MT-B200/GFP/FITC – Digital Brightfield and Fluorescent Microscope Imaging System with Integrated Digital Camera

The MT-B200/GFP/FITC Digital Imaging Microscope System is Meiji Techno’s new Digital Brightfield and Fluorescence microscope system

Easy installation: No Alignment, No Calibration and Minimal Assembly 

Slide capacity : One slide

Fixed objective : 4X, 10X, 20X, 40X (Replaceable)

Focusing : Front Manual Control

Camera: On Board built in USB 3.0, 1.3MP CMOS Digital Camera

Software:  Basler Pylon Software which can be easily downloaded.  It connects easily to any PC or laptop with a USB 3.0 connection. 

Size: Compact footprint design ( 160 mm (W) x 270 mm (D) x 230 mm (H) )

Turret: Replaceable fixed one objective turret with a front focus control to easily bring a slide into focus.  Illumination: A 3W integrated LED illumination with an auto voltage sensing power supply ( AC100V to 240V, 50Hz/ 60Hz.) 

FLUORESCENCE FILTER (Included): 

MA879/05: Basic Blue CHROMA (19002) filter- AT-GFP/FITC Longpass mounted in Meiji Filter cube: Exciter (EX) : AT480/30x, Dichroic (BS): AT505DC, Emitter (EM): AT515lp

Chroma’s 19002 AT-GFP/FITC longpass filter set is similar to the 39002 Series AT Sputtered single band filter set but use longpass emission filter with a cut-on wavelength at 515nm instead of a bandpass emission filter.

Features
?  Filters include in this set: AT480/30x (EX), AT505DC (BS), AT515lp (EM)

?  Round excitation and emission filters mounted in anodized aluminum rings 2.3-5.0mm thick, up to 25mm in diameter

?  Rectangular dichroics up to 26x38mm, 1mm thick, to fit standard microscope manufacturer filter cubes

Benefits
?  19002 AT-GFP/FITC longpass filter set is best with these fluorochromes: Acridine Orange + DNA and RNA, Auramine-rhodamine, JC-1 non-ratiometric

https://www.chroma.com/products/sets/19002-at-gfp-fitc-longpass#tabs-detail_page_plot-left-1

OPTIONAL MECHANICAL STAGE (Recommended)

MA1085: Attachable mechanical Stage, movement 60mm (X) x 30mm (Y) with Left hand drop-down X-Y slide controls for the Meiji Techno Digital models: MT-B100, MT-B200, MT-B300 models

OPTIONAL OBJECTIVES:

Application: This Digital microscope is designed for laboratories that do routine volume slide scanning with particular objective and want to digitize every slide seen for documentation for the patient digital file.  It also saves the laboratory or hospital valuable time from sending their slides to third parties inspection labs, which often times are lost or the quality of the slide degrades from temperature or shipping mishaps.  Ultimately saving the pathologist or lab technician time in their diagnosis.  

The MT-B200 Digital Microscope is Meiji Techno’s new Digital Brightfield and Fluorescence microscope system

Easy installation: No Alignment, No Calibration and Minimal Assembly 

Camera: On Board built in USB 3.0, 1.3MP CMOS Digital Camera

Software:  Basler Pylon Software which can be easily downloaded.  It connects easily to any PC or laptop with a USB 3.0 connection. 

Size: Compact footprint design (160 mm (W) x 270 mm (D) x 230 mm (H))

Turret: Replaceable fixed one objective turret with a front focus control to easily bring a slide into focus.  Illumination: A 3W integrated LED illumination with an auto voltage sensing power supply (AC100V to 240V, 50Hz/ 60Hz.) 

Application: This Digital microscope is designed for laboratories that do routine volume slide scanning with particular objective and want to digitize every slide seen for documentation for the patient digital file.  It also saves the laboratory or hospital valuable time from sending their slides to third parties inspection labs, which often times are lost or the quality of the slide degrades from temperature or shipping mishaps.  Ultimately saving the pathologist or lab technician time in their diagnosis. 

The MT-B Digital Microscope Series is Meiji Techno’s new Digital Brightfield/ Phase Contrast/ Fluorescence microscope systems.

MT-B100 - Brightfield/Phase Contrast
MT-B200 - Brightfield/Fluorescence
MT-B300 - Brightfield/ Phase Contrast/ Fluorescence

Easy installation: No Alignment, No Calibration and Minimal Assembly 

Camera: On Board built in USB 3.0, 1.3MP CMOS Digital Camera

Software:  Basler Pylon Software which can be easily downloaded.  It connects easily to any PC or laptop with a USB 3.0 connection. 

Size: Compact footprint design (160 mm (W) x 270 mm (D) x 230 mm (H) )

Turret: Replaceable fixed one objective turret with a front focus control to easily bring a slide into focus.  Illumination: A 3W integrated LED illumination with an auto voltage sensing power supply ( AC100V to 240V, 50Hz/ 60Hz.) 

COMPONENTS AND ACCESSORIES OF MT-B SERIES

• MA1085: Attachable mechanical stage with 60mm (X) x 30mm (Y) with left hand drop down X– Y slide controls for Meiji Techno Models: MT-B100, MT-B200, MT-B300 models. (Attaches easily on left side of)

FLUORESCENCE OBJECTIVES 
• MA850: TC Planachromat F10X objective ∞/1.0 N.A. 0.30, F.L. 20.0, W.D. 7.50 
• MA851: TC Planachromat F20X objective ∞/1.0 N.A. 0.40, F.L. 10.0, W.D. 7.50 
• MA852: TC Planachromat F40X objective ∞/1.0 N.A. 0.60, F.L. 5.00, W.D. 2.90

PHASE OBJECTIVES 
•  MA826: TC LWD Planachromat Phase 10X objective ∞/1.0 N.A. 0.25, F.L. 20.0, W.D. 7.60 
•  MA827: TC LWD Planachromat Phase 20X objective ∞/1.0 N.A. 0.40, F.L. 10.0, W.D. 7.00 
•  MA828: TC LWD Planachromat Phase 40X objective ∞/1.0 N.A. 0.65, F.L. 5.00, W.D. 2.80

PHASE ACCESSORIES
• MA1104: Phase slider for Top insert slot for MT-B100 and MT-B300 models 

DUST COVER
•  MA703: Dust cover for EM stereos