Meiji Techno Focusing Holders and Focusing Blocks

Meiji Techno Focusing Holders

Focusing holders hold the microscope body and contain the mechanism that raises or lowers the body to focus on the specimen. Complete stands include their own focusing holders. But for other kinds of tasks, however, it may be necessary to mount the microscope body on a boom arm stand or directly onto a machine or some other surface. The focusing holders below offer a range of options for such applications.

F HOLDER

Focusing holder with rack and pinion mount that allows smooth, precise focusing over 55mm of travel. Coarse focus mechanism incorporates a slip clutch and tension adjustment. Fits 20mm diameter, 71mm long mounting post. The 84.2mm diameter opening accepts all EM Series stereo bodies.

F holder

FX HOLDER
Focus holder with integral, adjustable illuminator port. Rack and pinion mount allows smooth, precise focusing over 55mm of travel. Coarse focus mechanism incorporates a slip clutch and tension adjustment. Fits 20mm diameter, 71mm long mounting post. The 84.2mm diameter opening accepts all EM Series stereo bodies.

FX holder

FS HOLDER
Tilting focus holder with integral, adjustable illuminator port. Rack and pinion mount allows smooth, precise focusing over 55mm of travel. Coarse focus mechanism incorporates a slip clutch and tension adjustment.

Uses 15.8mm (5/8") diameter, 34.5mm long mounting pin. The 84.2mm diameter opening accepts all EM Series stereo bodies.

FC HOLDER

Focus holder with coaxial coarse and fine focus for high magnification applications where precise fine focus adjustment is required. Rack and pinion mount allows smooth, precise focusing over 33mm of travel.

Coarse and fine focus mechanism incorporates a slip clutch and tension adjustment. Fits 20mm diameter, 82mm long mounting post (FC11 adapter is required for mounting to the 71mm long posts on our S-4100, S-4200, and S-4500 stands). The 84.2mm diameter opening accepts all EM Series stereo bodies.

FC holder

FC11 MOUNTING PIN EXTENSION

The FC11 is required when mounting the FC Focus block on the 71mm length mounting pin of the S-4000 series stands.

fc11 mounting pin extension

FSC FOCUSING BLOCK

The FSC is an inclinable coarse and fine adjusting focus block with 5/8" diameter mounting pin to hold the stereo microscope body onto any machine or other special applications. The 84.2mm diameter opening accepts all EM Series stereo bodies.

FSC holder

FK FOCUSING BLOCK
The FK has a deeper throat depth (164.6mm) than the remainder of Meiji focus blocks which are 136.8mm.

This coarse adjusting focus block can be mounted in either direction and holds any Meiji stereo microscope body onto a machine or for other special OEM applications. The 84.2mm diameter opening accepts all EM Series stereo bodies.

FK holder

FCD FOCUSING BLOCK

The Model FCD has a fine focus knob as well as coarse. This coarse/fine adjusting focus block can be mounted in either vertical position.

As long as the camera to be mounted accepts a 1/4"-20 bolt like most video, 35mm and digital cameras, this focus block can be used for many custom or OEM applications.

Resolution: One revolution of the fine focus knob raises or lowers the focus block 0.2 mm.

FCD holder

FD FOCUSING BLOCK

The Model FD has only a course focus knob which is fine for most video or microscopy applications This coarse adjusting focus block can be mounted in either vertical position.

As long as the camera to be mounted accepts a 1/4"-20 bolt like most video, 35mm and digital cameras, this focus block can be used for many custom or OEM applications.

FD focusing block

<-- BACK