horizontal arm on vertical pillar for BM & BMK Halogen and LED models | |
| Straight eyetube assembly for BM and BMK halogen and LED models | |
| (E.O.L./DISCONTINUED) Two position On/Off switch for BM/BMK Halogen Series. Substitute part is SKT/PT#122 | |
| Clamp screw for Long Arm Dental BM & BMK Halogen and LED models | |
| Fuse holder for BM & BMK Halogen Models | |
| Rack only for BM and BMK Halogen and LED models | |
| Pinion only for BM Halogen or LED models | |
| 110V Lamp housing with cord for BM & BMK Halogen Series | |
| Threaded Black rubber grommet for cord for BM and BMK Halogen models(MTT=BMK/PT#MTW7605NB) | |
| Female socket for the BM & BMK Halogen base ( Specify Flat or Round Pin) | |
| Mounting plate (left hand) for BM Halogen and LED Series | |
| Mounting plate (right hand) for BM Long Arm Dental Stereo Halogen or LED models | |
| Pillar only for BM Long arm Dental stereo series | |
| Jack bracket (jack knife bracket) for BM Long arm Dental Stereo microscope that holds lamp housing on Halogen and LED models | |
| (DISCONTINUED-2017) Complete BM LED Pen light with AC plug and built in On/Off switch for BM/LED models | |
| On/Off Switch cord only for BM & BMK LED Pen light (Part 1 of 3) | |
| AC Adapter only for BM & BMK LED Pen light models (Part 2 of 3) | |
| LED Penlight only for BM-1 and BM-2/LED series without AC(BM/PT-LED/SP-2) or On/off Switch (BM/PT-LED/SP-1( Part 3 of 3) | |
| (Discontinued) REPLACED BY BM-1LED, Long arm Dental stereo microscope vertical, with 1X, 2X objective, wtih WF10X eyepiece pair | |
| (E.O.L./DISCONTINUED) Use BM-1LED Long arm Dental stereo vertical,1X, 2X objectives wtih WF10X eyepieces (220V) | |
| BM-1/LED Long arm Dental stereo microscope vertical wtih 1X, 2X objective and LED pen light and on/off, without MA102(pair) | |
| BM-1/LED Long Arm Dental Stereo Microscope Vertical without MA107 (2X) with MA106(1X) and LED penlight and On/Off Switch cord and transformer. | |
| (E.O.L./DISCONTINUED) BM-1 Long arm Dental stereo microscope vertical with MA113 0.5X obj., WF10X eypiece without MA107 2X obj. | |
| Long arm Dental Stereo LED Microscope vertical 1X, 2X objective, WF10X eypiece pair, LED pen light with on/off switch | |
| (E.O.L./DISCONTINUED) Long arm Dental stereo vertical,1X,2X,3.5X objective ,WF10X eyepiece (pair) | |
| (E.OL./DISCONITNUED) Long arm Dental stereo microscope (220V) vertical, 1X, 2X, 3.5X objective, WF10x (pair) | |
| Long Arm Dental LED stereo Vertical microscope wtih 1x,2x,3.5x objective, WF10X(pair) LED pen light with on/off switch | |
| Ball stud for BMK side mounted LED and Halogen Pen light | |
| (Discontinued) Auxiliary Halogen Pen light package with stud ball for articulating side arm mount | |
| Diopter Eyetube for BMK LED and Halogen models | |
| Straight Eyetube for BMK LED and Halogen models | |
| Mounting plate (right hand) for BMK LED and Halogen models | |
| Eyetube Mounting plate (left hand) for BMK LED and Tungsten (OLD) models | |
| Square prism for BMK LED and Halogen models | |
| Complete BMK LED penlight with BM/PT-LED/SP-2(AC ADAPTER) & BM/PT-LED/SP-1(ON/OFF SWITCH CORD, BMK/PT-LED/SP-3 (LED PENLIGHT) & BMK/PT#3 (BALL ARTICULATIG ARM) | |
| | |
| LED Penlight for BMK/LED series with BMK/PT#3(Ball Stud with articulating arm) witout AC or On/Off Switch | |
| (DISCONTINUED-2017) Replacement Penlight Lamp and Housing for the BM and BMK LED | |
| (E.O.L./DISCONTINUED-2017) Replacement Condensing lens part only with Male threads for the BM and BMK LED units | |
| (E.OL./DISCONITNUED) Long arm Dental stereo microscope inclined,1X,2X objective,WF10X(pair) Halogen model | |
| (E.OL./DISCONITNUED) Long Arm Dental stereo inclined,1X,2X objective, WF10X (pair) Halogen model (220V) | |
| Long arm stereo dental microscope with head,WF10X (pair) without MA161(1X), MA162(2X), BM/BASE/100 | |
| Long Arm Dental Stereo microscope inclined, 1X,2X objective, with WF10X (pair), LED penlight with On/Off switch, Ac Adapter | |
| Long arm Dental LED stereo microscope, wtih 1x/2x objective , without MA102-10x eyepieces (pair) | |
| (Discontinued) Long arm Dental stereo microscope with WF10X (pr), with MA162 2x obj. without MA161 1X objective Halogen | |
| (Discontinued) long Arm Dental stereo inclined, 1X, 2X, 3.5X objective,10X eyepiece (pr), Halogen model | |
| Long Arm Dental stereo inclined microscope wtih 1X, 2X, 3.5X objective, WF10X (pr), Halogen model (220V) | |
| Long Arm Dental Stereo microscope inclined,1X,2X,3.5X objective, WF10X (pr) ,LED penlight, On/Off switch, AC adapter | |
| (Discontinued) Long arm Dental stereo inclined 1X,2X,3.5X objective w/o MA102 WF10X eypiece (pr), Halogen Model | |
| BMK-3 and BMK-4 LED penlight complete with plugs to base | |
| (E.O.L./DISCONTINUED) Use "BD/PT#1" Top mirror with clamp screw (=BD/PT#3, MTT Part# B/PT#2) | |
| (E.O.L./DISCONTINUED)"USE BD-LED" LED Stand | |
| | |
| Basic blue filter set from CHROMA | |
| Basic green filter set from CHROMA | |
| | |
| (E.O.L./DISCONTINUED) 2.8 MP MONOCHROME DIGITAL VIDEO CAMERA,53FPS,USB 3.0, BLACK CAM | |
| | |
| U excitation filter set from CHROMA | |
| Blue FITC filter set with bandpass emission filter from CHROMA | |
| Green rhodamine filter set with bandpass emission filter/CHROMA | |
| | |
| 1.4 MP 2/3" Cooled CCD Digital USB 2.0 Camera,1392x1040, 15 fps with image pro | |
| FITC/EGFP/Bodipy FI/Fluo3/DiO (sizing = Olympus BX2) | |
| TRITC/Rhodamine/Alexa 546 (sizing = Olympus BX2) | |
| Texas Red/Al;exa 568/Alexa 594 (sizing = Olympus BX2) | |
| Cy5/Alexa 647/NIR dyes (sizing = Olympus BX2) | |
| | |
| Endow GFP BP (EGFP) HQ470/40x HQ525/50m Q495LP | |
| ET-DAPI Filter set/ CHROMA | |
| Chroma filter set ET-EGFP (FITC/Ooy) | |
| Chroma filter set-ET-mCherry, Texas Red | |
| | |
| | |
| | |
| | |
| | |
| | |
| Catalog MC Series Measuring Microscope Systems | |
| | |
| (E.O.L./DISCONTINUED-2015) 10.7mp color digital video camera, 43mm diagonal, USB 2.0 (E.O.L. 7/9/2015) | |
| (E.O.L./DISCONTINUED-2015)10.7mp monochrome digital video camera, 43mm diagonal, USB 2.0( E.O.L. 7/9/2015) | |
| DO NOT USE, USE CC1400C OR CC1400M 3" Cooled CCD,1392 X 1040 | |
| 1.4mp color digital video camera, 2/3" Cooled CCD, USB 2.0 | |
| 1.4mp monochrome digital video camera,2/3" Cooled CCD, USB 2.0 | |
| 1.4mp color digital video camera, 2/3" CCD, 1392 X 1040 | |
| 1.4mp color digital video camera, 2/3" CCD, USB 2.0 | |
| 1.4mp monochrome digital video camera, 2/3" CCD, USB | |
| (E.O.L./DISCONTINUED)1.4MP COOLED 2/3"CCD COLOR DIG.VIDEO CAM,15FPS,USB 2.0, BLACK HOUSING WITH IMAGE-PRO PREMIER 9 MONTH TRIAL | |
| (E.O.L./DISCONTINUED)1.4MP COOLED 2/3"CCD MONOCHROME DIG.VID CAM,15FPS,USB 2.0, BLACK HOUSING WITH IMAGE-PRO PREMIER 9 MONTH TRIAL | |
| (E.O.L./DISCONTINUED)2.8 MP 2/3"CCD Color Digital video camera, 53 FPS, USB 3.0 black housing with image pro premium (AP2) | |
| (E.O.L./DISCONTINUED)2.8 MP 2/3"CCD Monochrome Digital video camera, 53 FPS, USB 3.0 black housing with image pro premium (AP2) | |
| (USE 2100RC) 1.4mp color digital video camera, 1/2" CCD, USB 2.0 | |
| 1.4mp monochrome digital video camera, 1/2"CCD, 1392 X 1040 pixels | |
| 1.4mp color digital video camera, 1/2" CCD, USB 2.0 | |
| 2.0mp color digital video camera, 1/1.8 CCD, USB 2.0 | |
| 2.0mp monochrome digital video camera,1/1.8"CCD, USB 2.0 | |
| DO NOT USE, USE CC2300C CCD, 2080 X 1563 pixels | |
| 3.3mp color digital video camera, 1/1.8" CCD, USB 2.0 | |
| 1.4 MP 2/3" Cooled CCD Digital USB 2.0 Camera,1392x1040, 15fps, with image pro | |
| 1.4 MP Cooled 2/3" CCD, 1392 x 1040, 15fps, USB 2.0, with image pro | |
| 1.4 MP, 2/3" CCD, Digital Camera,30 fps, 1392x1040 , BLACK HOUSING WITH IMAGE-PRO PREMIER 9 MONTH TRIAL | |
| 1.4MP, 2/3" CCD Camera, 30fps, 1392x1040, BLACK HOUSING WITH IMAGE-PRO PREMIER 9 MONTH TRIAL | |
| 32mp color digital video, pixel shifting 1/2" CCD | |
| 2.0, 8.0, 16.0,32.0mp color digital video camera, 1/1.8" CCD, USB 2.0 | |
| 32mp monochrome digital video camera, pixel shifting 1/2" CCD | |
| 2.8 MP 2/3" CCD Digital Camera, 1936x1456 53 fps, with IMAGE PRO Premier 9 month trial, black housing | |
| 2.8 MP, 2/3" CCD, 1936x1456 Digital Camera,53 fps, with IMAGE PRO Premier 9 month trial, black housing | |
| 2.8 m.p.,Sony 1cx674CCD, 53fps, USB 3.0,2/3" Optical Format | |
| 5.0mp color digital video camera, 2/3" CCD, USB 2.0 | |
| 5.0mp monochrome digital video camera, 2/3" CCD, USB 2.0 | |
| | |
| Coaxial vertical illuminator w/o transformer, 6V 30W halogen | |
| Coaxial vertical LED illuminator with separate transformer | |
| Lamp socket and cord for COX | |
| C Clamp for CR-2 (PAIRED) for CR-2 (Option) | |
| Articulated Spring Arm Stand w/ headrest and angle ball wtih focus block with 84.5 mounting hole.(with screws) | |
| 1:10 zoom stereo body, common main objective design, detent click stops | |
| Ergonomic 5-35 ° Binocular 1:10 Zoom Stereo Head system with Planachromatic 1.0X Objective and complete with Incident & Transmitted LED illumination with a Working Distance of 78mm and a 8X to 80X total Magnification with a 10x/22 eyepiece and a... | |
| Ergonomic 5-35 ° Trinocular 1:10 Zoom Stereo Head system with Planachromatic 1.0X Objective and complete with Incident & Transmitted LED illumination with a Working Distance of 78mm and a 8X to 80X total Magnification with a 10x/22 eyepiece and ... | |
| 20 ° Inclined Binocular 1:10 Zoom Stereo Zoom system with Planachromatic 1.0X Objective and complete with Incident & Transmitted LED illumination with a Working Distance of 78mm and a 8X to 80X total Magnification with a 10x/22 eyepiece and a ce... | |
| 20 ° Inclined Trinocular with a 23.2mm trinocular tube, 1:10 Zoom Stereo Zoom system with Planachromatic 1.0X Objective and complete with Incident & Transmitted LED illumination with a Working Distance of 78mm and a 8X to 80X total Magnificatio... | |
| Ergonomic head with 5°-35° inclination for CZ series | |
| Binocular head with 20° inclination only for CZ series | |
| EWF 10X/22 eyepiece (each) for CZ series | |
| Adjustable 10x eyepiece for CZ series | |
| EWF 15x/16mm eyepiece for CZ models | |
| Plan Achromat 0.3x objective | |
| Plan achromat 0.5x objective, W.D. 126mm | |
| 0.5X. Infinite. Plan Apochromatic Objective. Working Distance: 126mm. | |
| Planachromat 1.0X objective, W.D. 78mm for CZ series | |
| Plan Achromat 2.0x objective | |
| CZ Planachromat 2.0x objective, W.D. 32.5mm | |
| Incident and transmitted LED stand with built-in 76mm coarse and fine focus block knob 200µ fine adjustment, auto-voltage sensing power supply 100-200V for CZ series | |
| Replacement incident top light LED for CZ LED stand | |
| Polarizing Filter 360 degree rotatable, fits the CZ- series objectives | |
| Polarizing Plate 360 degree rotable, fits the CZ Base stand | |
| Focus block with 76mm I.D, with 5/8" bonder pin made by Olympus | |
| Trinocular Photo attachment that will fit the CZ-1100 and the CZ-1105 | |
| Photo tube part of CZ-9005 (black piece) | |
| Beam splitter lever for CZ-9005 with black knob threaded | |
| The parts to mount phototube part with CZ-9005 photo port attachment | |
| (E.O.L./DISCONTINUEDDust cap for eyetube I.D. 24mm | |
| (E.O.L./DISCONTINUEDDust cap for eyetube I.D. 34mm | |
| (E.O.L./DISCONTINUED)Camera adapter for Panasonic DMC-LX3 | |
| (E.O.L./DISCONTINUED)Lens adapter for Nikon Coolpix P6000 | |
| (E.O.L./DISCONTINUED)Lens adapter for Kodak Z650, Z710, Z740, ZD710 - 52mm | |
| (E.O.L./DISCONTINUED)Adapter ring for Kodak P850,P712 | |
| (E.O.L./DISCONTINUED)Adapter ring for Kodak P880 | |
| (E.O.L./DISCONTINUED)Adapter ring for Canon PowerShot A510, A520, A540 | |
| (E.O.L./DISCONTINUED)Adapter ring for Canon A570, A90 | |
| (E.O.L./DISCONTINUED)Adapter ring for Canon PowerShot A610, A620, A630, A640 | |
| (E.O.L./DISCONTINUED)Lens adapter for Canon PowerShot A650 IS-52mm | |
| (E.O.L./DISCONTINUED)Adapter ring for Canon PowerShot, A700, A710IS, 720IS | |
| (E.O.L./DISCONTINUED)Adapter ring for Fuji Fine PIX E550 & E900 | |
| (E.O.L./DISCONTINUED)Adapter ring for Canon G10 - 58mm | |
| (E.O.L./DISCONTINUED)Adapter ring for Canon PowerShot G7,G9(use MD-M5B,58mm ring w/MA868) | |
| (E.O.L./DISCONTINUED)Adapter ring for Canon G15-58mm | |
| (E.O.L./DISCONTINUED)Adapter ring for Kodak DX6490, DX7590, Z7590 | |
| (E.O.L./DISCONTINUED)Adapter ring for Kodak DX7440, Z730 | |
| (E.O.L./DISCONTINUED)Adapter ring for Canon PowerShot A60, A70, A75, A85 (=DCA-AUB52A60) | |
| (E.O.L./DISCONTINUED)Lens adapter for Canon A80/95, 52mm | |
| (E.O.L./DISCONTINUED)Adapter rings for Canon PowerShot S1-IS | |
| (E.O.L./DISCONTINUED)Adapter ring for HP Photo Smart 850, 945 (black) | |
| (E.O.L./DISCONTINUED)Lens adapter set for Nikon Coolpix 8800 - 58mm | |
| (E.O.L./DISCONTINUED)Adapter ring for Panasonic, DMC-FZ18, DMC-FZ28 | |
| (E.O.L./DISCONTINUED)Adapter ring for Panasonic DMC-FZ10 FZ15, FZ20 (=DCA-J41 or DCA-T103) | |
| (E.O.L./DISCONTINUED)Adapter rings for Panasonic DMC-FZ7, FZ5, FZ8, FZ18 | |
| (E.O.L./DISCONTINUED)Nikon P7000, 71000 adapter 58mm | |
| (E.O.L./DISCONTINUED)Adapter rings for Nikon Coolpix P80 | |
| (E.O.L./DISCONTINUED)Adapter ring for Nikon P80 | |
| (E.O.L./DISCONTINUED)Lens adapter for Nikon Coolpix 5400 - 52mm (NEW PART# DCA-AU5400N) | |
| (E.O.L./DISCONTINUED)Lens adapter for Nikon 5400 - 52mm | |
| (E.O.L./DISCONTINUED)Adapter ring for Nikon Coolpix 8400 | |
| (E.O.L./DISCONTINUED)Adapter ring for Canon Powers G3, G5 | |
| (E.O.L./DISCONTINUED)Adapter for Canon PowerShot A30, A40 | |
| (E.O.L./DISCONTINUED)Lens adapter for Canon PowerShot S2 IS S3 IS - 58mm | |
| (E.O.L./DISCONTINUED)Adapter ring for Canon PowerShot G6 (same as part# DCA-J55) | |
| (E.O.L./DISCONTINUED)Adapter ring for Kodak Z612, Z712, Z812 | |
| (E.O.L./DISCONTINUED)Adapter ring for Olympus Cemedia C-3000,3030,3040,4040,3100,4100etc | |
| (E.O.L./DISCONTINUED)Adapter ring for Nikon Coolpix 5400 | |
| (E.O.L./DISCONTINUED)Adapter ring for Sony S70, S75, S85, CD300, CD400, CD500 | |
| (E.O.L./DISCONTINUED)Adapter ring for Fuji Fine Pix S602,4900Z,6900Z,S3000,5000,5200etc | |
| (E.O.L./DISCONTINUED)Adapter ring for Olympus Comedian C-700,720,730,740,750,755,760,etc. | |
| (E.O.L./DISCONTINUED)Adapter ring for Nikon Coolpix 5000 | |
| (E.O.L./DISCONTINUED)Adapter ring for Nikon Coolpix 5700, 8700 (MTT# DCA-137) | |
| (E.O.L./DISCONTINUED)Lens adapter for Cannon PowerShot G3, G5 | |
| (E.O.L./DISCONTINUED)Lens adapter for Canon G10 digital camera | |
| (E.O.L./DISCONTINUED)Adapter ring for Epson Photo PC, 3000Z,3100Z | |
| (E.O.L./DISCONTINUED)Adapter tube for Canon A10 or A20 | |
| (E.O.L./DISCONTINUED)Adapter ring for Casio QV5700, AV4000, QV3500EX | |
| (E.O.L./DISCONTINUED)Adapter ring for Minolta Konica, Z3, Z5, Z6 | |
| (E.O.L./DISCONTINUED)46mm adapter tube for Canon A30 or A40 | |
| (E.O.L./DISCONTINUED)Adapter tube for Olympus 5060 & 7070 (48.5-52mm) | |
| (E.O.L./DISCONTINUED)Adapter ring for Fuji Fine Pix, S-5000 | |
| (E.O.L./DISCONTINUED)Adapter ring for Panasonic DMC-FZ10 FZ15,FZ20(=DCA-AFZ20P or DCA-J41) | |
| (E.O.L./DISCONTINUED)Adapter ring for Olympus Cmedia, C-8080 | |
| (E.O.L./DISCONTINUED)Adapter ring for Minolta Konica, Z1,Z2 (=DCA-AV4552M) dapter tube for nikon Coolpix 5000 (46-52mm) | |
| (E.O.L./DISCONTINUED)Adapter tube for nikon coolpix 5000 (46-52mm) | |
| (E.O.L./DISCONTINUED)Adapter ring for Canon PowerShot A80, A95 | |
| (E.O.L./DISCONTINUED)Lens adapter for Canon PowerShot A80, A95 - 52mm | |
| (E.O.L./DISCONTINUED)Adapter tube for Canon G6 (same as part# DCA-AUB652) | |
| (E.O.L./DISCONTINUED)Adapter tube, Olympus C-2000,2020,2040,3000,3020,3030,3040,4040,5050 | |
| (E.O.L./DISCONTINUED)Universal adapter for compact DC | |
| (E.O.L./DISCONTINUED)Adapter ring for Olympus C-5000, SP-310,350, Sony DSCW1,DSCW5,DSCW7 | |
| (E.O.L./DISCONTINUED)Adapter ring for Canon PowerShot S2-IS, S3-IS, S-5IS | |
| (E.O.L./DISCONTINUED)Adapter ring for Sony Cyber Shot DSC-V1 | |
| (E.O.L./DISCONTINUED)Adapter ring for Canon PowerShot G1, G2 | |
| (E.O.L./DISCONTINUED)Adapter ring for Sony Cyber Shot DSC-V3 | |
| (E.O.L./DISCONTINUED)Lens Adapter - 52mm | |
| (E.O.L./DISCONTINUED)Adapter ring for Sony DSC-H1, DSC-H5 | |
| (E.O.L./DISCONTINUED)CKC Power lens adapter for Canon PowerShot - 37mm | |
| (E.O.L./DISCONTINUED)Power lens adapter for Canon PowerShot SD500, SD550 - 28mm | |
| (E.O.L./DISCONTINUED)Adapter tube for Panasonic DMC-FZ10 FZ15,FZ20,52mm(=DCA-AFZ20P,DCA-J41 | |
| (E.O.L./DISCONTINUED)Zeikos universal adapter for attaching filters & lens | |
| (E.O.L./DISCONTINUED)-USE DCA-B13)DC adapter ring for Nikon Coolpix 5400 | |
| (E.O.L./DISCONTINUED)(USE DCA-B2)DC adapter ring for Sony S70,S75,S85,CD300,400,500 | |
| (E.O.L./DISCONTINUED)(USE DCA-B4)DC adapter ring for Fuji Fine Pix S602,4900Z,S3000 etc | |
| (E.O.L./DISCONTINUED)(USE DCA-B5)DC adapter ring for Olympus Camedia C-700,720,730, | |
| (E.O.L./DISCONTINUED)(USE DCA-B6)DC adapter ring for Nikon Coolpix 5000 | |
| (E.O.L./DISCONTINUED)(USE DCA-B7)DC adapter ring for Nikon Coolpix 5700,8700 Dust cap for eyetube I.D. 24mm | |
| 2.0mp color digital video camera, 1/2" CMOS, USB 2.0 | |
| 1.3mp monochrome digital video camera, 1/2" CMOS,USB 2.0 | |
| (T.S.L../DISCONTINUED) Wifi camera | |
| 3.1mp color digital video camera, 1/2" CMOS, USB 2.0 | |
| 5.0mp color digital video camera, 1/2.5" CMOS, USB 2.0 | |
| | |
| (Use DK-LITE_B)CMOS camera 1.5mp USB 2.0 | |
| 1.5mp digital video camera, 1/2.5" CMOS, USB 2.0 | |
| E.O.L./(DISCONTINUED)Color 6.6MP 3000x2208, prog. scan,5 fps,2/3" format, US | |
| (DISCONTINUED)High resolution CMOS, 21.O MP | |
| High resolution COMS, 21.0MP (monochrome) (Discontinued) | |
| Microscope Eyepiece port light | |
| | |
| Stereo Microscope Binocular, 1X/3X Turret, 10x eyepiece, LED stand rechargeable | |
| Switching adpater for EM-20 Series 4.5V 1A | |
| Switching adapter for EM-20 Series in 220V | |
| Frosted Glass Stage Pates 60mm for EM-22 and EM-23 | |
| Stage plate black/white acrylic. 60mm diameter for EM-20 models | |
| Stereo Microscope Binouclar, 2X/4X Turret, 10x eyepiece, LED stand rechargeable | |
| Bino.Stereo Micro.,1X/2X/3X Turret Rigid Arm Stand w/ Top & Bottom LED | |
