Packing the MT
Series Microscope
|
|
Ensure
that the stage is securely wrapped. |
||
|
Place the
large bag over the entire scope. |
||
|
Screw the
objectives onto their canister caps.
|
||
|
Screw the
objectives into their canisters. |
||
|
Place the
objectives into the cardboard holes in
their box.
|
||
|
Fold and
place the dust cover into the box with
objectives. |
||
|
Wrap the
Siedentopf head in its plastic bag and
place it in the side compartment.
|
||
|
Secure the
power cord in the rectangular cardboard
enclosure.
|
||
|
The
rectangular cardboard enclosure should
fit snugly into the box above the
objective canisters.
|
||
|
Wrap the
trinocular attachment and place it into
the box with the cutout shaped for it.
|
||
|
Place
the microscope body into the large box and put
the cardboard layer with a cutout in to
hold it in place.
Put the one
of the smaller boxes in on top of the
cardboard layer.
|
||
|
Place the
other box in next to previous one.
|
||
|
The two
boxes should fit snugly with no room for
movement.
|
||
|
Close and
tape shut the
inner shell.
|
||
|
Close and
securely tape the
outer shell.
|
||
About Us |
Contact Us | Choosing a Microscope |
Accessories |
Literature |
Service | Warranty
|