| Stereo Binocular w/ 1X/2X/4X Turret,I&T LED stand Rechargeable | |
| Stereo Microscope Binocular 1X/3X Turret,10X Eyepiece, Top&Bottom LED | |
| Auxillary lens 0.5x, W.D. 165mm for the EM-33 Trinocular Stereo.. | |
| Protective lens for the EM-30 | |
| HWF 10X eyepiece (paired) | |
| | |
| | |
| Super widefield 20X eyepiece for EM-30, fits a 30.mm eyetube | |
| | |
| | |
| Stereo Binocular 2X/4X Turret, 10X Eyepiece,w/ Top & Bottom LED stand | |
| Binocular Stereo Zoom Microscope 0.7X-4.5X Rig.arm w/Top& Bottom LED | |
| | |
| Trinocular Stereo Zoom Scope 0.7X-4.5X arm stand w/Trans&Inc.LED | |
| | |
| Trinocular tubes for EM-33 | |
| Auxillary lens 0.5x W.D. 177MM for the EM-40 | |
| Trinocular stereo zoom body with 0.67-4.5x zoom magnification with 10x eyepiece (pair); zoom ratio 1:6.7, eyetube angle fits 76mm focus holder | |
| Binocular Zoom stereo microscope, WF10X Eyepiece (paired), Pole-type stand with focus block | |
| Stand focus block with 31.8MM pole opening | |
| Subsidiary ring with screw for EM-50 models | |
| Binocular Zoom stereo microscope, WF10X Eyepiece (paired), Pole-type stand with focus block, LED ring illuminator( MA962) | |
| Trinocular Zoom stereo microscope,WF10X Eyepiece (paired), C mount adapter 0.35X, Pole-type stand with focus block | |
| Trinocular Zoom stereo microscope,WF10X Eyepiece (paired), C mount adapter 0.35X, Pole-type stand with focus block, LED ring illuminator (MA962) | |
| Straight eyetube for EMF Stereo Body | |
| | |
| 1X objective lens in mount | |
| Straight eyetube for EMF Stereo Body | |
| Diopter tube for EMF Stereo Body | |
| Fixed 1X Power Stereo Binocular Body only | |
| Objective cover for EMF-1 | |
| Fixed 2X Stereo Microscope Binocular body only | |
| Objective lower cover for EMF-2 | |
| Straight eyetube assembly for EMT (each) | |
| Prism housing complete (left hand) | |
| Eyetube diopter assembly for EMT models (each) | |
| Prism housing complete (right hand)for EMT models | |
| | |
| Brass plate for EMT models | |
| | |
| | |
| Fiber sheet for EMT model | |
| Prism support for EMT models | |
| | |
| Knurled ring for EMT models | |
| Lens mount with screw for EMT model | |
| Clamp ring for EMT models | |
| 2X w/ling, barrel & screw 102,109,108 & 113 | |
| Lens mount 2X obj. 102, 106-109, 112, 113 | |
| 3X lens in mount for EMT model | |
| 1X objective for EMT model | |
| Objective barrel 1X for EMT models | |
| Objective barrel 2X/3X for EMT models | |
| 2X objective for EMT models | |
| 3X objective for EMT models | |
| | |
| 4X lens in mount for EMT models | |
| | |
| Objective cap for EMT model | |
| | |
| Prism cover cap - right for EMT models | |
| Prism cover plate (right hand) for EMT models | |
| Screw for prism housing on EMT models | |
| Right hand prism for EMT models | |
| Stopper screw for EMT models | |
| Prism cover cap - left for EMT models | |
| Prism cover plate (left hand) | |
| | |
| Dust cap for eyetube for EMT models | |
| | |
| Detent stainless steel ball for EMT | |
| | |
| Set screw for EMT OBJECTIVE COVER | |
| Turret 1X/2X Stereo Binocular Body | |
| Binocular Stereo Body 1x and 2x in turret magnification charger/Black finish | |
| Objective cover for EMT-1(1X & 2X Markings) Stereo Body with knurled silver ring | |
| Black lower objective with 1X and 2X marking, without knurled silver piece | |
| Turret 1X/3X Stereo Binocular Body | |
| Turret 1X/3X Stereo Binocular Body (Black) | |
| Objective cover for EMT-2 Body | |
| (E.O.L./DISCONTINUED2015) Turret 2X/4X Stereo Binocular Body.. | |
| Objective cover for EMT-3 Stereo Body | |
| (E.O.L./..DISCONTINUED 2015) TURRET 1X/4X STEREO BINOCULAR BODY | |
| (DISCONTINUED) Turret 1X/2X Trinocular Stereo Body | |
| (E.O.L./DISCONTINUED) Turret 1X/3X Trinocular Stereo Body | |
| (E.O.L./DISCONTINUED- 2015)-2X/4X trinocular stereo body EMT-3 | |
| (E.O.L./DISCONTINUED-2015) -1X/4X trinocular stereo body EMT-4 | |
| Straight eyetube assembly for EMX models | |
| Eyetube diopter assembly for EMX models | |
| | |
| | |
| (E.O.L./DISCONTINUED-2015) Long working distance Stereo Body 0.5X/1X. | |
| Zoom stop s/screws and washers | |
| Detent Knob (Right Side only needed) ( NON MTT) | |
| Detent parts set R&L (From MTT) | |
| 2.16" x .58" front label with Meiji logo and text | |
| | |
| Prism cover plate for EMZ | |
| | |
| | |
| | |
| Diopter Tube assembly for EMZ | |
| | |
| Upper dipoter with tube with screws | |
| | |
| | |
| | |
| | |
| | |
| Left side prism house for EMZ | |
| Dust cap for eyepiece for EMZ models | |
| | |
| Screw for prism and frame joint | |
| | |
| | |
| | |
| Lower Objective cover for EMZ-2, EMZ-2TR, EMZ-5, EMZ-5TR, EMZ-10, EMZ-8, EMZ-13( top hat ) Threads on top and Threads on the bottom is M50, Pitch 0.75 | |
| | |
| | |
| Lens assembly also includes EMZ/PT#32 and EMZ/PTS 43-67 | |
| Dust cap for phototube of EMZ stereo microscopes and C-mount adapters | |
| | |
| Objective cover (upper) for EMZ | |
| | |
| M3X5 socket set cup for attaching zoom knob screw | |
| M2X2 slotted set screw for zoom 0.7X-4.5X ring | |
| | |
| | |
| | |
| | |
| Gear Shaft for EMZ Series | |
| | |
| | |
| | |
| | |
| Main drive gear, set screw, washers, lock nut. | |
| | |
| | |
| | |
| | |
| | |
| | |
| Screw A, brass cheesehead screw | |
| Screw B, brass cheesehead screw | |
| | |
| (New part# EMZ-5/PT#58-62) Lens mount,retaining ring lens & spacer | |
| USE "EMZ-5/PT#61" Objective lens | |
| | |
| | |
| | |
| Prism case for EMZ-5 (old type) (pair) | |
| Left hand prism case (old style) | |
| Right hand prism case (old style) | |
| Black washer for EMZ detent models | |
| (DISCONTINUED) 1X-3X Binocular Zoom stereo body, W.D.93mm | |
| 0.7X-4.5X Binocular Zoom Stereo body, W.D.110mm | |
| Final lens assembly for EMZ-10 model | |
| Binocular zoom stereo body with .7x to 4.5x magnification, 30 degree eyetube | |
| 0.7X-4.5X Binocular Zoom Stereo body, W.D.110mm High Eyepoint type | |
| (DISCONTINUED-2015) 0.4X-2.5X Bino.Zoom Stereo Body, W. D.185mm(Req'd FL150 | |
| L&R Zoom Knob Set for EMZ-12TR | |
| | |
| Screws (2 pcs) for cover plate of EMZ-12 | |
| Nylon Stopper with screw for EMZ-12 | |
| Objective cover for EMZ-12 model | |
| (DISCONTINUED-2015) 0.4X-2.5X Bino.Zoom Stereo Body w/ detent (Req'd FL150/1 | |
| (DISCONTINUED-2015) 0.4X-2.5X Trio Stereo body,NW. D.186mm (Read FL150/12. E.E.C. DISCONTINUED | |
| (E.O.L./DISCONTINUED-2015)0.4X-2.5X Trino.Zoom Stereo Body w/ detent (Req'd FL150/ | |
| Light guide retainer for EMZ-12 OR U models | |
| 1X-7X Bino.Zoom Stereo Body, W.D. 90mm | |
| 1X-7X Binocular Zoom Stereo Body w/detent | |
| 1X-7X Trinocular Zoom Stereo Body, W.D. 90mm | |
| 1X-7X Trinocular Zoom Stereo Body w/detent | |
| 1X-7X Trinocular Zoom Stereo Body, W.D. 90mm High Eyepoint type | |
| 1X-7X Trinocular Zoom Stereo Body, W.D. 90mm High Eyepoint type (Black) | |
| 1X-7X Trinocular Zoom Stereo Body, W.D. 90mm High Eyepoint type with detent | |
| 1X-7X Bino Zoom Stereo Body, W.D.90mm(needs MA978& FL150/30) | |
| Detent parts for new EMZ-13 | |
| L & R Zoom knob set for EMZ-13/EMZ-13TR only | |
| Trinocular Zoom stereo body with .7x to 4.5x magnification, 30 deg | |
| (DISCONTINUED-2015) 7X-4.5X Bino.Zoom Stereo Body, W.D. 93mm. | |
| Prism case holder for EMZ-2 | |
| Diopter tube & Prism case for EMZ-2 | |
| Binocular Zoom Microsurgical Training System,W.D. 7.87" (200 mm) with EMZ-10B, MA520, MA546, PKL1/310 | |
| Trinocular Zoom Microsurgical Training System, W.D. 7.87" (200 mm) with EMZ-18TRB, MA520, MA793, PKL1/310 | |
| Binocular Zoom Microsurgical Training System, W.D. 9.84" (250mm) with EMZ-10B, MA520, MA558, PKL-1/310 | |
| Binocular Zoom Microsurgical System w/ EMZ-10B, MA520, MA558, but without PKL-1/310 | |
| Binocular Zoom Microsurgical System MA520, MA558, PKL-1/310 but without EMZ-10B | |
| Trinocular Zoom Microsurgical Training System, W.D. 9.84" (250mm) with EMZ18TRB, MA520, MA792, PKL-1/310, MA151/8TR | |
| (E.O.L./DISCONTINUED-2015) 0.7-4.5X Trinocular Zoom Stereo Body, W.D.93mm. | |
| Lower part of photo tube for EMZ trino. model(Black part- slips in) | |
| Trinocular tube assembly for EMZ-2TR (Black and Chrome part) | |
| 0.7X-4.5X Binocular Zoom Stereo Body, W.D. 93mm | |
| Zoom Stereo body 0.7X-4.5X for holder in 76mm diameter | |
| 0.7X-4.5X Binocular Zoom Stereo Body, W.D. 93mm-black painted | |
| EMZ lower zoom lens with shaft and gear assembly (lower brass section | |
| 0.7X-4.5X Binocular Zoom Stereo Body with DOD modification | |
| Zoom restriction knobs with ring | |
| Retaining ring for EMZ model | |
| | |
| Far bottom objective lens | |
| Metal ring lens, retaining ring for EMZ | |
| Prism case for EMZ Series | |
| Full range Zoom Knobs Kit Right and left side 0.7x-4.5x (old part # EMZ-5/PT#1) | |
| | |
| Zoom knob stopper base with brass set screw (articulates with right side zoom knob) | |
| Bottom lens assembly for EMZ models (old part # EMZ/PT#58-62) | |
| Far bottom Objective Lens (MTT# EMZ/PT#61 & EMZ-5/PT#61) | |
| Metal ring lens, retaining ring for EMZ | |
| Prism seating plate for EMZ | |
| Prism/prism plate for EMZ | |
| Full range Zoom Knobs (old part # EMZ-5/PT#1) | |
| | |
| 0.7X-4.5X Binocular Zoom Stereo Body w/ Detent, W.D.93mm | |
| Binocular Zoom Stereo Body, high eyepoint | |
| Binocular Zoom Stereo Body, high eyepoint with detent | |
| Binocular Zoom Stereo Body, high eyepoint (Black) | |
| 0.7X-4.5X Trinocular Zoom Stereo Body, W.D. 93mm | |
| EMZ-5TR/76 Zoom Stereo body 0.7X-4.5X for holder in 76mm diameter | |
| | |
| 0.7X-4.5X Zoom Stereo Trinocular Body with DOD modification. | |
| Beam Splitter Lever for prism slider (MTT# EMZ-TR/PT#418) | |
| | |
| | |
| Zoom knob set with Right and Left knob non detent (has thicker body block) | |
| Zoom knob stopper w/ washer & screw | |
| Zoom knob stopper w/washer & screw | |
| 0.7X-4.5X Trinocular Zoom Stereo w/ detent, W.D. 93mm | |
| 0.7X-4.5X Trinocular Zoom Stereo Body, W.D. 93mm High eyepoint type | |
| Trinocular Zoom Stereo Body, high eyepoint with detent (Requires MA522 - 10X eyepiece Paired) | |
| 0.7X-4.5X Trinocular Zoom Stereo Body, W.D.104mm High eyepoint type (Black) (Requires MA522 - 10X eyepiece Paired) | |
| (E.O.L./..DISCONTINUED) 0.62X-4.0X Binocular Zoom Stereo Body, W.D. 108mm | |
| 0.7X-4.5X Trinocular Zoom Stereo Body, W.D.104mm | |
| 0.7X-4.5X Trinocular Zoom Stereo Body, W.D.104mm, black painted | |
| Black box part with phototube | |
| EMZ-8TR/76 Zoom Stereo body 0.7X-4.5X for holder in 76mm diameter | |
| Trinocular Tube for EMZ-8TR | |
| | |
| | |
| Front objective lens for EMZ-8TR | |
| | |
| 0.7X-4.5X Trinocular Zoom Stereo Body w/ Detent, W.D.104mm | |
| 0.7X-4.5X Trinocular Zoom Stereo Body, W.D.104mm High eyepoint type | |
| 0.7X-4.5X Trinocular Zoom Stereo Body, W.D.104mm High eyepoint type with detent (Requires MA522 - 10X eyepiece Paired) | |
| 0.7X-4.5X Trinocular Zoom Stereo Body, W.D.104mm High eyepoint type (Black) (Requires MA522 - 10X eyepiece Paired) | |
| 0.7X-4.5X Trino.Zoom Stereo Body,W. D.104mm (req'd FL150/12,FL150/115) | |
| 0.7X-4.5X Trino.Zoom Stereo Body,w/ detent (req'd FL150/12,FL150/115) | |
| Front surface mirror in black box of EMZ-8TR. | |
| Frame for front surface mirror | |
| 0.7X-4.5X Bino.Zoom Stereo Body,W. D.104mm (req'd FL150/12,FL150/115) | |
| Stopper washer for light guide, white (pair) | |
| 0.7X-4.5X Bino.Zoom Stereo body w/ detent (req'd FL150/12,FL150/115) | |
| Binocular Zoom Stereo Body with .7x-4.5x with Near Vertical illumination and 104" W.D. | |
| Stopper washer for light guide, black (pair) | |
| (DISCONTINUED) 0.7X-4.5X Bino.Zoom Stereo Body (60 degree eyetubes), W.D. 93mm | |
| Detent parts set R&L for EMZ-5TR Trinocular model | |
| "do not use" USE EMZ-2TR/432-434 Intermediate+ upper tube+ dust cap | |
| Interactive Image and Video Masurement Software for PC, MAC, and Linuz | |
| Focusing block 84.5mm Inner Diameter fits EMZ,EMF,EMT models | |
| F holder w/Incident illuminator 6v 20w halogen lamp w/o transformer | |
| F holder with incident illuminator with 20W halogen lamp | |
| F holder with Incident illuminator with 20W halogen lamp, 220V | |
| F- Focusing block 84.5mm Inner Diameter fits EMZ, EMF,EMT models with 5W LED Incident Illuminator With Cord with flat pin | |
| | |
| | |
| Adjustment rings with set screw | |
| | |
| Handle (focus knob), spring washer, retainer nut for focus knob | |
| | |
| Retainer nut for focus knob | |
| | |
| | |
| Set screw (MTT# F/PT#7 OR P/PT#7) | |
| C" Tooth Wrench for Focusing holders | |
| | |
| | |
| (E.O.L./DISCONTINUED) Articulated arm stand for bench top attachment. Supplied with mounting flange, two piece folding arm, vertical mounting pillar and 20 mm diameter mounting pin for focus block. Maximum distance from rod to center of optical axis i... | |
| (E.O.L./DISCONTINUED) Articulated arm stand designed for mounting to a vertical surface. Supplied with mounting flange, two piece folding arm, and 20 mm diameter mounting pin for focus block. Maximum distance from rod to center of optical axis is 1080mm | |
| Triple Joint Articulating flex arm with a table clamp, accepts a 5/8" bonder pin focus block or accepts a 20mm focus block by adding BAS-20SP- 20 mm drop down post. 40" distance from middle of vert. post to optical center | |
| Triple joint articulating flex arm with a table base, accepts a 5/8” focus holder, FS or FSC, 5/8” bonder pin focus block or FS/76, accepts FS AND FSC | |
| Table clamp for boom stand with lever and hole for FA-3 Vertical post on S-4500 and S-4600 stand cast aluminum alloy. Clamp opening size 0-40mm | |
| Table clamp for boom stand with lever and hole for FA-3 Vertical post on S-4500 and S-4600 stand cast aluminum alloy. Clamp opening size 0-40mm | |
| Triple Joint Articulating Arm Assembly with 20mm Stainless Steel Drop Arm for Microscopes & Video Systems | |
| 20mm Stainless Steel Drop Arm | |
| Triple Joint Articulating Table mount stand with a built in 84.5mm holder,can be mounted with 4 screws to any lab bench Size: 19 ½ “from the base to the 1st elbow and 17 ” from 1st elbow to the ring, comes in a 16" x 9” x 5” Box , 16” to 36” Reachi... | |
| Alligator Clamp for the FA-5 with 4 screw holes | |
| Triple Joint Articulating Table mounted stand with a built in 84.8mm holder, also can be mounted with four screws to any lab bench size: 19½ from the base to the first elbow and 17" from first elbow to ring | |
| Articulating table clamp with B&L focus holder, 20” reach, clamp opening size 0-85mm. Total arm length 600mm fits B&L Stereo microscope bodies | |
| Articulating table clamp with a 76mm coarse focus block. 20” reach, clamp opening size 0-85mm. Total arm length 600mm fits our EM-32, EM-33, CZ, EM-50, EM-50L AND EM-30 AND EM-31 (needs longer set screw) | |
| Articulating table clamp with a 85mm coarse focus block. 20” reach, clamp opening size 0-85mm. Total arm length 600mm fits EMT, EMF, EMZ Series | |
| Flexible triple joint arm stand with 5/8” end adapter, 120mm-arbor height, 846mm reach, heavy duty base stand, accepts FS or FSC or FS/76 focus holder. | |
| Flexible triple joint arm stand with 5/8" end adapter, with tilting drop-down post, 120mm-arbor height, 846mm reach, heavy duty base stand, accepts F or FC focus holder | |
| Flexible triple joint arm stand, 400mm reach, with 84.5mm head holder for Meiji Techno stereo heads, accepts F or FC focus holder | |
| Holder with coarse & fine focusing block 84.5mm Inner Diameter | |
| | |
| | |
| | |
| | |
| | |
| Pinion case (MTT# EM/CF8) | |
| FC holder with drilled hole for Incident light | |
| FC knob assembly without holder and mounting bracket | |
| WAVE WASHWER FOR FC HOLDER (MTT#WW-20) | |
| Clamp screw for FC holder | |
| Pinion (EM-CF16A) with flange part (EM-CF17D) | |
| Focus block w/ Coarse & Fine focus for mounting CCD or Digital camera | |
| Holder with coarse and fine focus block 84.5mm inner diameter in white color | |
| Focus block with Coarse focus for mounting a CCD or Digital camera | |
| | |
| Focusing slide block for use in the reverse position with EMZ-8TR | |
| | |
| European power cord (CE certified) | |
| | |
| Set screw for FL150/10 Annular | |
| Self supporting dual arm light guide | |
| Dual 36" gooseneck w threaded ends, needs T-screw and focusing lenses | |
| Dual 48" gooseneck w threaded ends, needs T-screw and focusing lenses | |
| Annular light guide, 60mm (2.36") | |
| FL150 light source, 100V,50/60 Hz, EKE lamp(Japan)(0.590 ID nosepiece) | |
| Annular light guide for FL150, 66mm/60.1mm | |
| FL150 light source, 115 VAC, US cord, EKE lamp (0.590 ID nosepiece) | |
| 36" flexible single arm light guide for EMZ-12 | |
| 60" flexible single arm light guide for EMZ-12 | |
| FL150 light source, 230 VAC, 50 Hz, EURO cord, EKE Lamp (Europe) | |
| Dual arm floppy light guide, 36" long (for use with EMZ-13VX) | |
| Fiber ring light guide 31 mm diam. | |
| 24" flexible single arm light guide 0.25"(6.35mm)active fiber diameter | |
| 36" flexible single arm light guide .25"(6.35mm)active fiber diameter | |
| Focusing lens for FL150/05 and FL150/75, 28mm F.L. | |
| Focusing lens for FL150/07 and FL150/08, 28mm F.L. (2 required) | |
| Mini annular fiber optic ring light for MS-3 or MS-50 (requires MS-22) | |
| Bulb 21V, 150W (bulb for FL150) (USHIO) | |
| Self supporting single arm light guide self supporting | |
| Flexible 36" single arm fiber optic light guide for use with MS-21 | |
| Polarizer Cap (fits FL150/50) | |
| | |
| Flexible single arm light guide 36" for use w/VM series video micros. | |
| Single armlight guide, flexible 48" for use with FM Fiber microscope | |
| Door line interrupt switch | |
| (DISCONTINUED-2015) Fan 115V | |
| Fuse 3A, 5 X 20mm, slow blow (115V) | |
| Fuse 3A, 5 X 20mm, slow blow (230V) | |
| Intensity control kit 115V | |
| Rocker switch for FL150/115 FL150 light source | |
| DO NOT USE.. Use FL150/SOCHSLIDE Lampholder with new socket | |
| Lampholder with new socket for slide in lamp | |
| Lampholder with new socket for slide in lamp | |
| Switch thermal cutoff-7DC | |
| Light source: 150W, 150 VAC illum. w/filter holder/R filter, lamp | |
| FL150/115 light source w/ FL150/05 dual armlight guide,2 FL150/50 lens | |
| FL150/200 light,230V, w/ FL150/05 dual arm guides & 2 FL150/50 lenses | |
| FL150/115 light source w/ FL150/10 annular light | |
| 150/200 light source, 230 V, with FL150/10 annular light | |
| FL150/115 light source w/ FL150/75 single armlight guide,1 FL150/50len | |
| FL150/200 light source, 230V, with single arm guide & 1 FL150/50 lense | |
| FL150/12-Single arm light (36" flexible) with special end tip to fit EMZ-8U, EMZ-8UD, EMZ-8TRU, EMZ-12, EMZ-12TR, EMZ-12, EMZ-12TR, EMZ-12TRD ,MC Series with FL150/115 Light source 120V AC, 50/60Hz operation, halogen lamp, 21x 150 W with variable light intensity regulation with AC fan (USA) | |
| FL150/12-Single arm light (36" flexible) with special end tip to fit EMZ-8U, EMZ-8UD, EMZ-8TRU, EMZ-12, EMZ-12TR, EMZ-12, EMZ-12TR, EMZ-12TRD,MC Series with FL150/220 Light source 220V AC, 50/60Hz operation, halogen lamp, 21x 150 W with variable light intensity regulation with AC fan (EU) | |
| Adapter 8mm(0.316") aperture | |
| | |
| Adapter 14.35mm(0.565") aperture | |
| Adapter 16.0mm(0.629") aperture | |
| Adapter, 18.3mm (0.722") ID, fits Fostec light guides | |
| Single arm light guide self supporting | |
| Polarizer cap (fits FL180/50) | |
| | |
| | |
| | |
| | |
| | |
| (E.O.L./DISCONTINUED) Set: 1 FL180,1 FL180/05,1 L180/40, 2 FL180/50 .. | |
| Set: 1 FL180, 1 FL180/10, 1 FL180/35 | |
| POWER SUPPLY LED W/ 15mm(.590") FIBER INPUT DIAMETER-100/240V, WITH EUR..OPEAN STANDARD ELECTRICAL CORD | |
| DUAL ARM LED FIBER OPTIC ILLUMINATOR-100/240V-WITH EUROPEAN STANDARD ELECTRICAL CORD | |
| Annular LED fiber optic illuminator-66mm -100V/240V- with European standard electrical cord | |
| ANNULAR LED FIBER OPTIC ILLUMINATOR-60MM ANNULAR-100V/240V-WITH EUROPEAN STANDARD ELECTRICAL CORD | |
| SINGLE ARM LED FIBER OPTIC ILLUMINATOR SYSTEM-100/240V-WITH EUROPEAN STANDARD ELECTRICAL CORD | |
| POWER SUPPLY LED WITH15mm(.590") FIBER INPUT DIAMETER-100/240V | |
| DUAL ARM LED FIBER OPTIC ILLUMINATOR-100/240V | |
| Annular LED fiber optic illuminator-66mm -100V/240V | |
| ANNULAR LED FIBER OPTIC ILLUMINATOR-60MM ANNULAR-100V/240V | |
| SINGLE ARM LED FIBER OPTIC ILLUMINATOR SYSTEM-100/240V | |
| LED Power Supply with 15mm (.590) Fiber input diameter-110/240V-with European standard electrical cord | |
| Dual arm LED fiber optic illuminator -110/ 240V with European electric cord | |
| Annular LED fiber optic illuminator with 66mm I.D. annular light-110/240V-European standard electric cord | |
| Annular LED fiber optic illuminator - 60mm I.D. annular light, 110/115V-with European standard electrical cord | |
| Single arm LED fiber optic illuminator - 110/240V-with European standard electric cord | |
| 25mm (1.0") fiber input diameter (power supply) | |
| LED Power Supply with 15mm (.590) Fiber input diameter-110/240V | |
| Dual arm LED fiber optic illuminator - 110/115V | |
| Annular LED fiber optic illuminator with 66mm I.D. annular light-110/115V | |
| Annular LED fiber optic illuminator - 60mm I.D. annular light, 110/115V | |
| Single arm LED fiber optic illuminator - 110/240V with European standard electrical cord.. | |
| Filter holder w/o IR filter | |
| Filter holder w/IR filter-hot mirror for FL150 (IR-32-1) | |
| Filter Kit: Blue, Green, Yellow, Green, Red, Daylight, & IR | |
| Lamp handle with screws for FL180 | |
| Lamp house for 100W mercury lamp | |
| Lamp holder, cable, and socket | |
| TRIGGER WIRE REPLACEMENT FOR JAPAN FL-LHJ , MT6000 LAMPHOUSE | |
| Adapter, 15mm ID, DJ-01 "B" style | |
| Adapter, 25mm ID, "A" style | |
| | |
| Power supply for lamp house 120-220V | |
| | |
| Diffuse LED Dome light and power supply with set screws | |
| LED Ring illuminator with rheostat intensity 110V, 50/60Hz, white light, 60-150mm W.D., 60.6 x 32.2 x 107 mm, with power supply, 2 diffusing filters, fits 53mm-60mm nosepiece Wattage: 6W (JAPAN) | |
| LED Ring illuminator with rheostat intensity 240V, 50/60Hz, white light, 60-150mm W.D., 60.6 x 32.2 x 107 mm, with power supply, 2 diffusing filters, fits 53mm-60mm nosepiece Wattage: 6W (JAPAN) | |
| LED Ring illuminator with rheostat intensity 110V, 50/60Hz, white light, 100mm W.D., 93 x 62 x 32 mm, with power supply, 5000K Color Temp, fits 53mm-60mm nosepiece Wattage: 6W (JAPAN) | |
| LED Ring illuminator with rheostat intensity 240V, 50/60Hz, white light, 100mm W.D., 93 x 62 x 32 mm, with power supply, 5000K Color Temp, fits 53mm-60mm nosepiece Wattage: 6W (JAPAN) | |
| LED Ring illuminator with rheostat intensity 110V, 50/60Hz, white light, 60-150mm W.D., one diffusing filter, with power supply, fits 53mm-60mm nosepiece Wattage: 4W | |
| LED Ring illuminator with rheostat intensity 240V, 50/60Hz, white light, 60-150mm W.D., one diffusing filter, with power supply, fits 53mm-60mm nosepiece Wattage: 4W | |
| Dual arm flexible, self supporting light guide, 24” arm length, .265” main fiber bundle diameter | |
| Ring light with 60mm i.d top and 50mm I.D. bottom, SS heathing, 36” fibercables | |
| DISCONTINUED/T.S.L.) 110/120V, 50/60hz operation, halogen lamp, 21V 150W, with variable light-intensity regulation, maximum color temperature 3250° k with AC fan | |
| (E.O.L./DISCONTINUED) 220VAC, 50/60HZ operation (Europe), halogen lamp, 21v 150w, with variable light-intensity regulation, maximum color temperature 3250° k with AC fan | |
| | |
| Dual arm fiber illumination system, 115 VAC, 60hz, 3amps, with 24” arm length, .265” main fiber bundle diameter, two focusing lens assembly | |
| Dual arm fiber illumination system, 220 V, .625” nose with 24” arm length, .265” main fiber bundle diameter two focusing lens assembly | |
| Annular fiber illumination system – includes 115V, 150w quartz halogen light source with variable intensity control, .625” nose with ring light with 60mm I.D. top and 50 mm I.D. bottom, ss sheathing, 36” fibercables | |
| Annular fiber illumination system – includes 220v, 150w quartz halogen light source with variable intensity control, .625” nose with ring light with 60mm I.D. top and 50 mm I.D. bottom, SS sheathing, 36” fiber cables | |
| LED power supply with 0.635” termination, auto voltage sensing with European standard electrical cord (MA809/20) | |
| Dual arm led fiber optic system with 24” arm length self-supporting, two focusing lens assembly with variable intensity power supply with European electric standard cord (MA809/20) | |
| Dual arm led fiber optic system, 110x with 24” arm length self supporting, two focusing lens assembly with variable switch power supply. (USA) | |
| Annular led fiber optic system, 220V, 0.625” nose termination with ringlight, 60mm top I.D., 50mm I.D. bottom,35” fiber cable with variable intensity power supply with European electrical standard | |
| LED power supply 110V with 0.625" termination, auto voltage sensing 110V (USA) | |
| Annular led fiber optic system, 110x, 0.625” nose termination with ringlight, 60mm, top I.D., 50mm I.D. bottom, 36” fiber cable with variable intensity switch power supply. (USA) | |
| | |
| High Output LED microscope illuminator 24volt output/110V-240V | |
| Inclinable coarse focusing slide block with 5/8" diameter mounting pin | |
| Inclinable coarse focusing slide block with 5/8" diameter mounting pin in Black color | |
| | |
| Inclinable coarse & fine focusing slide block with 5/8" diameter mount | |
| 76mm tilting post focus block with 5/8” bonder pin adapter for CZ, EM-32, EM-33 , EM-50, EM-51 AND EM-30, EM-31 (requires a longer set screw) | |
| | |
| | |
| European power cord (CE certified) | |
| | |
| Dual arm floppy light guide, 36" long (for use with EMZ-13VX) | |
| Dualarm flexible light guide,w/8mm dia.fiber bundle,23"self supporting | |
| Rigid 20" Bifurcated / fluid bundle 40" flaccid with 15.80mm insert ( Requires FTI-02 to fit FTI light source and special adapter FT190/06-26 to fit Boom stands with 26mm horizontal arms) | |
| 20mm adapter for FT190/06 dual arm rigid/flaccid bundle with three threaded hole, specially designed for S-4000 horizontal 25mm arms | |
| 26mm adapter for FT190/06 dual arm rigid/flaccid bundle with three threaded hole, specially designed for S-4000 horizontal 25mm arms | |
| 29mm adapter for FT190/06 dual arm rigid/flaccid bundle with three threaded hole, specially designed for S-4000 horizontal 25mm arms | |
| 32mm adapter for FT190/06 dual arm rigid/flaccid bundle with three threaded hole, specially designed for S-4000 horizontal 25mm arms | |
| 1 ½ (34MM) Iinch adapter for FTI dual arm rigid / flaccid bundle with three threaded holes | |
| Boom Stand Clamp for 34mm post | |
| .625" adapter for FT190/06 | |
| (Prototype-Use FT190/06) .218" Bundle Dual 20" Sta-Put, 40" Flex | |
| Annular light guide,60mm(2.36")ID ringlight w/36"flex.sec.10mm bundle | |
| Light source, 100 VAC, pigtail cord, EKE lamp (Japan) | |
| Light source, 120 VAC, US cord, EKE lamp | |
| Light source,120 VAC, halogen lamp, 21V 150W | |
| Single arm light guide(36"flexible) w/special end tip to fit EMZ-12etc | |
| Single arm light guide(60"flexible) w/special end tip to fit EMZ-12etc | |
| .218 Bundle Single 20" Stay-Put, 40" Flex | |
| Light source, 230 VAC, 50 Hz, EURO cord, EKE lamp | |
| dual arm floppy light guide, 36" long (for use with EMZ-13VX) | |
| Focusing lens, 28mm focal length (for use with FT190/05, FT190/06, FT190/75) | |
| USE FL150/65 INSTEAD, NOT AVAILABLE MINIannular light guide, 36" flex | |
| | |
| Single arm light guide self support 24" self supporting 6.35mm diameter active output bundle, 14.80mm outer diameter of input bundle, 5.5mm diameter active input bundle (Requires one FT190/50 lens) | |
| Single arm light guide(36"flexible) | |
| | |
| Complete filter kit with case | |
| Single arm light guide (36" flexible 4.75mm,0.18" dia.fiber ooptic bun | |
| | |
| Fuse for 100-120V light source | |
| Fuse for 230V light source | |
| LED light source: 120V to 240V, 50/60Hz operation with variable | |
| Light source,120 VAC,US cord, EKE lamp,w/FT190/05 dualarm,2 FT190/50 | |
| Light source,100V version, EKE lamp w/FT190/05 dual arm w/2 FT190/50 | |
| Light source, 230 EURO version,EKE Lamp,w/FT190/05 dualarm,2 FT190/50 | |
| Special Dual Arm fiber illumination system with special adapters for S-4000 horizontal Boom Stands. Includes FT190/06 dual arm rigid self supporting 20" Bifurcated / fluid bundle 40" flaccid with 15.8mm insert and FT190/06-26, 26mm adapter for dual ar... | |
| Special Dual Arm fiber illumination system with special adapters for S-4000 horizontal Boom Stands. Includes FT190/06 dual arm rigid self supporting 20" Bifurcated / fluid bundle 40" flaccid with 15.8mm insert and FT190/06-26, 26mm adapter for dual ar... | |
| Light source, 120 VAC,US cord, EKE lamp,w/FT190/10 ringlight-60mm I.D. | |
| Light source, 100V version,EKE lamp with FT190/10 ringlight(60mm I.D.) | |
| Light source,230 EURO version, EKE lamp,w/FT190/10 ringlight-60mm I.D. | |
| Light source, 120 VAC, US cord, EKE lamp, with FT190/75 & FT190/50 | |
| Light source, 100V version,EKE lamp with FT190/75 & FT190/50 | |
| Light source,230 EURO version, EKE lamp, with FT190/75 & FT190/50 | |
| Single Arm fiber illumination system with special mounting adapters for S-4000 horizontal arm of Boom Stands. Includes FT190/13 single arm rigid self supporting 20" fluid bundle with 15.8mm insert and FT190/06-26(qty#1), 26mm adapter for single arm bu... | |
| Single Arm fiber illumination system with special mounting adapters for S-4000 horizontal arm of Boom Stands. Includes FT190/13 single arm rigid self supporting, 20" fluid bundle with 15.8mm insert and FT190/06-26, 26mm adapter for single arm bundle ... | |
| Special Adapter to fit 16 mm fiber optic bundle for FT190 lightsource to fit FT backlights, FT190/06 , Chiu, IT,Techniquip fiber optic bundles | |
| Accessory, lightsource, adapter, .393 Schott KL series | |
| Accessory, lightsource, adapter, .240 Schott KL series | |
| Accessory,lightsource, adapter, .590-Moritex & Volpi | |
| Accessory, lightsource, adapter, .590 Dolan Jenner & Meiji | |
| Accessory, lightsource, filter, dichroic, green | |
| Accessory, lightsource, filter, dichroic, red | |
| Accessory, lightsource, filter, dichroic, yellow | |
| Accessory, lightsource, filter, dichroic, blue | |
| Accessory, lightsource, filter, dichroic, daylight | |
| Accessory, lightsource, filter, dichroic, heat mirror | |
| Accessory, lightsource, adapter, .315 StockerYale | |
| Accessory, lightsource, adapter, .625 StockerYale | |
| Accessory, lightsource, adapter, .718 Schott-Fostec | |
| Accessory, lightsource, adapter, .320 Schott KL series | |
| 5x5" backlight (include lightsource adapter FTIII16867-02) | |
| 2X2" backlight (include lightsource adapter FTIII16867-02) | |
| 3X3" backlight (include lightsource adapter FTIII16867-02) | |
| | |
| Light source: 120V AC, 35W operation, LED lamp, 35W with variable light intensity regulation, with AC fan (USA), 6500k-color temperatures 72, CRI, 1350 (LM)- Lumen Output, 50K (H)-Average life, 12 vdc | |
| Light source: 230V AC, 35W operation, LED lamp, 35W with variable light intensity regulation, with AC fan (USA), 6500k-color temperatures 72, CRI, 1350 (LM)- Lumen Output, 50K (H)-Average life, 12 vdc | |
| Adapter to mount Midori with S-4000 stands | |
| Removable AC electric cord with plug for FTM/230 | |
| Removable AC electric cord with plug for UK market | |
| Removable AC electric cord with plug for FTM/115 | |
| Dual arm fiber illumination system - 120 V AC 35W (USA) Includes:FTM/115, 35W, LED light source- with variable intensity control, FT190/05 self supporting, dual arm light guide and two FT190/50 focusing lenses 25mm adapter for boom horizontal arm.... | |
| Dual arm fiber illumination system - 220/230 V AC 35W (USA) Includes:FTM/230, 35W, LED light source- with variable intensity control, FT190/05 self supporting, dual arm light guide and two FT190/50 focusing lenses 25mm adapter for boom horizontal arm | |
| Annular fiber illumination system - 120 V AC 35W (USA) Includes:FTM/115, 35W, LED light source- with variable intensity control, FT190/10 Annular light guide (60mm I.D.) 25MM adapter for boom horizontal arm | |
| Annular fiber illumination system - 220/230 V AC 35W (USA) Includes:FTM/230, 35W, LED light source- with variable intensity control, FT190/10 Annular light guide (60mm I.D.) 25MM adapter for boom horizontal arm | |
| Single arm fiber illumination system - 120 V AC 35W (USA) Includes:FTM/115, 35W, LED light source- with variable intensity control, FT190/75 self supporting single arm light guide and one FT190/50 focusing lens 25MM adapter for boom horizontal arm | |
| Single arm fiber illumination system - 220/230 V AC 35W (USA) Includes:FTM/230, 35W, LED light source- with variable intensity control, FT190/75 self supporting single arm light guide and one FT190/50 focusing lens 25MM adapter for boom horizontal arm | |
| Coaxial quadruple Focus requires mounting bracket | |
| Coaxial focus block with quintuple nosepiece for Plan Epi Brightfiled objectives, (RMS 20.32 mm THREAD x 36 TPI) includes mounting racket for 38mm post (MAC-11/PT#2) and requires mounting brackets (MA807)for Z axis digital indicator. Optional 20mm bracket available. | |
| Mounting bracket (20mm post) | |
| | |
| Coaxial focusing block w/quadruple nosepiece/Z axis bracket | |
| Coaxial focus block with quadruple nosepiece for Plan Epi Brightfiled objectives, (RMS 20.32 mm THREAD x 36 TPI) includes mounting racket for 38mm post (MAC-11/PT#2) and requires mounting brackets (MA807)for Z axis digital indicator. Optional 20mm bracket available. | |
| Coaxial focus block with quintuple nosepiece for Plan Epi BF/DF obj. | |
| Coaxial focus block with mounting bracket without nosepiece | |
| Coaxial focus block with quint.N.P. paint black for Plan Epi BF/DF obj | |
| Coaxial focus block part w/o nose- piece & mounting bracket (black) | |
| Coaxial focus block part w/mounting bracket( MA807/10)w/o nosepiece | |
| Coaxial coarse & fine focus block w/BF/DF quadruple nosepiece | |
| 20mm red filter, 1.8mm thick | |
| Focusing block 84.5mm Inner Diameter fits EMZ,EMF,EMT models in white color | |
| Focusing slide block w/integral illuminator port | |
| Illuminator sleeve & clamp screw assembly | |
| | |
| | |
| | |
| Bolt, acorn nut and washer (Pr.) | |
| Chrome seat for GEM Clamp, threaded for GEM stands. | |
| Stand with brightfield/darkfield switch | |
| Push on/off button switch | |
| GEM Stand for use with EM series turret body, 30 watt tungsten bulb | |
| Plastic grommet (MTT PART#GEMT/PT7) | |
| Reflector bowl with bulb socket & bulb for GEM stereo | |
| Reflector bowl with socket only for GEM stereo | |
| GEM stand for use with EM series turret body, 30W tungsten bulb,220V | |
| GEM stand for use with EM series turret body, 30 watt tungsten bulb | |
| GEM stand for use with EM series turret body, w/o MA350/10 30W bulb | |
| | |
| Swivel GEMT/PT stand for use with EM turret body, 30 watt tungsten blb | |
| Kits for swivel GEMT stand | |
| Swivel GEMT/SVH stand for use with EM turret body, 30W halogen, rheost | |
| Swivel GEMT/SVH Stand for use w/EMT Turret Body 220V | |
| GEM stand with bright/darkfield switch | |
| Swivel GEMT/PT stand, with variable rheostat and 30 watt tungsten bulb | |
| Gem stand with brightfield/darkfield switch | |
| GEM stand for use with EM series zoom body, 30 watt tungsten bulb | |
| | |
| GEM stand for use with EM series zoom body,30W tungsten bulb, 220V | |
| Swivel GEMZ/SV stand for use with EM series zoom stereo body,30W tung | |
| Kits for swivel GEMZ stand | |
| Swivel GEMZ/SVH stand for use with EM stereo zoom body, 30 watt haloge | |
| Swivel GEMZ/SVH stand for use with EM stereo zoom body, 220V | |
| Gem stand with bright/darkfield switch 110V | |
| Gem stand with bright/darkfield switch 220V | |
| Swivel GEMZ/PT stand, variable rheostat, 30 watt tungsten bulb | |
| 0.7X-4.5X GEM zoom stereo binocular body | |
| 0.7X-4.5X GEM zoom stereo trinocular body | |
| 1X & 2X Binocular Turret Stereo Microscope Body with 10x eyepiece (paired) magnification, 10x and 20x,eyetube angle 45°, eyetube diameter: 30.5mm F.O.V-23mm, W.D. 120 mm | |
| 1X & 2X Binocular Turret Stereo Microscope Body with 10x eyepiece (paired) magnification, 10x and 20x, eyetube angle 45° , eyetube diameter: 30.5mm F.O.V-23mm, W.D. 105 mm on GMZ/PT stand for jewelry, inclinaeble 0-45°, top fluorescent light, Transmitted Halogen BF/DF switchable light. GEM clamp and Iris Diaphragm | |
| 1X & 3X Binocular Turret Stereo Microscope Body with 10x eyepiece (paired) magnification, 10x and 30x, eyetube angle 45° , eyetube diameter: 30.5mm F.O.V-23mm, W.D. 105 mm, uses EM-40/OC10- 10X eyepiece pair | |
| 1X & 3X Binocular Turret Stereo Microscope Body with 10x eyepiece (paired) magnification, 10x and 30x, eyetube angle 45° , eyetube diameter: 30.5mm F.O.V-23mm, W.D. 105 mm on GMZ/PT stand for jewelry, inclinaeble 0-45°, top fluorescent light, Transmitted Halogen BF/DF switchable light. GEM clamp and Iris Diaphragm | |
| 2X & 4X Binocular Turret Stereo Microscope Body with 10x eyepiece (paired) magnification, 20x and 40x, eyetube angle 45° , eyetube diameter: 30.5mm, F.O.V-23mm, W.D. 105 mm | |
| 2X & 4X Binocular Turret Stereo Microscope Body with 10x eyepiece (paired) magnification, 20x and 40x, eyetube angle 45° , eyetube diameter: 30.5mm, F.O.V-23mm, W.D. 105 mm | |
| 76MM GMZ/GMT stand for Jewelry, Track Length 250mm, Base dimension 310 x 250 x70mm. Inclinable and vertical direction 0-45: oblique top U shaped fluorescent incident light, Transmitted Halogen Brightfield/Darkfield switchable light. GEM calm and Iris Diaphragm | |
| 85MM GMZ/GMT stand for Jewelry, Track Length 250mm, Base dimension 310 x 250 x70mm. Inclinable and vertical direction 0-45: oblique top U shaped fluorescent incident light, Transmitted Halogen Brightfield/Darkfield switchable light. GEM clamp and Iris Diaphragm | |
| Binocular Zoom Stereo, magnification 6.7x-45x, paired 10x eyepiece, 45° angle eyepiece, Professional Jewelry GMZ stand inclineable with transmitted Brightfield or Darkfield slider and U-shaped fluorescent incident (top) light. Built in iris diaphragm and gem clamp, Input voltage AC 100-240v 50/60 HZ, output voltage DC 12V, 30W USA 3 Pins. | |
| Trinocular 6.7-4.5X Zoom Stereo Microscope with 76mm focus holder with High Eyepoint 10x Eyepiece and built-in 0.5x c mount, zoom ratio 1:6.7 45° Eyetube Angle. Gemological stand with Iris diaphragm, Gem clamp, Incident Obligue fluorescent light and Halogen BF/DF transmitted light, AC 110-220V 50/60 HZ Optional C' mount is MA151/EM41/03 or MA151/EM41/05 | |
| Binocular Zoom Stereo, magnification 6.7x-45x, paired 10x eyepiece, 45° angle eyepiece, Professional Jewelry GMZ stand inclineable with transmitted Brightfield or Darkfield slider and U-shaped fluorescent incident (top) light. Built in iris diaphragm and gem clamp, Input voltage AC 100-240v 50/60 HZ, output voltage DC 12V, 30W USA 3 Pins.Binocular Zoom Stereo, magnification 6.7x-45x, paired 10x eyepiece, 45° angle eyepiece, Professional Jewelry GMZ stand inclineable with transmitted Brightfield or Darkfield slider and U-shaped fluorescent incident (top) light. Built in iris diaphragm and gem clamp, Input voltage AC 100-240v 50/60 HZ, output voltage DC 12V, 30W USA 3 Pins. | |
| Trinocular Zoom Stereo Microscope 6.7x-45x paired 10x eyepiece. 45° angle eyepiece, Professional Jewelry GMZ stand inclineable with transmitted Brightfield or Darkfield slider and U-shaped fluorescent incident (top) light. Built in iris diaphragm and gem clamp, Input voltage AC 100-240v 50/60 HZ, output voltage DC 12V, 30W USA 3 Pins. | |
| Fix Screw for 76mm Scope Holder (for Scope Head) | |
GMZT/PT/76/FOCUS ASSEMBLY | GMZT/PT/85 focus assembly 85 mm holder for the GMZT/PT/85 | |
| GRS Articulating Stand and table mount for jewelry engraving and industrial applications with 85mm focus block | |
| GRS Articulating stand and table mount (GRS/Acrobat) with Trinocular mount kit (GRS-TR/ADAPTER) for EMZ-8TR microscope bodies for engraving and industrial applications with 85mm focus block | |
| Mount kit to use with EMZ-8TR models with black box for GRS/Acrobat stands | |
| | |
| 11.6"monitor HDMI,20 "hdmi cable, 90° HDMI adapter, power spliiter cable, 2 mounting plates, 4 wing nuts | |
| Complete Mounting bracket ( 2) and wing nuts screw ( 4) and allen screws ( 4) for HD monitor install for all HD cameras | |
| HDMI camera 15fps, 5MP 1/3" chip CMOS, with power transformer, cable, USB cable, SD card and application CD | |
| HDMI camera 15fps, 5MP 1/3" chip CMOS with power transformer, cable, USB cable, SD card and application CD with 11.6" HDMI Monitor | |
| (Discontinued) High Definition 2MP color digital camera, software,HDMI/USB output | |
| 3 MP, USB 3.0 camera, USB cable and application CD for image capture and annotation and basic measurement package | |
| HDMI/USB 2.0 3.5 MP CAMERA WITH SOFTWARE AND 30 FPS AND FOCUSING CHIP. | |
| HDMI/USB 2 MP camera, 6MP, 60fps/HDMI, 30 fps/ USB- MOUSE, 1/3 CHIP CMOS, SD CARD, HDMI-HDMI CABLE,USB 2.0-USB 2.0 CABLE, POWER CABLE, METRICS MEASUREMENT/ ANNOTATION SOFTWARE -PC COMPATIBLE WITH SOFTWARE | |
| HDMI/USB 2.0 camera, 6 MP , 3264x1840 static, 1920x 1080 Dynamic 60fps by HDMI, 30fps by USB 2.0 , 1 / 2.8” CMOS chip with , SD card , HDMI-HDMI cable, USB 2.0-USB 2.0 cable, power supply, power supply splitter cable and measurement software | |
| HDMI/USB 2 MP camera, 6MP, 60FPS/HDMI, 30 FPS/ WITH 11.6"SCREEN, USB- MOUSE, 1/3 CHIP CMOS, SD CARD, HDMI-HDMI CABLE,USB 2.0-USB 2.0 CABLE, POWER CABLE, METRICS MEASUREMENT/ ANNOTATION SOFTWARE -PC COMPATIBLE WITH SOFTWARE | |
| HDMI/USB 2.0 camera, 6 MP , 3264x1840 static, 1920x 1080 Dynamic 60fps by HDMI, 30fps by USB 2.0 , 1 / 2.8” CMOS chip with 11.8 HDMI monitor, SD card , HDMI-HDMI cable, USB 2.0-USB 2.0 cable, power supply, power supply splitter cable and measurement software | |
| HDMI/USB 2.0, 6 MP camera, 60fps/HDMI, 30 fps, USB- MOUSE, 1/3 CHIP CMOS, SD CARD, HDMI-HDMI CABLE,USB 2.0-USB 2.0 CABLE, POWER CABLE, BASIC CD MEASUREMENT/ ANNOTATION SOFTWARE -PC COMPATIBLE | |
| HDMI/USB 2.0. 6MP CAMERA WITH 11.6" SCREEN, 60 FPS/ HDMI, 30 FPS/USB, SD MOUSE 1/3 CHIP CMOS, SD CARD, HDMI-HDMI CABLE,USB 2.0-USB 2.0 CABLE, POWER CABLE, BASIC CD MEASUREMENT/ ANNOTATION SOFTWARE -PC COMPATIBLE | |
| 16MP Color Microscope Camera 1/2 3"CMOS USB 3.0 | |
| 16 mp, USB 2.0 WITH MEASUREMENT SOFTWARE | |
| (T.S.L../DISCONTINUED) 2.0 MP Camera with HD preview and still shot. 1 / 2.8” CMOS sony IM x 291 super wide dynamic CMOS sensor. 0.3x C’ mount required. 12.5”Monitor (a-si TFT-LCO/IPS). 1920x1080P60, HDMI, image output interface mini HDMI, Rotatable displayer height angle | |
| (E.O.L./DISCONTINUED) 2MP 1920 x 1080, 60fps HDMI/ USB 2.0 camera, 1/3" CMOS, C" mount recomendation 0.3x with software | |
| HD2500T is a 5MP color 2/3” CMOS Sensor, 3.45x 3.45 µm pixels. Resolutions 2448x2048, USB 3.0, 35 fps. Image acquisition for editing measurement, real time depth of field fusion, real time image stitching exposure, gain, noise reduction, gamma, flat field correction, jpg/png, tiff, MAC WINDOWS, LINUX compatible | |
| HD2600T is a 6MP color Sony 1/1.8” CMOS Sensor, pixel size 2.4 x 2.4 µm, Resolution-3072x 2048, USB 3.0, 40FPS. Image acquisition for editing measurement, real time depth of field fusion, real time image stitching exposure, gain noise reduction, gamma, flat field correction, jpg/png, tiff, MAC WINDOWS, LINUX compatible | |
| Android Touch screen tablet with 5 MP camera built in, 11.5’x 10’ screen and 0.5x c’ mount adapter, fits 23.2 mm trinocular tube. Still and video audio capability with mini SD card slot and mini interface, USB mouse capability and USB 2.0 interface. Includes two eyepiece adapter rings to fit 30.00 mm and 30.5mm eyepiece (HD750-MTS AND MA151/35/05/HD3000TS) | |
| 4K resolution, USB 3.0, GigE output, internet live steam broadcasting | |
| 4K resolution, USB 3.0, GigE output, internet live steam broadcasting with monitor | |
| High-performance HDMI Multi-Interface CMOS Camera featuring Sony IMX678(C) 1/1.8 " sensor, requires a 0.5x C' Mount adapter with resolution up to 8MP, supporting HDMI, USB3, SD, LAN multiple output methods. HD4500K is Meiji Techno 4K Camera ( 8 MP) | |
| | |
| (E.O.L./DISCONTINUED-replaced by HD-LX105TS) 2 MP Color Camera, Wifi Mouse and 9" High Resolution Monitor, Full HD, USB compatible, TF-SD card slot, 30fps, USB Output, power adapter, wifi mouse | |
| 2 MP Color Camera, Wifi Mouse and 11.6”High Resolution 1920x1080 Color Retina Monitor, 60fps @ 1920x1080, Wifi Mouse, Power adapter, 11.6 “screen, HDMI and USB output parts, SD card slot | |
| (E.O.L./DISCONTINUED) 5 MP Color Camera, Touch screen, 9.7" High resolution (2048x1536) Color LCD,30 fps, HDMI and USB output, LCD Display, power adapter | |
| 16 MP color High Resolution Touch Screen Camera (1920x1080) Color Retina monitor Win. 10 Smart Camera, 11.6 inch screen, Power adapter, (TF) 30fps, HDMI and USB Output | |
| 4MP, Back illuminated CMOS camera, 2 “ CMOS chip, Monochrome 2048x2048, Peltier Cooling System Class II (-10 º C ), 25 fps (2048 x 2048), @ 16 bit, USB 3.0 with USB 3.0 cable, Labview/Matlab/Image/T capture software, Window/Linux/Mac compatible M42-T mount/C mount | |
| 0.7X-5X Macrozoom system with 16 LED array illumination powered by USB 2.0 with rheostat, 1x objective 0.4x trinocular eyepiece on a 205mm x 273mm ergonomic slope stand with a 32 mm post on a coarse focus block and HDMI/USB camera ,can take still shot... | |
| 0.7X-5X Macrozoom system with 16 LED array illumination powered by USB 2.0 with rheostat, 1x objective 0.4x trinocular eyepiece on a 205mm x 273mm ergonomic slope stand with a 32 mm post on a coarse focus block and a 5 MP HDMI/ USB 2.0 camera ,can take... | |
| 10.5" High-resolution Color monitor- 8Mega pixel camera- Touch Screen system- C-mount adapting size- S-eye 2.0 analysis software | |
| (T.S.L../DISCONTINUED) Integrated 15" HDMI monitor, USB 2.0, WiFi. USB Mouse/Keyboard HDMI Port with software for MT Series, dovetial mount, can connect to PC/laptop. Not MAC compatible, QR code able | |
| (T.S.L../DISCONTINUED) Integrated 4K USB 2.0 camera for Meiji Techno MT Series with dovetail mount for MT series software, 8 M.P. connects to PC or laptop. Not MAC compatible | |
| (T.S.L../DISCONTINUED) Integrated Wifi, USB 2.0 Camera for Meiji Techno MT Series with dovetail mount for MT series software, 8 M.P. connects via WIFI or USB 2.0 to PC/laptop, not MAC compatible | |
| USB 2.0 mouse for all HD1000 HD1500 models | |
| Infinity analyze focus enhancement module | |
| | |
| Circuit board for IM Series (MTT PART# MT/SM#323) | |
| | |
| Flat-top stage for IM7000 series (with 4 screws) | |
| Binocular inverted metallurgical microscopes w/6V,30W halogen | |
| Basic Stand only without eyepiece, objective, filter and head | |
| Ergonomic Binocular inverted metallurgical microscopes w/ 6V,30W halogen
| |
| Trinocular inverted metallurgical microscopes w/6V, 30W halogen | |
| Trinocular inverted metallurgical microscope w/o (2) MA817 10X E.P. | |
| Trino.inverted metallurgical microscope w/o MA872 20X obj. | |
| Bino.metallurgical research scopes- Inverted BF/DF, 12V 50W halogen | |
| Binocular metallurgical research scopes -inverted BF/DF, 12V 50W halogen | |
| Trino.inverted Metall.ERECT BD Epi Plan5X,10X,20X,LWD50X,12V50W HAL | |
| Trinocular Metallurgical Inverted Microscope-BF/DF w/o MA923 (5X) & MA924 | |
| One half mirror only for IM7000 | |
| Printed Circuit Board 6V 30 W Halogen for IM7000/TC5000 series | |
| | |
| USB 3.0 Subra camera is a full HD color microscopy camera;CMOS color, 2/3", 10.58 mm ;8 MPix (4K); 1920 x 1080 (50 fps), 2560 x 1440 (30 fps) up to 3840 x 2160 pixel (30 fps); Optical Interface: C-mount | |
| USB 3.0 Subra camera is a full HD color microscopy camera; CMOS color, 1/2”, 3 MPix; 2000 x 1500 (20 fps); Optical Interface C-mount | |
| USB 3.0 Subra camera is a full HD color microscopy camera; SONY back illuminated CMOS color, 1/1.2", 13.27 mm ;2.3 MPix ;5.86 x 5.86 µm ;1920 x 1200 pixel (60 fps) ;Optical Interface:C-mount | |
| USB 3.0 Subra camera is a full HD color microscopy camera; CMOS color, 1", 15.58 mm; 20 MPix; 1800 x 1200 pixel (50 fps) up to 2700 x 1800 pixel (30 fps); Optical Interface: C-mount | |
| USB 3.0 Subra camera is a full HD color microscopy camera;; SONY back illuminated CMOS color, 1/1.2", 13.27 mm; 20.7 MPix ;5.86 x 5.86 µm;1920 x 1200 pixel (60fps); Optical Interface:C-mount | |
| USB 3.0 Subra camera is a full HD color microscopy camera ;SONY back illuminated CMOS monochrome, 1/1.2", 13.27 mm; 2.3 MPix ;1920 x 1200 pixel (60 fps);Optical Interface: C-mount | |
| USB 3.0 Subra camera is a full HD color microscopy camera; CMOS color, 2/3", 12,75 mm; 2.2 MPix; Full HD 1920 x 1080 pixel up to 2048 x 1084 pixel (30 fps); Optical Interface:C-mount | |
| (E.O.L./DISCONTINUED) Special stand | |
| | |
| | |
| | |
| Wide Surface stand complete with FX holder 20mm | |
| Flange for KBL stand with 3 set screws and bolts that fits a 20mm post | |
| 245 mm Pillar for KBL stand with a blunt flat end ( To be used with a KBL/1 flange) | |
| KBL stand w/o FX focus block | |
| Prior Lumen 200 illumination system (for Nikon) | |
| 6V,2.0A power supply for infinity cameras | |
| | |
| | |
| | |
| 3W LED, 5500K color temperature | |
| | |
| Basic warm stage 4"x4"and controller for biological applications (ambient to 60°C) where the compound magnification is less than 400x | |
| | |
| | |
| | |
| use "LA20515" 6V 2.0A power supply for infinity cameras | |
| Scissors for Microsurgery NAGATA delicate | |
| Mounting flange (MTT# UL/PT#8) | |
| Nomarski DIC slider for reflected light,34mm(W)x90mm(L)x13mm(D) | |
| Ceramic coated flat-top stage (right hand) | |
| Ceramic coated stage w/left hand drop down coaxial controls | |
| Ceramic coated stage w/right hand drop down coaxial controls | |
| Ceramic coated flat-toop stage (left hand) | |
| Ceramic coated stage w/left hand drop down coaxial controls | |
| Ceramic coated stage w/right hand drop down coaxial controls | |
| (E.O.L./DISCONTINUED-2015) Stage plate-metal for U70 Series | |
| Vertical Koehler illuminator with LB100 blue clear,ND13/ND25 filters | |
| Glass stage plate for U80 Series, 104mm x 104mm | |
| LB100 blue clear filter, 46mm unmounted | |
| ND50 Neutral density filter, 4600 unmounted | |
| ND25 Neutral density filter, 46mm unmounted | |
| (E.O.L./DISCONTINUED) Polarizing filter, adjustable, in sliding in metal mount | |
| | |
| Strain free Abbe condenser w/swing out top lens, N.A.1.25 w/iris diap. | |
| (E.O.L./DISCONTINUED-2015..) Vertical Koehler illuminator w/o lamphouse (incl.in U91 & U92) | |
| Plan Apochromat F4X Objective Infinity/0.17, For Biological Upright Microscope, N.A. 0.13, F.L. 24.00 mm, W.D. 17.50 mm. FL = 200 mm, DIN Standard 0.7965" (20.1 mm) Diameter Threads, 36 TPI, 55° Whitworth | |
| (E.O.L./DISCONTINUED) Ceramic coated flat-top stage (left hand) | |
| (E.O.L./DISCONTINUED) Ceramic coated flat-top stage (right hand) | |
| (E.O.L./DISCONTINUED) DUST COVER FOR U50 SERIES-USE MA714 | |
| (E.O.L./DISCONTINUED) HALOGEN LAMP 12V/100W | |
| (E.O.L./DISCONTINUED) Round 110mm dia.,2mm thick metal stage plate insert w/22mm opening | |
| (E.O.L./DISCONTINUED) Spare fuse for 100W halogen illuminator | |
| (E.O.L./DISCONTINUED) Polarizer set for U50 series microscopes | |
| (E.O.L./DISCONTINUED) LB100 blue clear filter, 20mm diameter in slide in metal mount | |
| | |
| | |
| | |
| (E.O.L./DISCONTINUED) ND50 Neutral density filter, 20mm diameter in slide in metal mount | |
| (E.O.L./DISCONTINUED) ND25 neutral density filter, 20mm diameter in metal mount | |
| Apochromat objective 1.25X N.A.0.04, W.D. 3.7mm, Infinity Corrected | |
| (E.O.L./DISCONTINUED) Apochromat objective, F 40X, N.A. 1.30, W.D.??mm | |
| (E.O.L./DISCONTINUED) Aplanatic substage condenser, N.A. 1.40,w/iris diaph.& dovetail | |
| (E.O.L./DISCONTINUED) EWF 10X extra widefield eyepiece, F.N. 24, tube O.D. 30.0mm (each) | |
| (E.O.L./DISCONTINUED) EWF 15X extra widefield eyepiece, F.N.17.5, tube O.D. 30.0 mm (each) | |
| (E.O.L./DISCONTINUED) Polarizer set for U50 Series | |
| | |
| | |
| Ergonomic binocular siedentopf head, erect image for IM7500 | |
| Trinocular siedentopf head, erect image head for IM7500 | |
| (E.O.L./DISCONTINUED) Transformer for 12V/50W & 12V/100W lamphouse,automatic voltage sensing | |
| (E.O.L./DISCONTINUED) Substage condenser with iris diaphgram, N.A. 0.65 for U80 series | |
| (E.O.L./DISCONTINUED) Trinocular siedentoph head, erect image, | |
| | |
| | |
| | |
| (E.O.L./DISCONTINUED) WF20X eyepiece (pair) | |
| (DISCONTINUED) WF20X eyepiece (single) | |
| | |
| Intermediate tube for MT9500 Gout Microscope with Sliding Analyzer (housed below the head) | |
| Rotatable polarizer with full wave plate (Built into stand) | |
| Intermediate tube for MT4000 and MT5000 with analyzer, needs MA915/PT#2 Polarizer | |
| WF10X E.P. w/ reticle 0.1mm for ST, STC, SKT, BM, BMK series | |
| 1X objective for BM (BM/1) | |
| Eyepieces 10X (pair) for EM-50 | |
| Eyepieces 15X (pair) for EM-50 | |
| Eyepieces 20X (pair) for EM-50 | |
| Eyepieces 30X (pair) for EM-50 | |
| Auxiliary lens 0.3X for EM-50 SERIES | |
| Auxiliary lens 0.4X for EM-50 | |
| Auxiliary lens 0.5X for EM-50 | |
| Auxiliary lens 1.5X for EM-50 | |
| Auxiliary lens 2.0X for EM-50.. | |
| 2X objective for BM (BM/2) | |
| C mount adapter with 0.35X for EM-51.. | |
| C mount adapter with 0.5X for EM-51.. | |
| C mount adapter with 1.0X for EM-51.. | |
| | |
| 3.5X objective for BM (BM/35) | |
| C mount adapter with 0.37x lens for MT-430 and EM-33 | |
| C mount adapter with 0.5x lens for MT-430 and EM-33 | |
| 76mm-85mm step Conversion donut adapter to accept EM-30/EM-50 series stereo microscope body, 76mm in diameter | |
| Stage plate frosted glass, 60mm diameter for EMZ-20 series | |
| Stage plate, black/white 60mm | |
| Stage plate frosted plastic, 60mm diameter for EM-30 Series | |
| Phase annuli plate slider for 10X, 20X & 40X for MT-B100 and MT-B300 models | |
| (E.O.L./DISCONTINUED) Bulb 12V, 10W tubular (ST,STC,SKT) (hosobuchi) | |
| Widefield eyepieces WF10X/18mm for MT-30/MT-90 series (each) | |
| 0.5X objective lens for BM | |
| (DISCONTINUED) 1X objective (pair) for STC | |
| Plan EPI LWD 20X objective | |
| Plan EPI LWD 50X Metallurgical objective, 8.2mm W.D. | |
| Metallurgical Plan EPI LWD 100X objective | |
| (DISCONTINUED) 2X objective (pair) for STC | |
| (DISCONTINUED) 3X objective (pair) for STC | |
| (E.O.L./DISCONTINUED) 4X objective (pair) for STC | |
| (E.O.L./DISCONTINUED) 6X objective (pair) for STC | |
| L10X/20 Eyepiece(paired) for MT-50, 51, 53 | |
| (E.O.L./DISCONTINUED) 7X objectives (pair) for STC | |
| Phase contrast observation set for MT-60 and MT-61.Includes a Zernike condenser,green filter, centering telescope 10X,20X,40X,100X oil objective for MT-60/MT-61 brightfield model | |
| Spare single 3W LED for MT-50 models only | |
| Special phototube 23.2 mm diameter with thumb screw for EMZ-8TR | |
| Plan Apo 40X objective N.A.0.75, W.D.0.5mm | |
| U Pan Strain Free 10x objective | |
| Quintuple nosepiece for MT7000, MT8000, IM7000 models and FU-1000 Focus blocks with 20.1mm diameter threads, DIN Standard 0.7965" 36TPI, 55 degree whitworth | |
| B.D. Quintuple nosepiece for MT7500, MT8500, IM7500 models and FU-3050 Focus blocksmm diameter threads, 36TPIU, 55 degree whitworth | |
| (DISCONTINUED) Bulb 12V 10W (Old BM series) single contact bayonet. | |
| (DISCONTINUED) Wooden cabinet for SKT-BT / SKC-BT /GS2000 series | |
| (DISCONTINUED) Wooden case for TM200 series | |
| (E.O.L./DISCONTINUED) Wooden case for TM300 series | |
| (E.O.L./DISCONTINUED) Transmitted light base for BM & BMK | |
| Spare Single 3W LED for MT-40 only | |
| (E.O.L./DISCONTINUED) Wooden case for BM-BMK stereo | |
| (DISCONTINUED) Wooden case for RM series (discontinued) | |
| (E.O.L./DISCONTINUED) Wooden case for ML-POL & ML-ASB | |
| (E.O.L./DISCONTINUED) Wooden case for TM400 series | |
| (E.O.L./DISCONTINUED) Wooden case for Zernike phase set | |
| Camera attachment for ST/STC/BM/BMK fits over 33.0mm eyetube. | |
| Camera attachment for EMT/EMF/SKT fits over 33.0mm eyetube. | |
| Camera attachment for TM200/TM400 fits over 27.5mm eyetube. | |
| Lower part of MA150/20 SLR photo eyepiece mount (Leftover from MA150/20+MA150/PT#2=MA150/50 build) | |
| Camera adapter for EMX stereo, fits over 33.0mm eyetube. | |
| Camera attachment for 25mm O.D. trinocular tubes. | |
| Camera attachment, upper part only for MA150/50 | |
| Camera attachment, bottom part only | |
| Camera attachment with 10X finder eypiece, fits over 25mm O.D. tube. | |
| Camera adapter for older EMZ-1, fits over 39mm diopter tube. | |
| Camera attactment fits over 43mm diopter tube.(EMZ-1,EMZ-5,EMZ-10) | |
| "C" Mount adapter for all Meiji compound trinocular microscopes | |
| "C" mount adapter with 0.3X lens & reticle mount(accepts 21mm dia.ret. | |
| "C" mount adapter with 0.45X lens & reticle mount(accepts 19mm dia.ret | |
| "C" mount adapter with 1.0X lens & reticle mount(accepts 19mm dia.ret. | |
| "C" mount adapter with 0.7X lens & reticle mount(accepts 19mm dia.ret. | |
| "C" mount adapter with 2.5X lens & reticle mount(accepts 19mm dia.ret. | |
| Silver C" mount cap with male threads with set screw | |
| Black C-mount crown part with screw | |
| "C" mount adapter with 1.0X lens | |
| Digital camera adapter 23.2mm | |
| Cannon digital camera adapter-model G6 (25.2mm or 27.2mm OD/23.2mm ID) | |
| Cannon digital camera adapter-model G3,G5(25.2 or 27.2mm OD/23.2mm ID) | |
| Cannon digital camera adapter-model G1,G2(25.2 or 27.2mm OD/23.2mm ID) | |
| (E.O.L./DISCONTINUED-2015) Nikon coolpix adapter | |
| (E.O.L./DISCONTINUED-2015) Nikon digital camera adapter-fits 25.2mm OD or 27.2mm OD/23.2mm ID | |
| Nikon digital camera adapter-model 5400(25.2mm or 27.2mm OD/23.2mm ID) | |
| Nikon digital camera adapter-model 5700(25.2mm or 27.2mm OD/23.2mm ID) | |
| Nikon digital camera adapter-fits 25.2mm OD or 27.2mm OD/23.2mm ID | |
| Olympus digital camera adapter-mod. C-2000,2020,3000,3030,3040,4040etc | |
| Olympus digital camera adapter-fits 25.2mm or 27.2mm O.D./23.2mm I.D. | |
| Olympus digital camera adapter-fits 25.2mm or 27.2mm O.D./23.2mm I.D. | |
| Olympus digital camera adapter-mod. C-560,25.2mm or27.2mm OD/23.2mm ID | |
| Nikon digital camera adapter-model 5000 (fits 25.2mm O.D./23.2mm I.D.) | |
| Nikon digital camera adapter-fits 25.2mm OD or 27.2mm OD/23.2mm ID | |
| Fuji digital camera adapter-fits 25.2mm or 27.2mm O.D./23.2mm I.D. | |
| Sony digital camera adapter-fits 25.2mm or 27.2mm O.D./23.2mm I.D. | |
| "C" mount adapter with 0.3X lens | |
| 0.37X C-Mount Adapter with Adjustable focusing ring fits 23.2mm I.D. | |
| "C" mount adapter with 0.45X lens | |
| "C" mount adapter with 0.5X lens (for use with 1/2" chip CCD camera) | |
| .05X C-mount adapter with focusing ring fits 23.2mm I.D. trinocular tube | |
| 0.5x "C" mount fits 23.2 mm trinocular tube I.D. includes two eyepiece adapter rings that fit 30.0mm AND 30.5mm eyepiece tubes | |
| "C" mount adapter with 1.0X lens | |
| "C" mount adapter with 0.7X lens | |
| "C" mount adapter with 2.5X lens | |
| "C" mount adapter w/0.5X lens (with reticle mount,accepts 19mm and 21 mm reticle | |
| "C"mount adapter with 0.45x lens, fits 30.5mm eyetube for mounting "C" mountable camera on eyetube | |
| Olympus digital camera adapter-mod. C-3030,3040 (25mm O.D./23mm I.D.) | |
| .075X C-mount adapter with focusing ring fits 23.2mm I.D. trinocular tube | |
| | |
| Digital camera adapter 25.4mm | |
| Cannon digital camera adapter-model G6, fits 25.4mm "C" mount thread | |
| Cannon digital camera adapter-model G3,G5,fits 25.4mm "C" mount thread | |
| Cannon digital camera adapter-model G1,G2 (fits 25.4mm C mount thread) | |
| Nikon digital camera adapter-fits 25.4mm "C" mount thread | |
| Nikon digital camera adapter-model 5400, fits 25.4mm "C" mount thread | |
| Nikon digital camera adapter-model 5700, fits 25.4mm "C" mount thread | |
| Nikon digital camera adapter-models 4300,885,fit 25.4mm C mount thread | |
| Olympus digital camera adapter-fits 25.4mm "C" mount thread | |
| Olympus digital camera adapter-fits 25.4mm "C" mount thread | |
| Olympus digital camera adapter-mod. C-560, fits 25.4mm C mount thread | |
| Nikon digital camera adapter-model 5000, fits 25.4mm "C" mount thread | |
| Fuji digital camera adapter-fits 25.4mm "C" mount thread | |
| Sony digital camera adapter-fits 25.4mm "C" mount thread | |
| | |
| Digital camera adapter 30.5mm | |
| Cannon digital camera adapter-model G6, fits 34mm O.D./30.5mm I.D.(EM) | |
| Cannon digital camera adapter-model G3,G5, fits 34mm OD/30.5mm ID (EM) | |
| Cannon digital camera adapter-model G1,G2, fits 34mm OD/30.5mm ID (EM) | |
| Nikon digital camera adapter, fits 34mm OD/30.5mm ID (Meiji EM series) | |
| Nikon digital camera adapter-model 5400, fits 34mm OD/30.5MM ID (EM) | |
| Nikon digital camera adapter-model 5700, fits 34mm OD/30.5mm ID (EM) | |
| Nikon digital camera adapter-moedl 4300,885,fit 34mm OD/30.5mm ID (EM) | |
| Olympus digital camera adapter-fits 34mm OD/30.5mm ID(Meiji EM series) | |
| Olympus digital camera adapter-fits 34mm OD/30.5mm ID(Meiji EM series) | |
| Olympus digital camera adapter-mod. C-560, fits 34mm OD/30.5mm ID (EM) | |
| Nikon digital camera adapter-model 5000,fits 34mm O.D./30.5mm I.D.(EM) | |
| Fuji digital camera adapter-fits 34mm OD/30.5mm ID (Meiji EM series) | |
| Sony digital camera adapter-fits 34mm OD/30.5mm ID (Meiji EM series) | |
| Digital camera adapter 30mm | |
| | |
| Cannon digital camera adapter-model G3,G5, fits 34mm OD/30mm ID, (RZ) | |
| Cannon digital camera adapter-model G1,G2, fits 34mm OD/30mm ID (RZ) | |
| Nikon digital camera adapter-model 5400, fits 34mm O.D./30mm I.D. (RZ) | |
| Nikon digital camera adapter-model 5700, fits 34mm O.D./30mm I.D. (RZ) | |
| Nikon digital camera adapter-model 4300,885, fits 34mm OD/30mm ID (RZ) | |
| Olympus digital camera adapter-fits 34mm OD/30mm ID (Meiji RZ series) | |
| Fuji digital camera adapters-fits 34mm OD/30mm ID (Meiji RZ series) | |
| Sony digital camera adapter-fits 34mm OD/30mm ID (Meiji RZ series) | |
| "C" mount adapter with no lens (EM series) | |
| Coupler for Nikon coolpix 5000 | |
| "C" mount adapter with 0.6X lens for EMZ-8TR and EMZ-13TR | |
| "C" mount adapter with 0.265X lens for EMZ-8TR and EMZ-13TR | |
| 0.3 C" mount for the CZ-1100TR and CZ-1105TR | |
| " C" mount adapter with 0.45X lens for CZ-1100TR and CZ-1105TR | |
| 0.5 C" mount for the CZ-1100TR and CZ-1105TR | |
| C-mount adapter with 0.33x lens for EM-33 | |
| 0.35x c mount adapter with focusing adjustment for EM-41 | |
| C-mount adapter with 0.50x lens for EM-33 | |
| 0.5x C” mount adapter for side mount port of IM4100. | |
| Thumb screws fit MA151 Series & EMZ-2TR & EMZ-5TR | |
| C-mount 0.5x replaces MT Trinocular Tube | |
| C-mount adapter with 0.35X lens for MT-51 | |
| C-mount adapter with 0.5X lens for MT-51 | |
| "C" mount adapter 0.35X for MT-61 | |
| "C" mount adapter 0.45X for MT-61 | |
| "C" mount adapter 1.0X for MT-61 | |
| "C" mount adapter with 0.3X lens, accepts 21mm diameter reticle | |
| "C" mount adapter with 0.45X lens, accepts 19mm diameter reticle | |
| "C" mount adapter with 1.0X lens, accepts 19mm diameter reticle | |
| "C" mount adapter with 0.7X lens, accepts 19mm diameter reticle | |
| "C" mount adapter with 2.5X lens, accepts 19mm diameter reticle | |
| | |
| 2X objective for BMK (BMK/2) | |
| 3.5X objective for BMK (BMK/35) | |
| Drawing attachment, prism type for 25mm tube | |
| (DISCONTINUED) Photo framing reticle 19mm (replaced by MA170) | |
| N.A. 0.65 Condenser for TM200, TM420 and TM420F | |
| (DISCONTINUED) Phase disc diaphragm for TM470 | |
| Disc diaphragm for TM400 series | |
| Iris diaphragm For MA472 condenser TM440,TM450 and TM460 | |
| Iris diaphragm with mounting flange for TM420, TM420F & TM422F | |
| Iris diaphragm for ML2000,ML5000, TM400,TM450,TM460 | |
| (DISCONTINUED) Disc diaphragm w/ phase annulus for TM200 series (TM2/SPD) | |
| (DISCONTINUED) Disc diaphragm for TM200 series (TM2/PT#075-077,TM2/DD) | |
| Calibration scale,25mm long cross- line w/0.1mm graduations numberd 0- | |
| Stagemicrometer for checking alignment of stereo microscopes | |
| Objective micrometer 10mm, 0.1mm | |
| | |
| Funnel stop for 100X objective | |
| ND50 neutral density filter | |
| ND13 neutral density filter (optional) | |
| ND8 neutral density filter,19.5mm in dia.in metal mount,fit25mm slot | |
| Eyeshields for MA406, MA407 (each) | |
| (DISCONTINUED) H5X eyepiece | |
| (DISCONTINUED) H10X eyepiece | |
| (DISCONTINUED) H15X eyepiece | |
| (DISCONTINUED)WF10X eyepiece | |
| (DISCONTINUED) WF10X eyepiece w/pointer | |
| (DISCONTINUED) HWF15X eyepiece | |
| (DISCONTINUED)WF20X eyepiece | |
| (E.O.L./DISCONTINUED) H15X eyepiece WF10X-20X zoom eyepiece | |
| Filar micrometer eyepiece 10X | |
| | |
| (R.O.J.6") 220 volt power cord | |
| Eyepiece micrometer, 0.50" devided into 50 units, 19mm diam. | |
| (E.O.L./DISCONTINUED) H15X eyepiece 4X Achromat objective NA 0.10 | |
| (E.O.L./DISCONTINUED) 10X Achromat objective NA 0.25 | |
| (DISCONTINUED) S20X Achromat objective NA 0.40 | |
| (E.O.L./DISCONTINUED) 10X Achromat objective NA 0.25 S40X Achromat objective NA 0.65 | |
| | |
| (DISCONTINUED) S60X Achromat objective NA 0.85 | |
| (DISCONTINUED) S100X Achromat objective (oil) NA 1.25 | |
| (E.O.L./DISCONTINUED) 10X Phase achromat objective | |
| (E.O.L./DISCONTINUED) DIN Achromat phase obj. 10X, NA0.25 (Par phase) | |
| 40XS Phase achromat objective | |
| (Discontinued) DIN Achromat phase obj. S40X, NA0.65(Par phase) | |
| Cross-line with dotted lines, 19mm diameter | |
| Walton & beckett reticle, 19mm diam | |
| WALTON BECKET RETICLE, 21mm diameter | |
| Eyepiece micrometer, 10mm line divided into 100 units,21mm dia. | |
| Eyepiece micrometer 5mm line divided into 100 units,21mm dia. | |
| Bulb 6V 20W halogen (MA260, MA264H, MA264EX)(No pip,same as GE788) | |
| (E.O.L./DISCONTINUED) Substage illuminator | |
| | |
| | |
| Retaining ring for frosted lens | |
| Bulb 115V 20W (B stand, MA261/35 illuminator for TM200)(Hosabuchi) | |
| Bulb 220V 20W (B stand, MA261/35 illuminator for TM200) | |
| Bulb 115V, 30W minature flood (MA263 illuminator)(Hosabuchi) | |
| | |
| (E.O.L./DISCONTINUED-2015) Free stand illuminator 115V | |
| Free stand illuminator 220V | |
| (DISCONTINUED-2015) Freestanding LED illuminator. Auto voltage sensing. | |
| Bulb 6.5V, 2.75A (ring around base for MA264 illuminator) | |
| (DISCONTINUED) Versatile illuminator 6.5V 2.75A bulb w/transformer,115V | |
| (E.O.L./DISCONTINUEDVersatile illuminator, 6.5V 2.75A bulb w/transformer 220V | |
| | |
| Fuse 3A, 5x20mm, fast blow | |
| Versatile illuminator, 5W LED, with transformer | |
| Illuminator only for MA264/LED | |
| Transformer with case for MA264/LED | |
| (E.O.L./DISCONTINUED) Circuit Board with Rheostat | |
| | |
| LH light housing cord assembly | |
| | |
| | |
| (DISCONTINUED) versatile illuminator 6V 20W, w/transfomer, 115V (discontinued) | |
| (E.O.L./DISCONTINUED Versatile illuminator, 6V 20W, w/transformer, 220V (discontinued) | |
| Transformer w/case for MA264H/200 | |
| | |
| | |
| | |
| Knob only for rotary switch | |
| Lamp housing for MA264H illuminator | |
| Bulb socket for MA264H illuminator- Halogen | |
| | |
| Rotary switch for MA264H transformer | |
| Stud and three link adjustable arm for MA264 illuminator | |
| Lamp socket connector - cord with male plug | |
| Transformer with case for MA268 | |
| Transformer with case for MA268 illuminator | |
| Bulb 6.5V, 2.75A (no ring around base for MA269 Phase Ill. TM200) | |
| (DISCONTINUED) Graduated Mechanical Stage | |
| Specimen Finger with dove tail | |
| Darkfield Condenser (for use w/ 50X oil, w /iris & 100X oil w/ iris) | |
| | |
| Bulb 12V/50W halogen (ML-BD-MET, MS-16, ML5000 50W MODELS, ML9500) | |
| Brightfield/Darkfield illuminator | |
| Vertical illuminator, 12V, 110V | |
| Transformer with intensity control and voltmeter for main voltage 110V | |
| Transformer with intensity control and voltmeter for main voltage 220V | |
| Blue Clear Filter,19.5mm diameter filter in metal mount, fits 30mm filter slot | |
| Green clear filter,19.5mm diameter filter in a metal mount, fits 30mm filter slot | |
| Y48, yellow filter in mount | |
| ND2, neutral density filter in a metal mount | |
| ND8, neutral density filter in a metal mount | |
| ND50 Neutral Density filter,19.5mm diameter filter in metal mount, fits 30mm slot | |
| Incident reflector in MA275 | |
| Clamp screw for MA275 Illuminator | |
| Field iris lever for MA275/100 (new style) | |
| Lamp socket with connector (small pin) for MA275 | |
| | |
| (E.O.L./DISCONTINUED Par Phase condenser w/ Phase annuli for 10X,40X,100X (discontinued) | |
| Darkfield filter (w/ central stop) for use in filter tray, 29.8mm diameter | |
| Darkfield filter (w/ central stop) for use in filter tray, 32.0mm diameter | |
| Eyepiece Micrometer, Cross-line reticle, 19mm diameter | |
| Eyepiece Micrometer, Cross-line reticle, 21mm diameter | |
| Eyepiece Micrometer, 10mm line divided into 100 units, 19mm diameter | |
| Eyepiece Micrometer, 5mm line divided into 100 units, 19mm diameter | |
| Eyepiece Micrometer, 10mm square into 400 parts 0.5mm square, 19mm diameter | |
| Eyepiece Micrometer, 10mm square divided into 100 parts, 19mm diameter | |
| Eyepiece Micrometer, 10mm square into 100 parts 1.0mm square, 21mm diameter | |
| Eyepiece Micrometer, Cross-line reticle, 21mm diameter | |
| Stage Micrometer, 1mm divided into 100 units, 0.01mm | |
| Stage Micrometer, 0.04" divided into 40 units, 0.001" | |
| Stage Micrometer, ruling 0.01mm square | |
| White Frosted Filter, 29mm diameter | |
| Blue Frosted Filter, 29mm diameter | |
| Blue Clear Filter, 29.8mm diameter, unmounted, for transmitted light | |
| Green Frosted Filter, 29mm diameter | |
| Green Clear Filter, 29mm diameter | |
| Polarizing Filter, 29mm diameter | |
| Metal Stage Micrometer, 1mm divided into 100 units, 0.01mm | |
| Graduated Mechanical Stage | |
| Attachable Mechanical Stage | |
| | |
| | |
| Attachable mechanical stage for ML9000,ML-POL/RM-POL,MT9000 series | |
| | |
| Small guide pin (2 required) | |
| Screw to lock down stage to rotating stage | |
| | |
| Adapter to mount MA305/100 on EMZ series | |
| Adapter ring for GEMZ-2, GEMZ-2TR, GEMZ-5, GEMZ-5TR | |
| Adapter ring to mount MA305 to GEMT-4 | |
| Adapter ring to mount MA305 on MA507, MA511
| |
| Adapter to mount MA305 on EMF-1,2, EMT-1,2,EMTR-1,2. (new part# MA515) | |
| Circular fluorescent daylight 8W Bulb, (80-B-DL, 80mm OD, 55mm ID, 4PIN) | |
| Circular fluorescent warm white Bulb, 8W (MA305/100) | |
| Ring fluorescent illuminator with starter, 110v | |
| Starter unit Cord 110V ( Hard wired on MA305/100/PT#2) | |
| Transformer with case 110V with hard wired MA305/100/PT#1 | |
| | |
| White connector 4 pin from trans to fluorescent bulb | |
| Metal Lamp housing only / no bulb or cord | |
| Illuminator only / lamp housing with bulb without starter unit cord | |
| Fluorescent ring illuminator with starter, 220V | |
| Transformer 220V with case | |
| Adapter to mount MA305 to the SMD attachment | |
| Adapter ring to mount MA305 on EMT-3, EMTR-3 | |
| Adapter to mount MA305 on RZ series | |
| Fluorescent tube 4W (for MA309 strip illuminators, GM Series, GEM) | |
| Fluorescent illuminator, 110V w/transformer | |
| Transformer only for MA309/100 w/o external case | |
| Transformer only for MA309/200 | |
| Fluorescent illuminator, 220V, w/ transformer | |
| Transformer in case with cord, plug and switch for MA309/100 | |
| Transformer in case with cord, plug and switch for MA309/200 | |
| | |
| Screw for MA309/PT#8 Acrylic Cover Plate | |
| | |
| | |
| | |
| | |
| | |
| Front Frosted white plastic cover | |
| Rocker switch for transformer | |
| Fluorescent box illu.w/articulating arm & 110V transformer,UL approved | |
| Halogen bulb 6V, 20W (RM, RM/ML POL, ML-MET, MA268, MS-10) | |
| Bulb 115V, 25W (bulb for TM300 series) | |
| Bulb 220V 25W (220V bulb for TM300 series) | |
| B.D. quadruple nosepiece for ML-BD-MET | |
| Spare bulb, 6V 30W halogen | |
| Spare Fuse 3A for halogen illuminator | |
| (DISCONTINUED-2015) Replacement fuse 5A for 100W lamp-house | |
| S.plan 100X objective, dry, infinity, W.D. 0.27mm | |
| (E.O.L./DISCONTINUED) S. plan objective M 60X, NA 0.85, infinity .. | |
| | |
| (E.O.L./DISCONTINUED) B.D.S.plan 4X objective (non standard thread)infinity corrected | |
| (E.O.L./DISCONTINUED) B.D.S.plan 10X objective (non standard thread)infinity corrected | |
| (E.O.L./DISCONTINUED) B.D.S.plan 20X objective (non standard thread) infinity corrected | |
| (E.O.L./DISCONTINUED) B.D.S.plan 40X objective (non standard thread) infinity corrected | |
| B.D.S.plan 60X objective (non standard thread) infinity corrected | |
| (E.O.L./DISCONTINUED) 4X S.plan met. objective, infinity corrected | |
| 10X S.plan met. objective, infinity corrected | |
| 20X S.plan met. objective, infinity corrected. | |
| 40X S.plan met. objective, infinity corrected. | |
| S plan 4X objective, infinity corrected, (VT) | |
| S-plan LWD10X, NA 0.25, infinity corrected (VT) | |
| S-plan LWD20X, NA 0.40, infinity corrected, (VT) | |
| S-plan LWD40X, NA 0.65, infinity corrected, (VT) | |
| S.plan metallurgical 50X objective, infinity corrected | |
| S-plan LWD phase 10X, NA 0.25, infinity corrected (VT) | |
| S-plan LWD phase 20X objective, N.A. 0.40, Infinity Corrected (VT) | |
| S-plan LWD phase 40X objective, N.A. 0.65, Infinity Corrected (VT) | |
| (E.O.L./DISCONTINUED) S-plan Metallurgical objective, LWD 50X, N.A. 0.5, W.D. 6.0mm | |
| Bulb Tungsten 117V, 30W (110 v transmitted light for GEM series) | |
| Bulb 220, 30W (220V transmitted light for GEM series) | |
| DIN HWF10X, Focusing Eyepiece with dotted cross-line reticle | |
| Transmitted Illuminator, 8V/12W frosted bulb, including 2 bulbs | |
| Vertical Illuminator, 8V/15W, clear bulb, including 2 spare bulbs | |
| Teaching Head (Dual viewing head) for TM400 series | |
| (Discontinued)-Teaching Head for RM (dovetail mount) | |
| Oblique illuminator, 8V/15W, clear bulb, including 4 spare bulbs | |
| (Discontinued) Bulb, 8V 12W Frosted (MT5500 measuring microscope) | |
| (Discontinued) Bulb, 8V 15W Clear (MT5500 measuring mircoscope) | |
| (Discontinued) Fluorescent bulb (TM400F series) | |
| (E.O.L./DISCONTINUED) Half silvered bulb, 115V 20W (TM420,TM440,TM470P,TM480P)(Hosabuchi) | |
| (Discontinued) Half silvered bulb, 220V, 20W (TM420,TM440,TM470P,TM480P) | |
| (Discontinued) Half silvered bulb - 115V 30W(TM400 Series) | |
| (Discontinued) Half silvered bulb, 220V, 30W (TM450, TM460, TM490 Series) | |
| Monocular Head for TM400 and TM400F Series | |
| | |
| (E.O.L./Discontinued) Glass stage plate 72mm diameter for MT5500 | |
| (E.O.L./DISCONTINUED) Stage clips, long (paired) for MT5500 | |
| Stage Clips, short for MT5500, (paired) | |
| Attachable Mechanical Stage with drop-down coaxial controls (left hand control) | |
| Spring for Finger Assembly for MA371 | |
| Ball bearing for MA371(10 pcs) | |
| Mounting screw for MA371 stage | |
| Attachable Mechanical Stage with drop-down coaxial controls (Right hand control) | |
| (Discontinued) ELWD Condenser 55mm | |
| (E.O.L./DISCONTINUED) LWD Condenser 21mm (Long Working Distance) | |
| (Discontinued) LWD condenser NA 0.55 with Phase Annulus ( Long Working Distance) | |
| Replacement slider with annulus for MA374 Phase Condenser (VT Inverted) | |
| Frosted Blue filter, 40mm in mount for (VT inverted) | |
| (E.O.L./DISCONTINUED) Clear Green Filter, 40mm in mount (VT inverted) | |
| Hemacytometer Holder and Slide Holder | |
| Attachable Mechanical Stage 112X x 72mm for (VT inverted) | |
| Mechanical Stage, movement 112mm(X) x 72mm(Y) with test plate holder | |
| 60mm Diameter Petri Dish Holder | |
| Slide Glass Holder, 1" X 3" dimensions | |
| Chamber Holder (for 55mm x 80mm chamber) | |
| Petri Dish Holder, 35mm diameter | |
| Petri Dish Holder, 55mm diameter | |
| Petri Dish Holder, 65mm diameter | |
| S.Plan Metallurgical 3X objective, NA 0.075 (MT5500) | |
| | |
| (Discontinued) Inclined Monocular Head (TM200) | |
| Eyepiece Tube for Mono body -MA392 | |
| Triple nosepiece for TM200, TM400 series | |
| Quadruple nosepiece for TM200 and TM400 Series. | |
| Quadruple nosepiece, ball bearing type, for RM, ML2000 Series | |
| MA397/PT#1 spring for nosepiece (MTT# MA397/PT#SPRING) | |
| Nosepiece locking piece, metal, horseshoe shape, with 4 set screws | |
| Quintuple nosepiece, ball bearing type, for ML5000 series | |
| (Discontinued) Binocular Head for RM & ML Series | |
| Center prism for RM Series | |
| Right Hand Prism for MA400 | |
| | |
| (E.O.L./DISCONTINUED) USE MA657-Binocular Head with Erect Image for ML Series | |
| Binocular Head, with Erect Image, with Depolarizer | |
| Trinocular Head with Beam Splitter | |
| | |
| Trinocular Tube/Erect Image | |
| | |
| | |
| Monocular Head for RM and ML Series | |
| DIN HWF10X eyepiece, FN 15mm (ea) | |
| Bottom half of eye tube of the MA406 | |
| KHW10X compensating Eyepiece, Field No. 20, tube O.D. 23.2mm (each) | |
| DIN KHW-10X, Compensating Focusing Eyepiece, Field No.20(ea)(tube OD23.2mm) | |
| Bottom half of eye tube for MA407 | |
| KHW-10X Focusing Eyepiece with Cross-line and Guide Pin (each) | |
| KHW10X compensating E.P.,F.N.20 with Walton & Beckett reticle (each) | |
| HWF15X Widefield E.P.,Field No.12.2 tube O.D.23.2mm (each) | |
| HWF15X Widefield Field No.12.2 with Walton Becket reticle (19mm) | |
| HWF20X widefield Eyepiece, Field No.9, tube O.D.23.2mm (each) | |
| HWF10X focusing Eyepiece with reticle mount Field No.18, tube O.D.23.2mm (each) | |
| | |
| | |
| Lower tube only for MA413 | |
| DIN 10X Focusing Eyepiece with Cross-line reticle | |
| HWF10X-F with set screw with Cross-line (for MC microscope) | |
| DIN HWF10X Focusing Eyepiece with Cross-line Reticle and Guidepin | |
| DIN focusing HWF 10X eyepiece with Walton & Beckett Eyepiece Reticle | |
| Filar micrometer Eyepiece with Inclined Monocular Head | |
| (Discontinued) 4X S-Plan DIN Objective | |
| (Discontinued) 10X S-Plan DIN Objective | |
| (Discontinued) 20XR S-Plan DIN Objective | |
| (Discontinued) 40XR S-plan din obj. (discontinued) | |
| 100XR S-plan din obj. oil | |
| DIN 100X S. Plan Objective with Iris | |
| | |
| DIN 10X Met S.Plan Objective/160- Non Infinity | |
| DIN 20X Met S.Plan Objective/160- Non Infinity | |
| DIN 40X Met S.Plan Objective/160- Non Infinity | |
| DIN 60X Met S.Plan Objective/160-Non-Infinity | |
| DIN l00X Met S.Plan Objective/160-Non-Infinity | |
| (E.O.L./DISCONTINUED-2015) DIN Achromat Phase Objective 10X for Zernike Phase | |
| (DISCONTINUED-2015) DIN Achromat Phase Objective S20X for Zernike Phase | |
| (E.O.L./DISCONTINUED-2015) DIN Achromat Phase Objective S40X for Zernike Phase | |
| (E.O.L./DISCONTINUED-2015) DIN Achromat Phase Objective S100XS for Zernike Phase & Par Phase | |
| 10X S-Plan Objective Din Phase | |
| 20XR S-Plan Objective Din Phase | |
| 40XR S-Plan Phase Objective | |
| 100XR S-Plan Objective Din Phase Oil | |
| (E.O.L./DISCONTINUED) Zernike Phase Condenser | |
| Centering screw 55mm long | |
| Centering telescope, 23.2mm OD included in MT4210L,4310L,4210H,4310H | |
| Centering Telescope, 30.0mm O.D. (included in MT5210H,5310H,5210L,5310) | |
| Green Filter Clear, 32 mm dia. for Zernike Phase | |
| 1.25 Abbe Condenser with 40X Phase Annulus in slider | |
| Strain free Achromat Condenser N.A.1.25 with Iris diapragm filter tray/40X Phase Annulus | |
| PH Annulus and Iris Diapragm | |
| Achromatic Condenser with Iris, filter tray, Centerable, 40X Phase annulus slider | |
| 1/4 Wave-length Test Plate in sliding mount | |
| 1/4 wave-length Test Plate for MT9000 series (20mm x 6mm x 60mm) | |
| First Order Red Compensating Plate in sliding mount | |
| First Order Red Compensating Plate for MT9000 series (20mm x 6mm x 60mm) | |
| Analyzer in sliding mount for ML series Pole (26mm x 81mm) | |
| Analyzer for MT9000 series (26mm x 6mm x 80mm) | |
| (Discontinued) Abbe Condenser 1.25 N.E. (RAM series) | |
| (Discontinued) Condenser with Iris, mounting flange (for TM200,TM420,TM440) | |
| | |
| Condenser without Iris for MA472 | |
| RM condenser set screw for MA472 | |
| 1.4 N.A. Aplanatic Condenser | |
| White frosted, 20.0mm diameter filter in 25mm metal mount | |
| Blue Frosted Filter, 20.0mm diameter in 25mm metal mount | |
| Blue Clear Filter, 19.5mm diameter in metal mount, fits 25mm Filter slot | |
| Green Clear Filter, 19.5mm diameter in metal mount, fits 25mm Filter slot | |
| Filter mount without marking | |
| Bertrand Lens in sliding mount (20mm X 80mm) | |
| Incorrect Part Number..see note, Bertrand lens for MT9000 20mm 6mmm | |
| Rotatable Stage 150mm diameter for ML9000 series and ML9400 series | |
| Lock down screw for rotatable stage for ML9000 and ML9400 | |
| DIN Widefield Eyepiece 10X | |
| DIN WF10X Eyepiece with Pointer | |
| (Discontinued) DIN 4X S.Flat Field Objective | |
| (Discontinued) DIN 10X Silent Field Objective | |
| (Discontinued) DIN S20X S.Flat Field Objective | |
| (E.O.L./DISCONTINUED) DIN S40X S.Fat Field Objective | |
| (Discontinued) DIN S.flat Achromat Objective 60XS N.A .0.85 | |
| (E.O.L./DISCONTINUED) DIN S100X S.Flat Objective, oil | |
| HWF12.5X-F Widefield High Eyepoint, Focusing Eyepiece | |
| DIN HWF 12.5X Eyepiece with Walton & Beckett reticle | |
| DIN HWF 12.5X Widefield High Eyepoint, field No. 15.0 | |
| Quadruple centering nosepiece for ML polarizing microscope forward facing | |
| Hexagon key for Centering nosepiece (each) | |
| Yellow Clear Filter 15mm for MA268 | |
| Polarizing Filter, 19.5mm diameter Filter in Metal mount, fits 25mm filter slot | |
| Polarizing Filter (analyzer fits under head) | |
| 3.3X Photo Eyepiece with 19mm reticle mount | |
| | |
| | |
| | |
| | |
| SWF 10x Eyepiece with MA506 Micrometer | |
| Metal Eyepiece Top Portion only | |
| | |
| Retaining Ring for MA502- 26.5mm | |
| | |
| | |
| | |
| | |
| Eyepiece Micrometer-10mm line divided into 100 units, 25mm diameter | |
| 1.5X Auxiliary lens -W.D. 49mm (for EMZ-1, 2,5,13 models) | |
| 5X SLR Photo Eyepiece (no reticle mount)(Increases Mag.of objective by 5X at the film plane) | |
| Eyepiece Micrometer- 5mm line divided into 100 units, 25mm diameter | |
| Eyepiece Micrometer- 10mm square into 100 parts, 1.0mm each, 25mm diameter | |
| 2X Auxilliary lens W.D. 34mm (for EMZ-1,2,5,13 models) | |
| 2.5X SLR Photo Eyepiece (no reticle mount), Increases Mag. of objective by 2.5X at the film plane) | |
| 1.5 Auxilliary lens (EMT-2,3,4 MA515 adapter needed when mounting to EMT-2) | |
| 2X Auxilliary lens (for EMT-2,3,4) | |
| Adapter for EMT-2 (old part# MA304)(Needed to Attach the MA518, MA527, MA513, MA514 Auxilliary lens to EMT-2 Body) | |
| (Discontinued) Photo framing reticule (replaced by MA541) | |
| 0.5X Auxiliary lens -W.D. 150mm ( for EMZ-1,2,5,13) | |
| Lower parts only of MA517 Auxiliary Lens | |
| 0.5X Auxiliary lens for EMT-2 & EMT-3-(Needs MA515 to mount on EMT-2 mount) | |
| SWF10X Focusing Eyepiece (each) | |
| | |
| SWF12.5X eyepiece (single) | |
| | |
| SWF 30X eyepiece (single) | |
| HSWF10X High-eyepoint, Super Widefield Eyepiece, fits a 30.0mm I.D. EMZ-5H model (paired) | |
| Eyepiece micrometer, cross-line reticle, 25mm diameter | |
| Eyepiece Micrometer 10mm sq. divided into 400 parts,each sq.0.5mm | |
| 0.44X Auxiliary lens, W.D. 181mm, Thread M50, Pitch 0.75 (for EMZ-1,2,5,13) | |
| 0.75X Auxiliary lens, W.D. 97mm, Thread M50, Pitch 0.75 (EMZ-1,2,5,13) | |
| 0.75X Auxiliary lens (EMT-2 & EMT-3) | |
| 0.3X Auxiliary lens, W.D. 252mm, Thread M50, Pitch 0.75( For EMZ-1,2,5,13) | |
| Protective glass for all EMZ models (Except EMZ-12) | |
| Protective glass for EMZ body with MA305 fluorescent illuminator | |
| Protective glass for EMF-1, EMF-2, EMT-1, EMTR-1, EMT-2 and EMTR-2 | |
| Articulating fiber light guide adapter fits MA571 SMD attachment | |
| HSWF15X High Eyepoint Eyepieces (pair), Field No. 16.0 | |
| HSWF15X Eyepiece (single) | |
| Protective cover glass for RZ objectives | |
| Protective glass for EMT-3, EMTR-3, EMT-4 and EMTR-4 | |
| (E.O.L./DISCONTINUED) Wooden cabinet for EMTR | |
| (Discontinued) Wooden cabinet for EMTR | |
| Eyepiece Micrometer, Cross-line reticle with 0.1mm graduations,19mm diameter | |
| Eyepiece Micrometer, Cross-line with 0.1mm graduations, 21mm diameter | |
| Photo Framing Reticule, 25mm diameter | |
| Eyepiece Micrometer, Cross-line reticle with 0.1mm graduations, 25mm diameter | |
| Photo Framing Reticle for MA150/60 camera attachment | |
| Photo Framing Reticle for photomicrographic camera | |
| 0.3X Auxiliary lens, W.D. 326mm, Thread M50,Pitch 0.75 (for EMZ-10 and Z-7100) | |
| 0.5X Auxiliary lens, W.D. 194mm, Thread M50, Pitch 0.75 (for EMZ-10 and Z-7100) | |
| 0.75X Auxiliary lens, W.D. 127mm, Thread M50,Pitch 0.75 (for EMZ-10 and Z-7100) | |
| 1.5X Auxiliary lens, W.D. 64mm,Thread M50, Pitch 0.75 (for EMZ-10 and Z-7100) | |
| 2.0X Auxiliary lens, W.D. 44mm, Thread M50, Pitch 0.75 (for EMZ-10 and Z-7100) | |
| Rotatable Polarizing Filter in mount, Thread M50, Pitch 0.75 (for EMZ bodies except EMZ12) | |
| Polarizing Filter in mount (for EMT-1/2, EMTR-1&2 & EMF-1&2 bodies) | |
| Polarizing Filter in mount (for EMT-3&4 and EMTR-3&4 bodies) | |
| Rotatable Polarizing Filter in mount (for EMZ-12,EMZ-12TR,EMZ-12TRD) | |
| Rotatable Polarizing Filter (Analyzer) in mount for RZ objective | |
| 4" Extension Pillar Aluminum with threads for P/PB/PBH/PKL/PLS stands | |
| End Adapter for connecting 5/8" diameter mounting pin of FS or FSC holder to universal stands (Black) | |
| "T" type chrome screw to secure FS or FSC holder to MA552 | |
| Adapter to fit Fiber Ring/LED Ring/Fluourescent Ring light on EMT-1&2, EMTR-1&2, EMF-1&2 | |
| Adapter to fit Fiber Ring/LED Ring/Fluorescent Ring Light on EMT-3, EMTR-3, EMT-4, EMTR-4 | |
| Adapter to fit MA964 LED ring illumination, on EMF-1,2,EMT-1,2,2TR,EMTR-1 | |
| (E.O.L./DISCONTINUED) Iris diaphragm with adapter for GS series | |
| Gem clamp for GM series (ABH/1 & ABZH/1) | |
| Gem clamp for GEMZ & GEMT stands (GEM series) | |
| | |
| | |
| Iris Diaphragm with adapter ring for GEMZ and GEMT (40mm) | |
| (E.O.L./DISCONTINUED) Iris Diaphragm with adapter ring for GM series (35mm) | |
| Iris Adapter ring for MA556 (35mm) | |
| Iris Adapter ring for GEM stand (40mm) | |
| (E.O.L./DISCONTINUED) Iris Adapter ring for GM stand | |
| Supplementary Lens 0.4X for EMZ-10 & Z-7100 | |
| Bulb 6V, 1.2A -Incident light for AB,ABZ,B,BM, BMK,PB)(Hosobuchi) | |
| Bulb 6V 1.2A -Transmitted light for AB,ABZ,B,PB)(Hosobuchi) | |
| Blue Filter Frosted, 27mm diameter | |
| Frosted Blue Filter, 31mm diameter (for PB/PBH/AB/ABZH) | |
| Blue Filter, 40mm diameter( fits PB /PBH /ABH/ABZH series transmitted light bases) | |
| Graduated Mechanical Stage for EM series | |
| Graduated Mechanical Stage wtih glass stage plate for RZT and RZBD (need MA760) | |
| Glass stage plate for MA564/05, 74mm X 96mm clear glass rectangular plate | |
| Graduated mechanical stage w/o glass plate | |
| | |
| Ungraduated Mechanical Stage (for EM series and RZP stand) | |
| Ungraduated Mechanical Stage with clear glass plate (need MA760) | |
| 3.8mm balls, 28 pcs (Bearings) | |
| Complete Stage clip (for MA565R) | |
| Milk-white Filter, 40mm (for PBH-M) | |
| Acrylic Circular Stage Plate frosted 94.5mm diameter | |
| Black & White Circular Plastic stage plate, 94.5mm diameter | |
| Clear Circular Glass Stage Plate, 94.5mm diameter | |
| Halogen bulb 6V 10W (Incident and Transmitted) | |
| (E.O.L./DISCONTINUED-2015) SMD attachment, oblique viewing attachment with .3X lens and .44X for vertical observation (for EMZ-5 & EMZ-5TR) | |
| Replacement Mirror (fixed), for MA571 | |
| Upper locking screw for MA571 | |
| Lower locking screw for MA571 | |
| SMD/pt mirror adjustment clamp screw for MA571 | |
| Rotatable fitting screw assembly for MA571 | |
| Mirror with door & spring assembly for MA571 | |
| Mirror with door for MA571 | |
| Upper adapter ring for MA571 | |
| Indicator Pointer for MA571 | |
| | |
| Mirror only, 46 x 44 x 4.07mm used on fixed side for MA571 | |
| Mirror only, 36 x 44 x 4.07mm used on moving side for MA571 | |
| Gliding stage 13.78" X 10.63" X-Y travel (350mm X 270mm) | |
| Stage lock screws for MA574 (large) | |
| Ball bearing for MA574 (10 pcs) | |
| Retaining strips 240mm for MA574 | |
| Screw for stopper for MA574(small) | |
| Roller guide for MA574 (triangles) | |
| | |
| (E.O.L./DISCONTINUED) Sliding stage 7.87" X 4" travel (200mm X 100mm) | |
| (E.O.L./DISCONTINUED)Leica adapter plate to mount EM body on Leica ER or E arm | |
| Adapter Ring for Iris diaghram (for GEMZ or GEMT stand) | |
| Graduated Mechanical Stage, 50mm X 75mm movement with coaxial controls | |
| Graduated Mechanical Stage, with clear glass plate with coaxial controls | |
| Measuring Stage, 50mm x 50mm (X-Y) travel, with rotatable circular stage | |
| TV Camera Adapter for MT5500 (requires MA151/10 also) | |
| Vertical Illuminator (for MT5500) | |
| | |
| (Discontinued) Binocular head for MT5500 | |
| Bulb 115V, 15W frosted (transmitted light for GS2000 series) | |
| Bulb 115V, 15W frosted (PB-M stand) | |
| (E.O.L./DISCONTINUED) Adapter to mount FL180/10 on EMX | |
| Stage clips (pair) for P/PB stand (PB/PT#30-32),PLS,PKL,RZT,etc. | |
| Ungraduated mechanical stage, 100mm x 100mm movement | |
| Ungraduated mechanical stage, 100mm x 100mm movement,w/94.5mm dia | |
| Glass plate 94.5 mm thinner for MT8500 | |
| Ungraduated Mechanical Stage, with left hand control | |
| Bearing rail (one piece) for MA594 | |
| Bearing guide with bearing (for only one side) for MA594 | |
| Graduated Mechanical Stage with left side control | |
| Finger Assembly for MA595L, finger points right | |
| Graduated Mechanical Stage with right side control | |
| Finger Assembly for MA595R, finger points to the left (old # MA595R/PT#1) | |
| Finger Assembly (new part# MA595R/P638-646) | |
| Spring for MA595 Mechanical Stage right side | |
| Stage Clip Spring only for MA595R ( Used with ML2000) | |
| Spring for Finger Assembly on MA595R (used for ML2000 Series) | |
| Finger Assembly for Flat top stage (new part# ML/PT#008R) | |
| Flat-top stage with 78mm x 52mm X-Y movement | |
| | |
| | |
| | |
| Spring for Finger Assembly for MA596R(ML5000 Series) | |
| | |
| | |
| Attachable Finger assembly for MA917R, MA917L, MA918R & MA918L | |
| Rubber Eyeshields for EM series (pair) | |
| Polarizing attachment (consisting of E.P analyser and rotating stage) | |
| | |
| Inclined binocular head with depolarizer, non erect image | |
| | |
| | |
| Prism case, prism, screw (R) | |
| Prism case, prism, screw (L) | |
| | |
| Diopter tube assembly for MA602 | |
| | |
| | |
| Dove tail and screws, right | |
| Diaphragm ring for MA 603 head | |
| Dove tail and screws, left | |
| | |
| | |
| Prism house, prism, case, screws | |
| | |
| | |
| | |
| | |
| | |
| | |
| Trinocular head (non erect image) w/beam splitter,w/depolarizer | |
| | |
| | |
| Trinocular tube with locking collar | |
| | |
| Inclined trinocular head for TM400 | |
| | |
| | |
| Polarizer/analyzer set for ML2000 | |
| Polarizer/analyzer set for ML5400, ML5500, ML5800 and ML5950 | |
| Polarizer/analyzer set fro ML5000 | |
| Wooden carrying case for ML series with lock and key | |
| | |
| | |
| | |
| (E.O.L./DISCONTINUED-2015) SM Plan S20X objective | |
| | |
| (E.O.L./DISCONTINUED-2015) SM Plan S60X objective | |
| SM Plan S100X objective, oil | |
| SM Plan 100X objective with funnel stop (Use with MA661/674 condenser) | |
| SM Plan Phase 100X objectiv, oil (discontinued) | |
| | |
| | |
| | |
| 100X Din Plan objective, oil | |
| S.Plan achromat 4X obj. infinity corrected, N.A. 0.10, W.D. 15.9 | |
| S.Plan achromat 10X obj. infinity corrected, N.A. 0.25, W.D. 7.3 | |
| S.Plan achromat S40X obj. infinity corrected, N.A. 0.65, W.D. 0.43 | |
| S.Plan achromat S100X obj.infinity corrected, N.A.1.25, W.D.0.12 | |
| Plan achromat 5X objective | |
| SM Plan strain free 4X objective | |
| SM Plan strain free 10X objective | |
| SM plan 10X dispersion staining objective, 160mm Non Infinity | |
| SM Plan strain free 20X objective | |
| (E.O.L./DISCONTINUED) SM Plan 20X dispersion staining objective | |
| SM Plan strain free 40XS objective | |
| SM Plan strain free 60X objective | |
| SM Plan strain free 100XS objective oil | |
| Binocular pol head for ML9000 series | |
| Trinocular pol head for ML9300 series | |
| | |
| (DISCONTINUED) Lens tissue | |
| Transformer only 115V for MA651/100, and COX illuminator for RZ Series | |
| Cable connector, large (male & female)(=MA651/05/PT13) | |
| Cable conector, small (male & female) (=MA651/05/PT#SMF) | |
| Female cable connector (small) | |
| Male cable connector (small) | |
| Male & Female cable connector (small) (=MA651/05/PT#S) | |
| Male cable connector (large) | |
| Male & female cable connector (large) (=MA651/05/PT#L) | |
| Female cable connector (large) | |
| Transformer only 220/240V,main voltage secondary voltage 6V 30W, for MA651/100 and COX for the RZ Series | |
| Vertical koehler illuminator for ML7000 requires MA651/05(110V) if mounting separate from ML7000 | |
| Transformer 220V only for MA651/200 | |
| Vertical koehler illuminator 220V for ML7000, requires MA651/10(220V) if mounting separate from ML7000 | |
| Bulb socket assembly w/cord MTT part# MA651/PT#2) | |
| | |
| (Use MA651/PT#1) Lamp socket with cord | |
| Lamp house with field and aperture iris diaphragms and tube lenses | |
| Lamp house enclosure w/o bulb assembly | |
| | |
| | |
| Auxillary lens 0.7X for EMX-1, (300mm) | |
| Quartz wedge 6 order for ML9000, ML9400, ML9700 | |
| Quartz wedge, 6 order, ungraduated for MT9000 series (20mmx6mmx130mm) | |
| Quartz wedge, 6 order, graduated for MT9000 or MT9900 series | |
| Quartz wedge 6 order graduated for ML9000,ML9400, ML9700 | |
| Quartz wedge, 6 0rder, graduated for MT9000 series (20mmx6mmx130mm) | |
| Quartz wedge-6 order graduated for MT9900 | |
| (E.O.L./DISCONTINUED) Trinocular head, erect image for ML2000 and ML5000 series | |
| Trinocular head, erect image, with depolarizer for ML7000 and ML8000 series | |
| Binocular head, erect image, for ML9000 | |
| Binocular head, erect image | |
| Binocular head, erect image w/depolarizer | |
| Protective glass for EMX, EMZ-12, EMZ-12TR, EMZ-12TRD | |
| Non-shattering protective glass for EMZ-12 and EMX-1 | |
| Abbe achromat condenser 1.25 NA w/iris diaphragm, 30mm filter tray | |
| Achromatic condenser with MA278 | |
| | |
| Top condenser element in mount | |
| Abbe achromat condenser w/o iris | |
| Abbe achromat condenser w/o iris & element | |
| (Discontiuned) Substage condenser 1.25NA w/phase annulus in sliding mount | |
| Achromatic condenser N.A.1.25 with iris dia.filter tray/40Xph.annulus | |
| (Discontinued) Slider with darkfield stoppers | |
| Strain free achromatic N.A.1.25 condenser with iris and filter tray | |
| Erect image trino body for polarizing microscope | |
| Polarizing plate for use with PB,PBH,AB,ABH,ABZH,PKL,PLS bases | |
| First order red plate for use with MA667 polarizing plate | |
| Funnel stop for SM plan 100X | |
| Depolarizer in mount, 19mm diameter to fit MA603/05,MA647,MA648 heads | |
| Darkfield stop to fit MA661 achromatic NA 1.25 condenser | |
| Attachable clinical specimen holder for MA596R,MA596L,MA917 & MA918 | |
| | |
| Polarizer in mount (for use with incident illuminator) | |
| Quartz Depolarizer in mount, 17mm diameter | |
| Adapter to mount RMS objective to BD nosepiece | |
| Adapter to mount RMS thread to BD nosepiece | |
| Replacement longer RZ Pillar 500mm long, 32mm diameter | |
| Analyzer in sliding mount for ML9400 series | |
| (Discontinued) 4X/0.10 BF semi planachromat objective | |
| (Discontinued) 10X/0.25 BF semi planachromat objective | |
| 20X/0.40 BF semi planachromat objective, W.D. 6.1mm | |
| 40X/0.65 BF semi planachromat objective, spring loaded | |
| 50X/0.95 BF semi planachromat objective, spring loaded,oil | |
| S.plan BF phase 10X/0.25 obj. for use with Zernike type condenser | |
| 100X/1.25 BF semi planachromat objective, spring loaded, oil | |
| S.plan BF phase 20X/0.40 obj. for use with Zernike type condenser | |
| S.plan BF phase 40X/0.65 obj. for use with Zernike type condenser | |
| S.plan BF phase 100X/1.25 obj.for use with Zernike type condenser | |
| | |
| | |
| Dust cover for MT4000 & MT5000 series | |
| Large dust cover for ML5000 (for 50W models) | |
| Dust cover EM 16.5 T X 15.5 W | |
| Dust cover ST 14.0 T X 12.5 W | |
| Dust cover for BM stereos | |
| Dust cover TM4 15.25 T X 14.5 W | |
| Dust cover TM2 15.0 T X 13.5 W | |
| Dust cover TM3 13.5 T X 12.5 W | |
| (Discontinued) Dust cover STM 12.0 T X 10.5 W | |
| Dust cover for ML-BD-MET, MT7520, MT7530, MT8520 & MT8530 | |
| Dust cover for ML7000, MT7000, MT7100, ML8000, MT8000 & MT8100 | |
| | |
| (Discontinued) Dust Cover ML 18.0 T X 21.0 W | |
| | |
| (DISCONTINUED-2015) Zernike phase condenser for use with phase obj.10X,20X,40X & 100X | |
| Zernike phase condenser for use with 10X, 20X and 40X objectives | |
| Bertrand lens in sliding mount for ML9400 series | |
| | |
| Supporter for digital indicator of stem diameter 3/8" | |
| 38 mm Extention rod for digital indicator (38mm X 4.75mm) | |
| S.plan LWD M40X infinity corrected objective, N.A.0.40, W.D. 5.7mm | |
| SM Plan M20X objective NA 0.40, 160/0 | |
| SM Plan M40X objective NA 0.65, 160/0 | |
| 50x50mm X-Y measuring stage to take digital micrometers | |
| 50x50 X-Y measuring stage for trans -mit light take digital micrometer | |
| Transmitted light adapter | |
| UWF 10X eyepiece, high-eyepoint, diopter lock, focusable FN 24 (pc) | |
| RETAINER RING FOR MA730, O.D. 26.6MM, I.D 25.55MM, MALE THREADS | |
| UWF10X eyepiece, high-eyepoint, focusable, w/cross, FN 24 (pc) | |
| UWF15X eyepiece, high-eyepoint, diopter lock, focusable, FN 17 (pc) | |
| UWF15X eyepiece, high-eyepoint, focusable, w/cross, FN 17 (pc) | |
| UWF20X eyepiece, high-eyepoint, diopter lock,focusable, FN 12 (pc) | |
| UWF20X eyepiece, high-eyepoint, focusable, w/cross, FN 12 (pc) | |
| Eyepiece micrometer, for grain sizing in steel | |
| CM plan objective 0.5X for RZ-B | |
| Plan objective 0.75X for RZ-B | |
| Plan objective 1.0X for RZ-B | |
| Plan objective 1.5X for RZ-B | |
| Plan objective 2.0X for RZ-B | |
| | |
| | |
| | |
| Binocular head, ergonomic type | |
| | |
| MA749 SPRING( USE RZ-BR23 WHEN ORDERING FROM JAPAN) | |
| | |
| | |
| RZ Photo/Video attachment 80/20 split, white new design | |
| (Discontinued) Video camera attachment MA151/10 is included | |
| | |
| LB100, blue clear filter in mount for COX vertical illuminator | |
| G533, green clear filter in mount for COX vertical illuminator | |
| Y48, yellow clear filter in mount for COX vertical illuminator | |
| ND2, neutral density filter in mount for COX vertical illuminator | |
| ND8, neutral density filter in mount for COX vertical illuminator | |
| Interference filter 546nm, 29.8mm diameter | |
| | |
| Rotatable stage with polarizer and 1/4 wave plate in sliding mount. | |
| Round 54mm, black annodized thin section plate with 22mm diameter hole (standard wtih MA761 Polarizing Stage) | |
| Optional full Round Stage glass 54mm diameter, for MA761 polarizing stage | |
| 1/4 wave plate in mount for RZ plan objective | |
| Replacement polarizer in sliding mount for use with MA761 | |
| 1st order red compensating plate in sliding mount | |
| (E.O.L./DISCONTINUED) RZ Drawing attachment | |
| Heat filter, 59.8mm diameter, for RZDT stand | |
| Blue filter, 59.8mm diameter for RZT stand | |
| Eyeshields for UWF10X (paired) | |
| Eyeshields for UWF15X (paired) | |
| Eyeshields for UWF20X (paired) | |
| Replacement 1/4 wave plate for use with MA761 | |
| Replacement post for RZT, RZP,RZDT, RZBD stand 325mm, 32mm diameter (Standard Size) | |
| ND50 neutral density filter,19.5mm dia.fileter in metal mount,fit 25mm | |
| ND25 neutral density filter, 15mm diameter in mount | |
| (E.O.L./DISCONTINUED)E.Plan M4X objective NA 0.10, infinity corrected | |
| (E.O.L./DISCONTINUED) E. Plan M10X objective NA 0.25, infinity corrected | |
| (E.O.L./DISCONTINUED) E.Plan M20X objective NA 0.40, infinity corrected | |
| (Discontinued) E.Plan M40X objective NA 0.65, infinity corrected | |
| (E.O.L./DISCONTINUED) E.Plan M60X objective NA 0.85, infinity corrected | |
| (E.O.L./DISCONTINUED) E.Plan M100X objective NA 0.9, infinity corrected | |
| (E.O.L./DISCONTINUED) B.D E.Plan objective 4X (non standard thread) | |
| Supplementary lens 0.28X for EMZ-8TR | |
| Supplementary lens 0.35X for EMZ-8TR | |
| Supplementary lens 0.44X for EMZ-8TR | |
| Supplementary lens 0.5X for EMZ-8TR | |
| Supplementary lens 1.5X for EMZ-8TR | |
| | |
| (E.O.L./DISCONTINUED) )SMD attachment for EMZ-8TR includes built-in 0.35X,0.58X | |
| (DISCONTINUED Mirror and fork for TM200 & TM250 | |
| 2X auxillary lens for EMZ-8TR | |
| Substage condenser for ML8000 | |
| (E.O.L./DISCONTINUED) Oblique illuminator | |
| Vertical koehler ill. for MC scope inc.bl,gr,nd,pol filters | |
| Vertical koehler ill.w/ rot.pol.w/ bl,gr,nd,pol filter w/ led light requires MA927/05/LED | |
| Mounting bracket for digital Z axis indicator-2pcs(for use wi FU-1000) | |
| Mounting bracket with screws 2pcs (for use with FU-3050) | |
| Removable AC electric cord with plug (included in all models) | |
| Removable AC electric cord w/plug for 115V models | |
Removable AC electric cord w/plug for 115V models | AC cord with UL plug for MT-10, MT-30, MT-90 and EM-30 series Education microscopes | |
| Removable AC electric cord w/plug for 220V models | |
| 50X/0.95 BF semi planachromat obj. with iris, W.D. 0.24mm | |
| 100X/1.25 BF semi planachromat obj. with iris, W.D. 0.15mm | |
| Inclined siedentopf type binocular head (30mm I.D.eyetubes) | |
| BINOCULAR HEAD, INCLINED AT 30 DEGREES FOR IM7000 SERIES | |
| (E.O.L./DISCONTINUED) USE MA814/05 | |
| (E.O.L./DISCONTINUED) USE MA814 | |
| Inclined siedentopf type binocular head (30.0mm I.D. eyetubes) | |
| Inclined siedentopf type binocular head (23.2mm I.D.eyetube) | |
| Set screw only to hold seidentopf head | |
| Clamp screws for mounting head | |
| | |
| Inclined siedentopf type trinocular head (30mm I.D. eyetubes) | |
| Inclined siedentopf type trinocular head (23.2mm I.D. eyetube) | |
| Inclined siedentopf type trinocular head (23.2mm eyetube without MA816/05/PT#A | |
| Siedentopf head only (23.2mm I.D. eyetube) | |
| TRINOCULAR HEAD for TC SERIES 30MM I.D. TUBE | |
| (E.O.L./DISCONTINUED) Trinocular head, USE MA816/15 FOR IM SERIES | |
| TRINOCULAR HEAD, 80/20 BEAM SPLITTER FOR IM7000 W/DEPOLARIZER | |
| Trinocular Seidentopf head, inclined at 30 degrees. I.P. adjustment 53 mm to 75mm, graduated diopter on left eyetube (Accepts 30.00 mm I.D. eyepieces) Photo tube with 80/20 beamsplitter. 100% to eyetubes or 80% to phototube and 20% to eyetube in Black | |
| Built in C mount adapter w/inside adapter w/o top photo tube | |
| "C" mount adapter with phototube(TC & IM Models) | |
| Top photo tube only (metal) | |
| Beam splitter lever (MTT# TC-TU12) | |
| Siedentopf tube only for MA815 & MA816 | |
| Trinocular prism house for MA816 | |
| Inclined siedentopf type trino.head for IM Series | |
| Inclined siedentopf type trino.head for TC Series | |
| SWH10X widefield high eyepoint E.P. field no.22,tube O.D.30.0mm (each) | |
| SWH10X eyepiece w/pointer | |
| SWH15X widefield high eyepoint E.P. field no.16,tube O.D.30.0mm(each) | |
| SWF20X widefield high eyepoint E.P. field no.12,tube O.D.30.0mm (each) | |
| TC planachromat 4X obj. infinity/ 1.0, N.A. 0.13, F.L.50.0, W.D. 17.3 | |
| TC planachromat 10X obj. infinity/ 1.0, N.A. 0.25, F.L. 20.0, W.D. 7.6 | |
| TC planachromat 20X obj. infinity/ 1.0, N/A. 0.40, F.L. 10.0, W.D. 7.0 | |
| TC planachromat 40X obj. infinity/ 1.0, N.A. 0.65, F.L. 5.0, W.D. 2.8 | |
| TC planachromat phase 4X objective, infinity/1.0, N.A. 0.13, W.D. 17.3 | |
| TC planachromat phase 10X objective infinity/1.0, N.A.0.25, W.D. 7.6 | |
| TC planachromat phase 20X objective infinity/1.0, N.A. 0.40, W.D. 7.0 | |
| TC planachromat phase 40X objective infinity/1.0, N.A. 0.65, W.D. 2.8 | |
| Plan Semi Apo objective 2.5X, N.A. 0.07, W.D.5.7mm, F.N.24 | |
| Plan Semi Apo objective 4X, N.A. 0.10, W.D. 17.8mm, F.N.24 | |
| Plan Semi Apo objective 10X, N.A. 0.25, W.D. 10.7mm, F.N.24 | |
| Plan Semi Apo objective 20X, N.A. 0.40, W.D. 7.29mm, F.N.24 | |
| Plan Semi Apo objective 40X., N.A. 0.65, W.D.0.5mm, F.N.24 | |
| (E.O.L./DISCONTINUED) Plan Semi Apo objective 50X, N.A. 0.87 oil, W.D.0.28mm, F.N.24 ( Recommend MA836 instead with iris) | |
| Plan Semi Apo objective 50X, N.A .0.87,oil with iris,W.D.0.28,FN 24 | |
| Plan Semi Apo objective 100X,oil, N.A.1.25 W.D.0.23mm,F.N.24 | |
| Plan Semi Apo objective 100X, N.A. 1.25,oil with iris,W.D.0.23,F.N.24 | |
| Plan Semi Apo Phase objective 10X, N.A. 0.25, W.D.10.7mm, F.N.24 | |
| Plan Semi Apo Phase objective 20X, N.A. 0.40, W.D.7.29mm, F.N.24 | |
| Plan Semi Apo Phase objective 40X, N.A. 0.65,W.D.0.5mm, F.N.24 | |
| Plan Semi Apo Phase objective 100X,oil,N.A.1.25,W.D.0.23mm, FN 24 | |
| Semi Apo Plan objective F10X, N.A. 0.40, W.D.1.0mm, F.N.24 | |
| Semi Apo Plan objective F20X, N.A. 0.65, W.D.0.7mm,F.N.24 | |
| (E.O.L./DISCONTINUED) .Semi Apo Plan obj.F40X, N.A. 0.82,(use MA982) | |
| Semi Apo Plan objective F40X, oil, N.A.0.85, W.D.0.2mm, F.N.24 | |
| Semi Apo Plan objective F100X, oil, N.A.1.25, W.D.0.2mm, F.N.24 | |
| TC planachromat F4X obj. infinity/ 1.0, N.A. 0.13, F.L.50.0,W.D. 17.5 | |
| TC planachromat F10X obj. infinity/ 1.0, N.A. 0.30,F.L. 20.0, W.D. 7.5 | |
| TC planachromat F20X obj. infinity/ 1.0, N.A. 0.40, F.L.10.0, W.D. 7.5 | |
| TC planachromat F40X obj. infinity/ 1.0, N.A. 0.60,F.L. 5.0, W.D. 2.9 | |
| TC condenser, N.A. 0.30, W.D. 73mm | |
| TC condenser, N.A. 0.55, W.D.20.5mm (for use with MA823 40X objective and MA828 40X Phase 40X objective) | |
| | |
| LB100 blue clear filter in 51mm mount (for TC5000) | |
| LB100 blue clear filter, 40.0mm diameter, unmounted | |
| LB100 blue frosted filter, 44mm diameter, unmounted | |
| G533 green clear filter in 51mm mount (for TC5000) | |
| Green filter,clear,40.0mm diameter, unmounted | |
| ND25 neutral density filter in 51mm mount (for TC5000) | |
| ND 25 neutral density filter, 40.0mm diameter, unmounted | |
| SWF10X-F focusing E.P.w/reticle mount(w/o reticle),tube OD30.0mm ea | |
| SWH 10X widefield high eyepoint focusing E.P.w/cross-line reticle | |
| WSH-10X focusing E.P. w/cross-line & guide pin | |
| ND25 neutral density filter, 29.8mm diameter | |
| Green interference filter in 51mm mount (for TC5000) | |
| Green interference filter,40.0mm diameter, unmounted | |
| Cobalt clear filter in 51mm mount (for TC5000) | |
| Terasaki plate holder (for 56mm x 87mm Terasaki plate) | |
| (E.O.L./DISCONTINUED)USE MA879-Basic blue excitation filter set | |
| (E.O.L./DISCONTINUED) USE MA879/05-Basic blue excitation filter set mounted in cube(incl.MT6200H,6300H) | |
| (E.O.L./DISCONTINUED) USE MA 880-Basic green excitation filter set | |
| (E.O.L./DISCONTINUED) USE MA880/05-Basic green excitation filter set mounted in cube(incl.MT6200H,6300H) | |
| (E.O.L./DISCONTINUED-2015) Basic U excitation filter set, unmounted | |
| (E.O.L./DISCONTINUED) USE MA 881/05-Basic U excitation filter set mounted in cube(incl.MT6200H,6300H) | |
| Digital camera adapter for TC5000 series (req'd a DCA adapter ring) | |
| Chroma HQ filter set:41001 mounted in Meiji filter cube | |
| 35mm SLR camera attachmet (requires T-2 adapter ring) | |
| Chroma HQ filter set:41002b mounted in Meiji filter cube | |
| Plan Epi objective 5X, N.A.0.10, W.D.20.0mm, F.N.24 | |
| Chroma HQ filter set-41004 mounted in Meiji filter cube. | |
| Plan Epi objective 10X, N.A.0.25, W.D.7.48mm, F.N.24 | |
| (E.O.L./DISCONTINUED) Chroma HQ filter set-41008 mounted in Meiji filter cube | |
| Plan Epi objective 20X, N.A.0.40, W.D.5.20mm, F.N.24 | |
| Chroma filter set-31044v2 mounted in meiji filter cube | |
| Plan Epi objective 50X, N.A.0.75, W.D.0.38mm, F.N.24 | |
| Chroma filter set-41017 mounted in Meiji filter cube | |
| Plan Epi objective 100X, N.A.0.90, W.D.0.37mm, F.N.24 | |
| Chroma filter set-41028 mounted in Meiji filter cube | |
| Attachable mechanical stage with specimen holder,112mm(X)x71mm(Y) | |
| Chroma filter set-41044 mounted in Meiji filter cube | |
| | |
| Stage plate insert for MA875 mechanical stage | |
| "C" mount camera adapter for CCD camera (magnification factor 0.66X) | |
| Glass stage plate for TC-5000 | |
| CHROMA FILTER-AT-GFP/FITC LONGPASS-19002L | |
| CHROMA FILTER-AT-GFP/FITC LONGPASS-19002 MOUNTED IN CUBE | |
| CHROMA FILTER-AT-TRITC/Cy3-LONGPASS 19004 | |
| CHROMA FILTER-AT-TRITC/CY3 LONGPASS-19004 MOUNTED IN CUBE | |
| CHROMAFILTER-AT-DAPI/HOECHST/ALEXAFLOUR 350-3900 | |
| CHROMA FILTER-AT-DAPI/HOECHST/ALEXA FLOUR350-3900 MOUNTED IN CUBE | |
| Chroma filter set # 49006 ET-cy5.. | |
| Chroma filter set # 49006 ET-cy5 in cube | |
| Chroma filter AT-Texas Red/mCherry/AlexaFlour 594 AT560/40x AT635/60m AT600DC | |
| Chroma filter AT-Texas Red/mCherry/AlexaFlour 594 AT560/40x AT635/60m AT600DC mounted in Meiji filter cube | |
| Chroma filter 49306- ET-Red#1Fish with ET580/25x, T600/pxr, ET625/30m | |
| Chroma filter 49306- ET-Red#1Fish with ET580/25x, T600/pxr, ET625/30 mounted in Meiji cube | |
| CHROMA FILTER SET # 49028 ET-DAPI FOR 395NM LIGHT SOURCES | |
| CHROMA FILTER SET # 49028 ET-DAPI FOR 395NM LIGHT SOURCES MOUNTED IN CUBE | |
| CHROMA FILTER SET # 49302 ET-AQUA FISH | |
| CHROMA FILTER SET # 49302 ET-AQUA FISH MOUNTED IN CUBE | |
| CHROMA FILTER SET # 49303 ET-GREEN # 1 FISH | |
| CHROMA FILTER SET # 49303 ET-GREEN # 1 FISH MOUNTED IN CUBE | |
| CHROMA FILTER SET # 49309 ET -ORANGE # 2 FISH | |
| CHROMA FILTER SET # 49309 ET -ORANGE # 2 FISH MOUNTED IN CUBE | |
| Empty filter cube for excitation filter set for MT6000 | |
| Graduated rotatable analyzer for ML9700 series | |
| | |
| (E.O.L./DISCONTINUED) Intermediate tube with sliding analyzer for MT9500. Replaced by MA1043 | |
| (Discontinued) Polarizer with full wave plate for MT9500-avail.as replacementpartonly | |
| | |
| Senarmont compensator for MT9200 & MT9300 | |
| Senarmont compensator for MT9900 Series | |
| | |
| Eyeshield for MA817 SWH 10X eyepiece (each) | |
| | |
| Milk-white acrylic stage 68mm diameter, for PKL stand | |
| Abbe condenser,N.A.1.25 with iris diaphragm in dove-tail mount | |
| Substage condenser w/iris diaphragm & dovetail mount (for MT7500,8500) | |
| Abbe condenser,N.A.1.25 w/iris diaphragm | |
| Abbe condenser,N.A.1.25 w/darkfield stop, w/iris diaphragm | |
| | |
| Achromatic condenser, N.A.1.25 with iris diaphragm in dove-tail mount | |
| Zernike phase condenser w/center- able phase annuli for 10X,20X,40X,100X | |
| Darkfield condenser, N.A. 1.25, dove-tail mount | |
| Polarizer set for MT4000,MT5000, MT6000 series microscopes | |
| Analyzer in mount for MA915 Polarizer set | |
| 43mm polarizing filter for use with MA1043(old part MA1048) | |
| Ceramic coated flat-top stage, 78mm x 52m, X-Y movement | |
| Ceramic coated flat-top stage, 78mm x 52mm,X-Y movement,incl.in MT4000 | |
| Ceramic coated flat-top stage,78mm x 52mm,X-Y movement | |
| Ceramic coated flat-top stage,78mm x 52mm,X-Y movement | |
| Ball bearing for MA918R, same as for MT4000/5000/6000 stages | |
| Graduation scale for X travel | |
| | |
| LWD Plan Epi objective 20X, N.A. 0.40, W.D. 11.0mm,F.N.24 | |
| LWD Plan Epi objective 50X, N.A. 0.55, W.D.7.5mm, F.N.24 | |
| (E.O.L./DISCONTINUED) Plan LWD E100X obj. infinity/0, N.A. 0.80, F.L. 2.0, W.D | |
| Plan Semi Apo Epi BD5X objective N.A.0.10, F.L.4O.O, W.D. 17.00 | |
| Plan Semi Apo Epi BD10X objective, N.A.0.25, F.L.20.0, W.D.7.48 | |
| Plan Semi Apo Epi BD20X objective N.A.0.40, F.L.10.0, W.D.5.20 | |
| Plan Epi objective BD50X, N.A.0.75, W.D.0.38mm, F.N.22 | |
| Vertical koehler illuminator,6V 30W halogen lamp, 100V~240V | |
| Transformer for MA927 in separate case (input 100V~240V,output 6V30W) | |
| LED transformer only in case for MA806/LED vertical koehler ill. | |
| Auto voltage sensing power supply for MA927/L provided in separate case | |
| (E.O.L./DISCONTINUED-2015)TRANSFORMER FOR MA955LED IN SEPARATE CASE 100V-240V | |
| Vertical koehler LED illuminator, auto voltage sensing, 100V-240V | |
| Vertical koehler illuminator, 12V 50W halogen lamp, 100V~240V | |
| tranformer for MA928 in separate case(input 100V~240V,output 12V50W) | |
| Auto voltage sensing power supply 4 MA928/L provided in separate case | |
| Vertical LED BF/DF/POL illuminator, auto voltage sensing, 100v-240V | |
| Spare fuse 0.5A for LED illuminator | |
| | |
| S.Plan Phase 10X objective, N.A. 0.25, W.D. 7.3mm | |
| S. Plan Phase 20X objective, N.A. 0.40, W.D. 9.1mm | |
| (E.O.L./DISCONTINUED) -(USE MA841) S. Plan Phase 40X objective, N.A. 0.65, W.D. 0.72mm | |
| (E.O.L./DISCONTINUED) (USE MA842) S. Plan Phase 100X obj., N.A. 1.25 oil W.D. 0.14mm | |
| Strain Free Plan Semi Apo Pol objective 4X, N.A.0.10,W.D. 25.89mm | |
| Strain Free Plan Semi Apo Pol objective 10X, N.A.0.25,.D.7.3mm | |
| Strain free plan obj.10X,N.A.0.25, W.D.10.6mm,dispersion staining, Infinity Corrected F=200mm | |
| Dispersion Staining 10X objective, central stop type, Infinity Corrected F=200mm | |
| Strain Free Plan Semi Apo Pol objective 20X, N.A.0.40,W.D.7.29mm | |
| Strain Free Plan obj. 20X/N.A.0.40, W.D. 5.0mm,dispersion staining | |
| Strain Free Plan Semi Apo Pol objective 40XS,N.A.0.65, W.D.0.72mm | |
| Strain Free Plan obj.40XS/N.A.0.65, W.D.0.72mm, dispersion staining | |
| Strain Free Plan Semi Apo Pol objective 60XS, N.A.0.85, W.D.0.2mm | |
| Strain Free Plan Semi Apo Pol obj. 100XS, N.A.1.25 oil,W.D.0.14mm | |
| Ceramic coated flat-top stage, 191mm x 126mm | |
| Roller Bearing for MA941 stage | |
| Rail required two for right side for X and Y axis | |
| For X Axis, Rail required two for right side ( Also needed is MA941/PT#104 and MA941/PT#105 to complete the set | |
| Rail bearing guide right side and also used on right side for the Z axis and the back side for the Y axis | |
| Rail roller bearing right side, for the X & Y axis -8 roller bearing pieces | |
| Ceramic coated flat-top stage,clear glass stage plate, 191mm x 126mm | |
| Attachable mechanical stage for MT9000 series with point counter | |
| Point Counter Mechanical Stage for Olympus microscopes | |
| Point Counter Mechanical Stage for Nikon microscopes | |
| Detent Clip with ball for MA945 ( Requires qty # 2 MA945/PT#2) | |
| Screw for MA945/PT#1 ( Requires qty #2 for MA945/PT#1) | |
| | |
| Strain Free Plan objective 20X, N.A.0.40, W.D.5.2mm | |
| Strain Free Plan objective 40XS, N.A.0.65, W.D.0.81mm | |
| Binocular head-Siedentopf type, inclined at 30 degrees | |
| (E.O.L./DISCONTINUED) Binocular head-siedentopf type, inclined at 30 degrees(incl.in U91) | |
| Trinocular head-Siedentopf type, inclined at 30 degrees | |
| (E.O.L./DISCONTINUED) Trinocular head-siedentopf type, inclined at 30 degrees(incl.in U92) | |
| Trinocular head inclined at 30 degree, minus siedentof for MT9000 and MT9900 | |
| Strain Free Abbe condenser,N.A.1.25 w/iris diaphragm in dove tailmount | |
| Strain free Abbe condenser N.A.1.25, | |
| Vertical illuminator attachment, 6V 30W halogen koehler | |
| VERTICAL KOEHLER ILLUMINATOR LED INCLUDED IN MT9420L & MT9430L | |
| Rotatable analyzer with 180 degree graduations (34m x 6mm x 156mm) | |
| Rotatable analyzer w/180 degree graduations | |
| Set screw with plastic tip for MA956 and MA956/05 rototable analyzer | |
| Ergonomic tilting bino.head,adjust- able vertically from 10-50 degrees | |
| Ergonomic bino. head, inclination adjustable from 10-50 degrees | |
| Ergonomic head minus siedentopf head (MA816/05/PT#A) | |
| Ergonomic tilting binocular head- adj.vertically from 10-50 degrees | |
| Ergonomic binocular head,inclination adjustment from 10-50 degrees | |
| Ergonomic binouclar head erect image inclination adjustable vertically from 10 deg. to 50 deg. (with depolarizer) | |
| Ergonomic tilting bino.head,adjust- able vertically from 10-50 degrees in Black Color | |
| Photo/video attachment with sliding 80/20 beam-splitter | |
| Polarizing filter,19.5mm dia.filter in metal mount,fit 30mm filterslot | |
| Quadrant LED lighting ring illuminator with AC | |
| (E.O.L/ DISCONTINUED)- Wood storage cabinet | |
| | |
| LED ring illuminator with auto voltage sensing transformer | |
| LED RING LIGHT WITH CORD ONLY FOR MA964 (60 LED BULB ARRAY) | |
| | |
| Transformer only for MA964 without AC cord | |
| | |
| DO NOT USE.. use MA960 INSTEAD | |
| (DISCONTINUED) LED ring illuminator 1st edition | |
| Plan objective 4X, N.A.0.10, W.D. 15.9mm, F.N.20 | |
| Plan objective 10X, N.A.0.25, W.D. 7.3mm, F.N.20 | |
| (E.O.L./DISCONTINUED) ( Use MA833) Plan objective 20X, N.A.0.40, W.D.5.1mm | |
| Plan objective 40X, N.A.0.65,W.D. 0.55mm, F.N.20 | |
| Plan objective 60X for MT4000, MT5000 series | |
| Plan objective 100X, N.A.1.25 oil, W.D.0.14mm, F.N.20 | |
| Centering target for mercury bulb alignment | |
| Abbe condenser with swing-out top lens, 0.90 N.A. | |
| Strain free Abbe condenser w/swing out top lens,N.A.0.90w/iris disphr. | |
| Eye level riser for MT series stands | |
| Rotatable 1/4 wave plate for EMZ body | |
| Trino.head-siedentoopf type, erect image w/sliding 0/100 beamsplitter | |
| Plan Apo objective F10X, N.A.0.30, W.D. 8.6mm, F.N. 24 | |
| Plan Apo objective F20X, N.A.0.65, W.D. 0.7mm, F.N.24 | |
| Plan Apo objective F40X, N.A.0.80, W.D. 0.2mm, F.N. 24 | |
| Plan Apo objective F100X oil, N.A.1.25, W.D. 0.2mm, F.N. 24 | |
| B.D. single nosepiece for 26mm thread objectives | |
| | |
| B.D.quintuple nosepiece for MT7500,MT8500 & MC3050 series | |
| | |
| Combination 1st order red compen- sating plate,1/4 wave length plate t | |
| Plan Semi Apo Epi BD100X obj. N.A.0.90, F.L.2.0, W.D.0.50 | |
| Adapter (riser) to mount MA564, 564/05,565,565/05 on PKL,PLS stands | |
| Nosepiece plug for 26mm thread BF/DF objectives | |
| Vertical koehler ill.w/sliding rotatable polarizer for FU3050 and FU3054 | |
| Strain free Plan Semi Apo Pol obj. 50XS,N.A.0.55, W.D.5.00mm (optinal) | |
| Plan Semi Apo Epi BD50X LWD obj. N.A.0.50, F.L.4.0, W.D.5.00 | |
| Adapter to connect prior metal arc lamp to Meiji MT6000 | |
| (E.O.L./DISCONTINUED) Sextupe nosepiece for U50 Series | |
| NeoLED replacement unit for MT-30 models | |
| Universal boom stand without mounting post | |
| MAC-10 stand with MAC-10/BASE, MAC-11/PT#1, OS-QRSC/1.5 | |
| Base for MAC-10 11x13x0.5" | |
| MAC-11 stand (base, post, mount bracket, quick release clamp) | |
| Base for MAC-11 (12" deep x 14" wide x 1" thick) | |
| Post and mounting bracket | |
| Mounting bracket only for MC40/50 w/clamp screw fits 38mm pole | |
| 16" x 1.5 diam. stainless steel vert.post MAC-11(1/13 x 1" socket) | |
| | |
| (E.O.L./DISCONTINUED)amp house for use with 12V/100W halogen lamp (incl.in 100W models) | |
| Lamp house for use with 12V/50W halogen lamp (incl. in 50W models) | |
| | |
| Black round Mounting flange which fits a 29mm vertical pole out of all S-4000 stands and MU and UL vertical posts (MTT# UL/PT#8) | |
| Magnetic bench stand w/mirror base and w/darkfield capability | |
| Include head mount, clamp screw and guide pin for nosepiece | |
| Intermediate tube with BD diaphragm | |
| | |
| Custom lens with threaded housing | |
| Conversion lens without mount | |
| McCrone Asbestos Reference Set | |
| Coupler 52mm Step Down Ring | |
| Coupler 46mm Step Down Ring | |
| Coupler 50mm Step Down Ring | |
| Coupler 55mm Step Down Ring | |
| Coupler 58mm Step Down Ring | |
| MEIJI TECHNO White 6FT LONG , 27" High Table cover with Meiji Techno Logo print in the front and Meiji Techno Man with Microscope print on both sides, back is open back. | |
| MEIJI TECHNO White 6FT LONG , 27" High Table cover with Meiji Techno Logo print in the front with Microscope ../dealer/images on the left and right side of the logo and Meiji Techno Man with Microscope print on both sides, back is open back. | |
MEIJI/80"/RETRACTABLE BANNER 1 | MEIJI TECHNO 80" high, 30"wide retractable stand up banner with case: MODULAR FLEXIBILITY, SUPERB OPTICS, RUGGED DEPENDABILITY, ERGONOMIC DESIGN, LIMITED LIFETIME WARRANTY, MADE IN JAPANDEPENDABILITY, ERGONOMIC DESIGN, LIMITED LIFETIME WARRANTY, MADE I... | |
MEIJI/80"/RETRACTABLE BANNER 2 | MEIJI TECHNO 80" high, 30"wide retractable stand up banner with case:THE BEST STEREO MICROSCOPES FROM JAPAN, EMZ ZOOM,EMT, EMF, EM SERIES, CRISP HIGH RESOLUTION,PRECISION PARFOCALLED OPTICS, 10+EYEPIECE VARIETY, 25+AUXILLIARY LENSES,40+STAND OPTIONS,CA... | |
MEIJI/80"/RETRACTABLE BANNER 3 | MEIJI TECHNO 80" high, 30"wide retractable stand up banner with case:COMPOUND MICROSCOPES FOR EVERY APPLICATIONS BIOLOGICAL,METALLURGICAL MEASURING, POLARIZING, ASBESTOS | |
| LED Light source with special adapter to fit MT6000 Series from 20 different LED wavelengths, ranging from the near-UV at 365nm to the near-IR at 770nm. The system comprises a pE-100 LED Light Source, control pod, and power supply. | |
| LED Light source with special adapter to fit TC5500/TC5600 Series from 20 different LED wavelengths, ranging from the near-UV at 365nm to the near-IR at 770nm. The system comprises a pE-100 LED Light Source, control pod, and power supply | |
| (White Model) LED Light source with special adapter to fit MT6000 Series from 20 different LED wavelengths, ranging from the near-UV at 365nm to the near-IR at 770nm. The system comprises a PE-100 (White) LED Light Source, control pod, and power supply. | |
| (White Model) LED Light source with special adapter to fit TC5500/TC5600 Series from 20 different LED wavelengths, ranging from the near-UV at 365nm to the near-IR at 770nm. The system comprises a pE-100 LED Light Source, control pod, and power supply | |
| LED Light source with special adapter to fit MT6000 Series from 20 different LED wavelengths, ranging from the near-UV at 365nm to the near-IR at 770nm. The system comprises a PE-2 LED Light Source, control pod, and power supply | |
| | |
| LED Light source with special adapter to fit MT6000 Series from 20 different LED wavelengths, ranging from the near-UV at 365nm to the near-IR at 770nm. The system comprises a PE-300 LED Light Source, control pod, and power supply... | |
| | |
| LED Light source with special adapter to fit MT6000 Series from 20 different LED wavelengths, ranging from the near-UV at 365nm to the near-IR at 770nm. The system comprises a PE-4000 LED Light Source, control pod, and power supply. | |
| | |
| 2MP CMOS Tablet camera, 1GB RAM, Dual core 1.5Ghz | |
| | |
| Diamond loupe 10x triplet egg-shaped | |
| (DISCONTINUED) (STILL IN STOCK) Diamond loupe, hexagonal type. | |
| Diamond loupe 10X triplet egg-shaped chrome plated | |
| | |
| Galilean Loupes 2.5x, 11"-15" Focal | |
| Galilean Loupes 2.5x, 8"-12" Focal | |
| Galilean Loupes 3.0x, 11"-15" Focal | |
| Galilean Loupes 3.5x, 11"-15" Focal | |
| Galilean Loupes 3.5x, 14"-18" Focal | |
| Round 2x Magnifier with 43” reach, 5”with table edge clamp, Black finish | |
| Round 2x Magnifier with 43” reach, 5”with table edge clamp, Spectre Blue finish | |
| Round 2x Magnifier with 43” reach, 5”with table edge clamp, Red finish | |
| Round 2x Magnifier 5” with 43” reach, with table edge clamp, Silver finish | |
| Rectangular 2x Magnifier 7” x 5 ¼”with 43” reach, with table edge clamp, Black finish | |
| Rectangular 2x Magnifier 7” x 5 ¼”with 43” reach, with table edge clamp,Blue finish | |
| Rectangular 2x Magnifier 7” x 5 ¼”with 43” reach, with table edge clamp,Red finish | |
| Rectangular 2x Magnifier with 43” reach, 7” x 5 ¼”with table edge clamp, Silver finish | |
| MH-FLi metal halide illuminator; Liquid light guide, 1.5m ;GFP/FITC focusing lens. Excitation filter 480nm/ 40 (460-500nm); TRITC RFP focusing lens. Excitation Filter: 545 nm/ 30 ( 530-560nm); Lens Holder; Positioner; Dual Bandpass filter, 500-535 nm a... | |
| | |
| PAXcam2 2MP CMOS Digital Camera System:..Includes USB2 digital camera (1600 x 1200), PAX-it Image Management software, PAXcam custom interface, USB2 cable. C-mount coupler not included (0.5x c-mount coupler recommended for best performance). PAX-it sof... | |
| Universal PAXcam C-Mount Adapter, 0.5x, 0.5x Cmount..lens, will provide maximum field-of-view on..monitor for ½” format camera without vignetting,..focus adjustment insures parfocality with binocular..head, includes J-CLAMP for mounting to Meiji..Trino... | |
| Portable Stereo Operation Microscope with Table Clamp and NVI illumination | |
| Portable Stereo Operation Microscope Stand with H Style stand with wheels.... | |
| Stand H style with 4 wheels for MJ9100 Portable Microscope | |
| Right hand slide holder assembly (new part# ML/PT#008R) | |
| | |
| Replacement mirror in base illuminator | |
| | |
| Right hand finger assembly (old part# ML/PT#0008R, MTT# ML/PT#009) | |
| Left hand finger assembly | |
| | |
| | |
| | |
| | |
| (E.O.L./DISCONTINUED)Use ML2200-Binocular microscope S.flat 4X,10X,S40X & S100X,110V | |
| Complete ML gear assembly for ML2000/ML5000 series. | |
| (E.O.L./DISCONTINUED)Use ML2200/220-Binocular microscope 220V S.flat 4X,10X,S40X & S100X | |
| | |
| Lamphouse housing with lens- threaded on top of the base | |
| | |
| Coaxial focus block assembly | |
| | |
| Condenser carier w/set screws | |
| Complete Base only for ML2000 110V, with new transformer, new lampsocket, new rheostat | |
| | |
| Screw for base plate cover | |
| Dimmer switch- Square shape (old part# ML2000/PT#8)( Same as PBH/PT#77) | |
| | |
| Lamp socket (old part# ML2000/PT#5) | |
| Set screw knurled for back lamp cover ( usually has 2 screws in back) | |
| | |
| Screw for rubber foot (each) | |
| | |
| ML2000 condenser assembly | |
| | |
| Fine focus knob (left hand) | |
| Coarse focus knob (left hand) | |
| | |
| Worm gear for focus assembly on ML2000, VT, FU1000 | |
| Coarse focus knob (right hand) | |
| | |
| Fine focus knob (right hand) | |
| | |
| Lamp socket (new part# ML2000/PT#237) | |
| | |
| Screw for centering condenser | |
| | |
| Mirror for keohler illuminator | |
| | |
| Electronic transformer 220V | |
| Dimmer switch 5 Lead style, round shape (Replaced by new part# ML2000/PT#229) | |
| Set screw for focusing handle | |
| Base only for ML2000 220V | |
| (E.O.L./DISCONTINUED)Use ML 2300 Trinocular microscope S.flat 4X,10X,S40X & S100X, 110V | |
| (E.O.L./DISCONTINUED) Use ML2300/220-Trinocular microscope (220V, 50HZ) S.flat 4X,10X,S40X & S100X obj. | |
| Binocular microscope SM Plan 4X,10X,S40X & S100X | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |