MT5300EL-HD LED 40X-1000X Advanced Biological Compound Ergonomic Binocular Brightfield with Infinity Corrected 4X, 10X, 40X , 100X with HD1000-LITE-M Camera Monitor

This configuration consists of Meiji Techno's Upright Brightfield Biological Ergonomic LED Compound System called the MT5300EL and a HD Camera Monitor called the HD1000-LITE-M.

The MT5300EL Series is Meiji Techno America’s Research Grade upright Ergonomic Trinocular Biological Compound LED Microscope system. Equipped with an Ergonomic Tilting Trinocular head-Adjustable vertically from 10° to 50° degrees, Siedentopf type .I.P. adjustment 53mm to 75mm, graduated diopter on left eyetube ( 30.0mm I.D. eyetube) enables a wider adjustment range of eyepoint height, which enables different torso sizes to observe in a relax ergonomic posture. Meiji Techno's laboratory grade upright microscope line is the new and cost-effective MT5300EL Series Biological Microscopes. The MT5300EL Series employs all new and improved U. Plan optics. Meiji Techno's ICOS™ (Infinity Corrected Optical System) makes the study of mounted specimens fast and easy while delivering an excellent cost-to-performance ratio. Ergonomically designed, precisely manufactured in Japan and simple to use stage and coarse and fine controls, to meet the demands of researchers and clinical laboratory specialists. Meiji Techno has reviewed all aspects of microscope usability to develop the MT5300EL microscope, which provides functionality with operational ease. It has a larger 30.0 mm I.D. eyetube and a larger stage and higher quality objectives than the MT4000 Series. Viewing high quality images, sample changing and photomicroscopy are all conducted with ergonomics in mind. High Intensity LED illumination shows true to life color quality. The MT5300EH is designed for Brightfield observation and rugged quality as you would expect from a Japanese made microscope. Various imaging techniques are available with different models in this series.


The HD1000-LITE-M is Meiji Techno America’s affordable HDMI /USB2.0 camera technology! It is the most economical HDMI & USB 2.0 camera in the market. You can easily operate the HD1000-LITE-M camera by directly connecting it to a monitor with a HDMI port without a PC. It can directly save images into an on-board SD-4G card on the camera or connect the camera directly to your PC as it has a standard USB 2.0 interface to utilize the full annotation/software function. The camera quickly reacts to lighting changes in any life science, clinical or material applications. With video output via HDMI connector, the setting menu allows easy access to feature settings.

NOTE for HD1000-LITE-M: 
• 5MP Still Capture resolution 2592 x 1944
• 1920 x 1080- 15fps (frame per second) /1080P HDMI via HDMI 
• 1920 x 1080 -15fps/1080p by USB 2.0) via USB 2.0 


made in japan


Locate a DealerGet a Quote


cerohs

MODEL DESCRIPTION
MT5200L Brightfield Binocular Biological microscope, Siedentopf head inclined at 30° degrees, Infinity Corrected (I.C.O.S.) U. Plan objectives 4X, U. Plan 10X, U. Plan 40X & U. Plan 100X oil, SWH10X FN22 eyepieces, ceramic coated flat top stage with stage holder, Abbe condenser NA 1.25, LED illuminator.
MT5200EL Brightfield Ergonomic Binocular Biological microscope, Siedentopf head tilts from 10°-50° degrees, Infinity Corrected (I.C.O.S.) objectives U.Plan 4X, U.Plan 10X, U.Plan 40X & U.Plan 100X oil, SWH10X FN22 eyepieces, ceramic coated flat top stage with stage holder, Abbe condenser NA 1.25, LED illuminator.
MT5300L Brightfield Trinocular Biological microscope, Siedentopf head inclined at 30° degrees, 25MM O.D., 23MM I.D. phototube, Infinity Corrected (I.C.O.S.) objectives U.Plan 4X, U.Plan 10X, U.Plan 40X & U.Plan 100X oil, SWH10X FN22 eyepieces, ceramic coated flat top stage with stage holder, Abbe condenser NA 1.25, LED illuminator.
MT5300EL Brightfield Trinocular Biological microscope, Siedentopf head tilts from 10°-50° degrees, 25MM O.D., 23MM I.D. phototube, Infinity Corrected (I.C.O.S.) objectives U. Plan 4X, U.Plan 10X, U.Plan 40X & U.Plan 100X oil, SWH10X FN22 eyepieces, ceramic coated flat top stage with stage holder, Abbe condenser NA 1.25, LED illuminator.
MT5200H Brightfield Binocular Biological microscope, Siedentopf head tilts from 10°-50° degrees, Infinity Corrected (I.C.O.S.) objectives U. Plan 4X, U. Plan 10X, U. Plan 40X & U. Plan 100X oil, SWH10X FN22 eyepieces, ceramic coated flat top stage with stage holder, Abbe condenser NA 1.25,Halogen 6V 30 W illuminator.
MT5200EH Brightfield Ergonomic Binocular Biological microscope, Siedentopf head tilts from 10°-50° degrees, Infinity Corrected (I.C.O.S.) objectives U.Plan 4X, U.Plan 10X, U.Plan 40X & U.Plan 100X oil, SWH10X FN22 eyepieces, ceramic coated flat top stage with stage holder, Abbe condenser NA 1.25,Halogen 6V 30 W illuminator.
MT5300H Brightfield Trinocular Biological microscope, Siedentopf head inclined at 30° degrees, 25MM O.D., 23MM I.D. phototube, Infinity Corrected (I.C.O.S.) objectives U. Plan objectives 4X, U. Plan 10X, U. Plan40X & U. Plan 100X oil, SWH10X FN22 eyepieces, ceramic coated flat top stage with stage holder, Abbe condenser NA 1.25, Halogen, 6V 30W illuminator.
MT5300EH Brightfield Trinocular Biological microscope, Siedentopf head tilts from 10°-50° degrees., 23MM I.D. phototube, Infinity Corrected (I.C.O.S.) objectives, U. Plan 4X, U.Plan 10X, U.Plan 40X & U.Plan 100X oil, SWH10X FN22 eyepieces, ceramic coated flat top stage with stage holder, Abbe condenser NA 1.25, Halogen, 6V 30W illuminator


Key:

B   Product Highlighted
X   LED Bulbs
B   Halogen Bulbs


Ergonomic Trinocular Brightfield Biological LED Laboratory Series is one of our most rugged fully equipped microscope systems from Japan that is able to accommodate different user heights with its proprietary Ergonomic Tilting Trinocular head-Adjustable vertically from 10° to 50° degrees, which meets the demands of researchers and clinical laboratory specialists with different torso sizes. The Series microscopes feature a new computer engineered rigid frame that incorporates low positioned coaxial coarse/fine focus controls and ergonomic stage design for maximum efficiency and comfort while providing and extremely stable platform. The cast aluminum alloy metal stand has a chemical resistant finish and is the most rugged, durable finish in the market today. Equipped tension adjustment controls and a built in stage stop lever to protect the specimen and objectives from accidental damage during use. The MT5300EL Trinocular Series offers an outstanding range of features and optical performance with an emphasis on all newly engineered high performance U. Plan optics based on Meiji Techno’s ICOS™ Optical System (Infinity Corrected Optical System F=200mm) The new optics, provide exceptionally bright, crisp images with good color rendition and superior flat fields of view.

A modular design facilitates attachment of a variety of accessories such as CMOS/CCD HDMI video cameras , and all types of 35mm Digital SLR Cameras in the market today can be attached easily with the proper adapter set. The MT5300EL Ergonomic Series Microscopes offer crisp, distortion free, high resolution images in multiple modes of operation, Contrast methods available include: Brightfield and Phase Contrast. The MT5300EL Biological Microscope is a versatile brightfield and modular system designed to accept a wide variety of optional accessories and is backed by Meiji Techno’s Limited Lifetime Warranty.

Includes: 
   • MT5300EL: Ergonomic Trinocular Brightfield Compound microscope with Bright LED illumination with quintuple nosepiece and auto voltage sensing power supply
   • HD1000-LITE-M: The HD1000-LITE is a HDMI /USB2.0 camera technology from Meiji Techno! It is the most economical HDMI & USB 2.0 camera in the market. You can easily operate the HD1000-LITE camera by directly connecting it to a monitor with a HDMI port without a PC and directly save images into an on-board SD-4G card on the camera, or connect the camera directly to your PC as it has a standard USB 2.0 interface to utilize the full annotation/software function
   • MA151/35/03: C-mount adapter with 0.3X lens

MICROSCOPE HEAD - Siedentopf Binocular tube Accomodates Simple Eyepoint Adjustment 
   • MA975: Ergonomic Tilting Binocular head-Adjustable vertically from 10° to 50° degrees, Siedentopf type .I.P. adjustment 53mm to 75mm, graduated diopter on left eyetube ( 30.0mm I.D. eyetube) enables a wider adjustment range of eyepoint height, which enables different torso sizes to observe in a relax ergonomic posture.  Scale diopter adjustment for easy diopter adjustment.  This adjustment adapts to the user to make quick and accurate adjustments to match the interpupillary distance and diopter adjustment (Included in & MT5300EL)
   • MA958: Photo/video attachment with sliding 80/20 beam-spliter, for use with video or digital cameras when MA957 ergonomic head is used (Included in & MT5300EL)

head

MICROSCOPE EYEPIECES - COMPENSATING EYEPIECE, 30.00 MM WIDTH
   • MA817 (x 2): SWH10X high eyepoint eyepiece, Field No. 22, Tube O.D. 30.0MM (each), Anti-fungus coating to prevent fungi and mold when used in humid, hot environments. Improving greater durability and maximum optical quality

eyepieces

 MICROSCOPE OBJECTIVES - INFINITY CORRECTED OPTICAL SYSTEM, F=200MM
   • MA906 (x 2): Rubber Eyeshield for MA817, SWH10X eyepiece (each)
   • MA831: U. Plan Objective 4X, N.A 0.10, W.D. 25.8mm, F.N. 24
   • MA832: U. Plan Objective 10X, N.A. 0.25, W.D. 10.7mm, F.N. 24
   • MA834: U. Plan Objective 40X, N.A. 0.65, W.D. 0.5mm, F.N. 24
   • MA837: U. Plan Objective 100X oil, N.A. 1.25, W.D. 0.23mm, F.N. 24

objectives1 objectives2

MICROSCOPE CONDENSER - CENTRABLE ABBE CONDENSER WITH A HIGH N.A. AND BUILT IN IRIS DIAPHRAGM WITH A DOVE-TAIL MOUNT AND LOCKING SCREW.
   • MA910: Abbe condenser, N.A. 1.25 with iris diaphragm and dove-tail mount

 CONDENSER

MICROSCOPE FILTER INCLUDED- BLUE FILTER HELPS DIFFUSE HALOGEN FILAMENT
   • MA856/05: LB100 Blue Clear Filter 44.0mm diameter, unmounted 

MICROSCOPE STAGE - BUILT IN CERAMIC STAGE FOR SMOOTH SLIDE REPLACEMENT 
   • MA918R: Ceramic coated flat-top stage, 170mm x 140mm, 80mm x 52mm 

stage

MICROSCOPE FOCUSING ADJUSTMENT-WITH TENSION ADJUSTMENT CONTROL
   • Focusing Adjustment: Japanese Precision coaxial coarse and fine focusing controls with graduation reading 2 microns per division. Range of travel is 23mm. Incorporates tension adjustment and safety Auto-focus stage stop lever. (Factory Installed)

focusing adjustment

ATTACHABLE FINGER ASSEMBLY FOR STABLE SLIDE PLACEMENT 
   • MA598: Attachable finger assembly for MA917R and MA917L

BUILT IN HIGH EFFICIENCY TRANSMITTED LED ILLUMINATION AND FUSE WITH ADJUSTABLE RHEOSTAT
   • LED/SP-1: 3W LED, 5500K color temperature
   • MA929: Spare 0.5A Fuse for LED illuminator

AC ELECTRIC CORD IS SUPPLIED WITH THE PROPER VOLTAGE SELECTED
   • MA809/10: Removable AC Electric cord with plug for 115V models (Included in all 115V models) or
   • MA809/20: Removable AC Electric cord with plug for 220V models (Included in all 220V models)

DUST COVER FOR DUST PROTECTION 
   • MA701: Dust Cover for MT5000 (PLEASE MAKE SURE THAT THE UNIT IS TURNED COMPLETELY OFF BEFORE PUTTING ON THE DUST COVER) 

FACTORY MANUAL SUPPLIED
   • Manual: MT5000 Meiji Techno Instruction Manual 
   • Warranty: Limited Lifetime Warranty Card  

Product Information: 
   • Manufactured: 100% MADE IN JAPAN
   • Warranty: LIMITED LIFETIME WARRANTY 
   • Customer Support: 1-(800) 832-0060 (U.S.A Based)

Package Information: 
   • Weight: 34 lbs (15.4kg)
   • Box Size: 16 x 14 x 21 inches 
   • Footprint: 263mm (D) x 176mm (W)
   • Binocular head type: 390 mm(D) x 410mm (H) x 210mm(W) (8.0kg)( 29.0 lbs)
   • Trinocular head type: 390 mm(D) x 465mm(H) x 210mm(W) (8.7Kg)( 30.0 lbs)
   • Binocular Ergonomic head type: 390 mm(D) x 483mm (H) x 210mm(W) (8.4kg)(31 lbs)
   • Trinocular Ergonomic head type: 390 mm(D) x 533mm(H) x 210mm(W) (8.9Kg)(33 lbs)

HD1000-LITE-M Includes:
   • HD1000-LITE - Camera HDMI 1/3 “ CMOS CHIP
   • HDMI to HDMI Cable 3 foot long cable
   • USB 2.0 to USB2.0 cable
   • Full SD CARD-H4SD card(4G)
   • Power Supply 12V AC./DC adapter
   • USB 2.0 Mouse
   • Measurement Software with Annotation Feature Installation Disc
   • 11.6" Monitor

Package Information:
   • 5lbs
   • 12 x 10 x 4 inches

NEW: BUILT-IN MOUSE CONTROL CAMERA
The significant innovation of the HD1000-LITE is making the software implant inside the camera. This forward thinking feature frees users from cumbersome computers and annoying buttons. You can control the camera by only a mouse directly.

01

Videos of the camera in action with our microscopes:
Brief overview with the compare feature
With Darkfield microscopy.

 

PERFECT COLOR REPRODUCTION
Meiji Techno's HD technology offers true-to-life reproduction on image color. What you see on the monitor is what you get from the microscope eyepiece. No compressed date transmission, resulting in scientific-grade images.

02

HDMI+USB 2.0+SD OUTPUT
Multiple output options are available for this powerful HDMI camera. HDMI 1080P, USB 2.0, or SD memory card can be used individually or all three SIMULTANEOUSLY.

03

DUAL FPGA PROCESSORS
With an innovative Dual FPGA processor architecture design, FPGA1 for image quality processing and FPGA2 for image output control, you get a high-speed preview without sacrificing image quality. It is the most powerful camera you deserve to have.

05

SMART PRESENTATION
Camera parameters such as exposure time, white balance, and gain are designed by default to operate automatically. Automatic optimum configuration is expected to be done in 0.015 seconds, and you'll find that the camera is easily managed from the start.

06

ADVANCED PARAMETER SETTING
For users with specific requirements, the camera is designed with parameter setting buttons that enable manual adjustment of white balance, gain, saturation, Gamma and screen freeze.

07

PC TO TV
Images are displayable on PCs and HDMI-installed TVs. All parameters can be controlled by the computer to adjust them to actual situations. This is advantageous in teaching and meeting applications.

08

On-board Video Saving
The SD card can save not only still images, but also dynamic images in 720P color definition, such that motion trails are recorded in fast speed and intact form.

09

LOW LIGHT SENSITIVITY
Thanks to its highly sensitive sensor, the HD1000-LITE is capable of capturing low-light images rapidly. In darkfield imaging and even fluorescence, it will automatically increase the sensitivity, presenting low light images with clarity in high-speed preview mode.

10

Model
Type
Version
Mega Pixels
Resolution
Frame Rate (FPS)
Sensor
C" Mount

HD1500T

HDMI/USB 2.0 Color 2-6MP 3264 x 1840 Static
1920 x 1080 Dynamic
60fps by HDMI
30fps by USB 2.0
1/2.8" CMOS 0.3X

HD1500TM
with 11.8" HDMI montior

HDMI/USB 2.0 Color 2-6MP

3264 x 1840 Static
1920 x 1080 Dynamic

60fps by HDMI
30fps by USB 2.0
1/2.8" CMOS 0.3X

HD1500MET

HDMI/USB 2.0 Color 2-6MP 3264 x 1840 Static
1920 x 1080 Dynamic
60fps by HDMI
30fps by USB 2.0
1/2.8" CMOS 0.3X

HD1500MET-M
with 11.8" HDMI montior

HDMI/USB 2.0 Color 2-6MP

3264 x 1840 Static
1920 x 1080 Dynamic

60fps by HDMI
30fps by USB 2.0
1/2.8" CMOS 0.3X

HD1500MET-AF
(Autofocus/Continuous 1-shot)

HDMI/USB2.0 Color 2-6MP

3264 x 1840 Static
1920 x 1080 Dynamic

60fps by HDMI
30fps by USB 2.0
1/2.8" CMOS 0.3X

HD1500MET-M-AF
(Autofocus/Continuous 1-shot/with 11.8" monitor)

HDMI/USB2.0 Color 2-6MP

3264 x 1840 Static
1920 x 1080 Dynamic

60fps by HDMI
30fps by USB 2.0
1/2.8" CMOS 0.3X

HD1000-LITE

HDMI/USB 2.0 Color 5MP

2592 x 1944

15fps by HDMI
15fps by USB 2.0

1/2.5" CMOS

0.3X

HD1000-LITE-M
with 11.8" HDMI montior

HDMI/USB 2.0 Color 5MP

2592 x 1944

15fps by HDMI
15fps by USB 2.0

1/2.5" CMOS

0.3X

HD1600T

USB 3.0 Color 16MP 4608 x 3456

25fps by USB 3.0

1/2.33" CMOS

0.3X

SS500-MC

Wifi Color 5MP 2912 x 1640 60fps by Wifi 1/2.3" CMOS 0.3X

WF300
Eyepiece Camera

Wifi Color 8MP 3200 x 2400 60fps by USB 2.0
30fps by Wifi
1/2.8" CMOS 20-43mm
Eyepiece Mount

WF200

Wifi Color 5MP 2592 x 1944 40fps by USB 2.0
15fps by Wifi
1/2.8" CMOS 0.3X

WF100
Document Scanner

Wifi Color 5MP 2592 x 1944 30fps by Wifi - -

X-1000U

USB 2.0 Color 5MP 2592 x 1911 10fps by USB 2.0 1/2.8" CMOS 0.3X

MIS-PL-DV24

USB 2.0 Color 2MP 1600 x 1200 30fps by USB 2.0 1/2" CMOS 0.5X

DK-LITE-B

USB 2.0 Color 1.5MP 1440 x 1080 10fps by USB 2.0 1/2.5" CMOS 0.5X

DK1000CB

USB 2.0 Color 2MP 1600 x 1200 15fps by USB 2.0 1/2" CMOS 0.5X

DK1000M

USB 2.0 Monochrome 1.3MP 1280 x 1024 30fps by USB 2.0 1/2" CMOS 0.5X

DK3000C

USB 2.0 Color 3.1MP 2048 x 1536 12fps by USB 2.0 1/2" CMOS 0.5X

DK5000C

USB 2.0 Color 5MP 2592 x 1944 5fps by USB 2.0 1/2.5" CMOS 0.7X

HD2000C

USB 2.0 Color 2MP 1920 x 1080 60fps by USB 2.0 1/3" CMOS 0.3X

ST1000C

USB 3.0 Color 5MP 2592 x 1944 60fps by USB 3.0 1/2.5" CMOS 0.5X

 

Frequently Asked Questions

Q: Start the software and get the camera recognized, but the preview is all black.
A: Check whether the anti-dust cap on the C-mount is removed. If already removed and attach the camera to the microscop, check whether the lighting path toggle switch to the camera. Then try to extend the exposure time and gain to get brighter images.

Q: The imaging scene from the eyepiece is in focus but the live images from the camera are still out of focus.
A: This is because the camera and the eyepiece are in different focal planes. Can consider to use adjustable adapter to connect camera to the microscope trinocular, and the adjust the adapter to make the live image in focus.

Q: There are some shadows on the image and the shadows always stay in the same position even when the sample is moved.
A: Possible reasons:
1. The anti-dust film on the camera C-mount is not removed. Remove the anti-dust film
2. Check to see if there is any dirt on the objective. Clean the objective.
3. Some dust on the surface of the camera IR filter. Clean the camera optical port.

Q: Camera frame rate is extremely slow.
A: Possible reasons:
1. Preview resolution is too high. Try lowering the resolution and check the change of the frame rate.
2. Exposure time is too long. If need exposure time longer than 200ms, try to use higher gain to get brighter images.
3. Computer issue. Computer is very old or the motherboard chipset is Intel 8 Series/C220 series.

Q: Start the software and get the error message: can not recognize the camera or No camera.
A: Possible reasons:
1. The camera USB cable is not well connected. Reconnect the camera again.
2. Check whether the camera is connect to the USB port on the front of the mainframe. If so, then connect it to the USB port on the back of the mainframe. The USB ports on the front of the mainframe are the extended ports from the motherboard which can not provide stable voltage and current for cameras.
3. The camera itself needs extra power supply but does not switch on the power. TrueChrome is required to switch on power, attach to the PC and then restart the software. TCC-6.1ICE is required to plug in power to be recognized by PC.
4. The camera driver is not installed or failed to install. Go to the "Device Manager" > "Imaging Devices" and check whether the camera is listed WITH YELLOW FLAG. Then re-install the driver again. If still fail to install to driver, please contact camera technical support for help.

Q: Image Field of View (FOV) is much smaller than the scene can be seen from the eyepieces.
A: Possible reasons:
The camera sensor size is not 1 inch. It needs reduce lens to get bigger FOV.
Low resolution is used to preview. Set full resolutionion.
The reduce lens does not match the camera sensor size.

Q: When push “Capture” button, sometimes the saved images are quite blurry.
A: It could be because some slight vibration happens on the camera during capturing the images.

Q: Security shield on ISCapture shortcut.
A: Some anti-virus or firewall softwaree installed in the PCs will identify the DLL files from ISCapture as virus and automatically isolate or delete the ISCapture software files. If have the warning message to delete or isolate the DLL files during the ISCapture installation, please ignore the warning message or set the ISCapture as trusted software. Otherwise, the ISCapture can not be used normally.

Q: Newer version software con not recognize the old cameras.
A: Currently, all the newer version software ISCapture is compatible with the previous version cameras EXCEPT TCA Series.

Q: After doing the measurement on the live images, the captured image is without any measurement data.
A: To save the live measurement on captured images, check the “Combined Measurements” checkbox in the File Save tab and then capture images. While doing the still image measurements, only click the Save or Save As on the right hand side shortcut to save the data on the images.

Q: The live images and the captures images color is quite different from the one we can see from the eyepieces.
A: Because of the different lighting source, White Balance is needed to correct the image color.

Q: How to do quick White Balance?
A: White Balance while attached to camera to stereo microscope: Use a white paper to replace the sample. Click on “White Balance” to correct the image color > Remove the white paper and put back the sample.
White Balance while attach the camera to the biological microscope: Move the sample slide to the blank area. Click on “White Balance” and move back the sample.

Q: After install ISCapture and firstly start the software, but get the error “The program can’t start because MSVCP100.dll is missing from your computer. Try reinstalling the program to fix this problem.”


A; This is because the operating system lack of some Visual C++ 32bit library files which the ISCapture needs to call them. Without these files, the software can not be started normally. Install the patch VCredist_x86.exe (can be found in the CD that comes with the camera or go to http://www.microsoft.com/en-us/download/details.aspx?id=5555

Q: Start the ISCapture but get the error “Unable to execute file C:\Program Files\ISCapture\ISCapture.exe CreateProcess failed; code 740.

 


A: Completely remove the ISC Capture, reboot the PC and then right click on ISCapture installer (ISCapture Setup.exe) and select “Run as Administrator” to install the ISCapture. When you first start the software right click on the ISC icon and select “Run as Administrator” to start it.

Q:When start ISCapture, get error message “Cannot find the USB Key!”

A: The software is encrypted. Specific USB key is needed to attach to the computer port first.

Q:After capturing several images, it takes more and more time to save a frame image. Sometimes it is even up to more than 30 seconds, and then finally the software hang or crash.
A: If the image save directory is the network driver, during uploading the files to network driver, it will significantly increase the COP usage. When the CUP usage is up to 100%, the software will hang or crash. Recommend to change the file save directory to the computer hard disk.

Q: Whether can share the calibration files on different PCs?
A: If using the ISCapture earlier version than V4.0: Go to the folder “Application Data/ISCapture” in system disk, find the file “calibrationTable.ini” and copy it to another PC under the same directory. (The “Application Data” folder is a hidden folder, you might need to make the system invisible visible first.)
If it is ISCapture V4.0 or later, go to the Parameter tab and click “Backup” to backup the parameter settings and copy them to another PC to restore them.

Q:After install the ISCapture and every time I run the software i get the error:

A: This is because some program in the user’s PC is using the library file ‘libiomp5md.dll’which will conflict with the ISCapture. So far as we know, the software GoPro Studio will conflict with ISCapture. To solve this issue, please try to remove the libiomp5md.dll from the C:\Windows\System32 folder while using the ISCapture.

Q: Shortcut keys for ISCapture to capture still images and videos:
A: With ISCapture V3.6.6 or later, running the ISCapture first, Press F9 key on the keyboard to capture images. Press F10 to start the video recording. If in manual recording mode, press F11 to stop the recording.

Q: On preview images, lots of horizontal lines appear.


A: This is because of the lighting frequency. Extend exposure time or turn off the filament lamp or fluorescent lamp in the environment to solve this issue.

Q:Recording issue when connected to the HD1500T/HD1000 Series to the monitor and recorded video directly to the SD card? If so, do you know what the capacity of the SD card the user used during recording the videos?
A:When recording videos to the SD card, the camera only supports the SD card with format SDHC. It can not work with the SD card format SDXC. And max. capacity of the SDHC format SD card is 32GB which means the SD card with capacity >= 64GB, is format SDXC.
If already use SDHC format SD card, please help to confirm the information below:
1). Whether the customer used the SD card came with the HD1500T/HD1000 camera?
2). If not, what exactly the model of the SD card the customer used? Maybe some picture of the SD card.

If got the issue while connect the camera to the computer, I need to confirm below information:
1). The software always stop recording AUTOMATICALLY after 5-10 minutes?
2). Whether the software or the computer freeze if MANUALLY stop the recording?

Details

The MT5000 Microscopes features include:

  • Compact Space Saving Footprint design with ergonomics in mind
  • Infinity Corrected Optical System (ICOS™) with all newly designed optics
  • Comfortable Siedentopf-type Binocular and Trinocular Viewing heads
  • Optional Ergonomic tilting binocular head- Adjustable vertically from 10°to 50° degrees
  • Ceramic Coated Stage with Ergonomically Placed Low Position Drop down Control
  • Low Positioned Ergonomic Coaxial Focus Control
  • Smooth Operating Ergonomic Quintuple Nosepiece
  • Brightfield and Phase Contrast Observation modes available
  • Super Bright LED Koehler illumination, lambertian LED design
  • Integrated 30-Watt Halogen Transmitted illumination System on selected Brightfield and Phase Contrast Models
  • Abbe and Zernike Phase Contrast Condensers available
  • Integrated Automatic Voltage Sensing Power Supply with localized power cord
  • Wide Range of Filters and Accessories

 

Brightfield:
The simplest of all the optical microscopy illumination techniques. Sample illumination is transmitted (i.e., illuminated from below and observed from above) white light and contrast in the sample is caused by absorbance of some of the transmitted light in dense areas of the sample. Brightfield microscopy is the simplest of a range of techniques used for illumination of samples in light microscopes and its simplicity makes it a popular technique. The typical appearance of a brightfield microscopy image is a dark sample on a bright background.

Phase Contrast:
An optical microscopy technique that converts phase shifts in light passing through a transparent specimen to brightness changes in the image. Phase shifts themselves are invisible, but become visible when shown as brightness variations. When light waves travel through a medium other than vacuum, interaction with the medium causes the wave amplitude and phase to change in a manner dependent on properties of the medium. Changes in amplitude (brightness) arise from the scattering and absorption of light, which is often wavelength-dependent and may give rise to colors. Photographic equipment and the human eye are only sensitive to amplitude variations. Without special arrangements, phase changes are therefore invisible.

The MT5000 Series is one of our most rugged fully equipped biological microscope systems. Created to meet the demands of researchers and clinical laboratory specialists. The MT5000 Series microscopes feature a new computer engineered rigid frame that incorporates low positioned coaxial coarse/fine focus controls and ergonomic stage design for maximum efficiency and comfort while providing and extremely stable platform. The cast aluminum alloy metal stand has a chemical resistant finish and is the most rugged, durable finish in the market today. Equipped tension adjustment controls and a built in stage stop lever to protect the specimen and objectives from accidental damage during use. The MT5000 Series offers an outstanding range of optical performance with an emphasis on all newly engineered high performance U. Plan optics. The new optics, provide exceptionally bright, crisp images with good color rendition and superior flat fields of view. The MT5000 Series have bigger stage and 30mm wider eyepiece compared to the MT4000 Series.

VIEWING HEADS
Model MA815 is the Siedentopf-type binocular head and Model MA816 is the trinocular head for camera integration. Each head has the eyetubes inclined at 30 degrees with the left eyetube having graduated diopter settings. The interpupillary distance is adjustable between 53mm - 75mm. An 80/20 beamsplitter for the trinocular tube can be engaged for photo work. (100% to eyetubes or 80% to phototube & 20% to the eyetube.) The optional MA957, Ergonomic Binocular Viewing Head, has the inclination adjustable from 10 to 50 degrees to fit users of different heights. The Ergonomic Trinocular model comes with the MA958, photo/video attachment with sliding 80/20 beam-splitter (Included in MT5300ED).

EYEPIECES
10X Super Widefield High Eyepoint eyepieces F.N.22 are standard, and 15X and 20X eyepieces are available as an option. A Super Widefield High Eyepoint 10X focusable eyepiece that accepts 25mm reticules is also available.

OBJECTIVE CHANGER
Quintuple nosepiece provides effortless objective changes with smooth-operating, ball bearing mounted.

OBJECTIVES
Meiji Techno America offers an assortment of Planachromat Infinity Corrected (ICOS) objectives for Brightfield, Darkfield and Phase Contrast observation modes.

STAGE
Ceramic coated standard right-handed or optional left-handed controls, flat top stage 191mm x 140mm with travel: 80mm(X) x 52mm(Y). Ergonomically positioned coaxial drop down controls. Available with motorized focus and stage controls.

CONDENSER
New design centerable Abbe 1.25 N.A. Condenser with built-in iris diaphragm in dovetail mount.

ILLUMINATION
Powerful white LED illumination provides enhanced image quality and brightness for the observation of specimens and photomicroscopy.

PHOTOMICROGRAPHY
Meiji Techno offers a broad range of digital video cameras which offers excellent sensitivity, high resolution and a wide dynamic range for the most demanding brightfield and darkfield microscopy applications including clinical pathology and cytology, life sciences and geology. Some models has included software, that can preview and capture still shots and live videos to a PC or Mac with USB port or HDMI connectivity.

Details

Biological TerminologyModel
Model
Head
Illumination
Eyepieces
Objectives
Stage
Condenser

MT5200L

Binocular
LED Illumination
 
SWH10x FN22
U.Plan 4x, 10x, 40x, 100x oil
Fixed flat-top left or right-handed controls
Abbe NA 1.25 with iris in dovetail mount

MT5200EL

Ergonomic Binocular

MT5300L

Trinocular

MT5300EL

Ergonomic Trinocular

MT5200H

Binocular
Koehler 30W halogen

MT5200EH

Ergonomic Binocular

MT5300H

Trinocular

MT5300EL

Ergonomic Trinocular

Components & Accessories

Included:
   • MT5300EL: Trinocular Brightfield Compound microscope with Bright LED Koehler illumination with quintuple nosepiece and auto voltage sensing power supply
   • MA957: Ergonomic Tilting Binocular head-Adjustable vertically from 10 to 50 degrees, Siedentopf type .I.P. adjustment 53mm to 75mm, graduated diopter on left eyetube ( 30.0mm I.D. eyetube)
   • MA958: Photo/video attachment with sliding 80/20 beam-splitter.  For use with video or digital cameras when MA957 ergonomic head is used
   • MA817 (x 2): SWH10X high eyepoint eyepiece, Field No. 22, Tube O.D. 30.0MM (each)
   • MA906 (x 2): Rubber Eyeshield for MA817, SWH10X eyepiece (each)
   • MA831: U. Plan Objective 4X, N.A 0.10, W.D. 25.8mm, F.N. 24
   • MA832: U. Plan Objective 10X, N.A. 0.25, W.D. 10.7mm, F.N. 24
   • MA834: U. Plan Objective 40X, N.A. 0.65, W.D. 0.5mm, F.N. 24
   • MA837: U. Plan Objective 100X oil, N.A. 1.25, W.D. 0.23mm, F.N. 24
   • MA910: Abbe condenser, N.A. 1.25 with iris diaphragm and dove-tail mount
   • MA918R: Ceramic coated flat-top stage, 170mm x 140mm, 80mm x 52mm
   • MA598: Attachable finger assembly for MA917R and MA917L
   • LED/SP-1: 3W LED, 5500K color temperature
   • MA929: Spare fuse 0.5A for MT5000 LED Illuminator
   • MA809/10: Removable AC Electric cord with plug for 115V models
   • MA701: Dust Cover for MT5000 
   • MA151/35/03: C” mount adapter with 0.3X lens
   • HD1000-LITE-M: The HD1000-LITE is a HDMI /USB2.0 camera technology from Meiji Techno! It is the most economical HDMI & USB 2.0 camera in the market. 

OPTIONAL COMPONENTS & ACCESSORIES BELOW

Viewing Heads:
   • MA815: Binocular head - Siedentopf type, I.P. adjustment 53mm to 75mm, graduated diopter on left eyetube (30.0 mm I.D. eyetube). Inclined at 30 degrees Inverted Image (Included in Models MT5200L, MT5200H, MT5210L and MT5210H)
   • MA957: Ergonomic tilting binocular head - Adjustable vertically from 10 to 50 degrees (30.0 mm I.D. eyetube) Erect image (Included in MT5200EL & MT5200EH)

Photo/Video Attachment:
   • MA958: Photo / video attachment with sliding 80/20 beam-splitter. For use with video or digital cameras when MA957/05 ergonomic head is used (Included in all Ergonomic Trinocular models)

Eyepieces:
   • MA818: SWH 15X Widefield high eyepoint eyepiece, Field No. 16.0, tube O.D. 30.0 mm (each) (19mm reticle mount)
   • MA819: SWH 20X Widefield high eyepoint eyepiece, Field No. 12.0, tube O.D. 30.0 mm (each) (19mm reticle mount)
   • MA859: SWH 10X-F Focusing eyepiece with reticle mount (without reticle), tube O.D. 30.0 mm (each) (25mm reticle mount)

U. Plan Objectives:
   • MA830: U. Plan Objective 2.5X, N.A. 0.07, W.D. 5.7mm, F.N. 24
   • MA833: U. Plan Objective 20X, N.A. 0.40, W.D. 7.29mm, F.N. 24
   • MA835: U. Plan Objective 50X oil, N.A.0.87, W.D. 0.28 mm, F.N. 24
   • MA836: U. Plan Objective 50X oil with iris, N.A. 0.87, W.D. 0.28mm, F.N. 24
   • MA838: U. Plan Objective 100X oil with iris, N.A. 1.25, W.D. 0.23mm, F.N. 24 

U. Plan Phase Objectives:
   • MA839: U. Plan Phase Objective 10X, N.A. 0.25, W.D. 10.7mm, F.N. 24 (Included in Models MT5210L, MT5310L, MT5210H, MT5310H and Ergo models)
   • MA840: U. Plan Phase Objective 20X, N.A. 0.40, W.D. 7.29mm, F.N. 24 (Included in Models MT5210L, MT5310L, MT5210H, MT5310H and Ergo models)
   • MA841: U. Plan Phase Objective 40X, N.A. 0.65, W.D. 0.5mm, F.N. 24 (Included in Models MT5210L, MT5310L, MT5210H, MT5310H and Ergo models)
   • MA842: U. Plan Phase Objective 100X oil, N.A. 1.25, W.D. 0.23mm, F.N. 24 (Included in Models MT5210L, MT5310L, MT5210H, MT5310H and Ergo models)

Zernike Phase Condenser:
   • MA913: Zernike Phase condenser with centerable phase annuli for 10X, 20X, 40X, 100X with brightfield position, dark-field stop for 40X objective, (Black-out position for epi-fluorescence on MT6000 Series only) with iris in dove tail mount (Included in Models MT5210L, MT5310L, MT5210H and MT5310H and Ergo models)

Other Zernike Components:
   • MA458/05: Centering Telescope, 30.0 mm O.D. (Included in Model MT5210L, MT5310L, MT5210H and Ergo models)
   • MA861/05: Green Interference filter (GIF), 44.0 mm diameter, unmounted (Included in MT5210L, MT5310L, MT5210H and MT5310H and Ergo models)

Brightfield Condensers:
   • MA910/10: Abbe condenser, N.A. 1.25, with centerable Phase annuli in slider for use with 20X and 40X Phase objectives, with iris diaphragm and dovetail mount
   • MA910/15: Abbe condenser, N.A. 1.25 with darkfield stop in slider for use with 20X and 40X brightfield objectives, with iris diaphragm and dovetail mount
   • MA911: Achromatic condenser, N.A. 1.25 with iris diaphragm and dovetail mount
   • MA976: Abbe condenser, N.A. 0.90 with swing out top lens, iris diaphragm and dovetail mount For use with low power scanning objective, MA830

Darkfield Oil Immersion Objectives & Condenser System:
   • MA836: U. Plan Objective 50X oil with iris, N.A. 0.87, W.D. 0.28mm, F.N. 24
   • MA838: U. Plan Objective 100X oil with iris, N.A. 1.25, W.D. 0.23mm, F.N. 24
   • MA914: Darkfield condenser, N.A. 1.25, dove-tail mount (with ball bearing)

Polarizer:
   • MA915: Polarizer set for MT5000 Series microscopes
   • MA915/PT#2: Unmounted 43mm polarizing filter for use with MA1043 Intermediate tube
   • MA1043: Intermediate tube with built in analyzer and compensator slot for MT4000 & MT5000 Series (requires a MA915/PT#2 43mm polarizing filter)

Filters:
   • MA858/05: ND 25 Neutral density filter, 44.0mm diameter, unmounted
   • MA856/05: LB100 Blue Clear filter 44.0mm diameter, unmounted (Included with all halogen models) (Included with MT5200H, MT5300H, MT5210H,    • MT5310H and Ergo halogen models)
   • MA857/05: Green filter, clear, 44.0mm diameter, unmounted
   • MA861/05: Green Interference filter,(GIF) 44.0mm diameter, unmounted (Included with MT5210L, MT5310L, MT5210H, MT5310H and Ergo models)

Stages
   • MA918L: Ceramic coated flat-top stage, 190mm x 140mm with 80mm x 52mm X-Y movement, and left hand drop-down coaxial controls
   • MA598: Attachable finger assembly for MA918R and MA918L
   • MA676: Attachable clinical finger assembly for MA918R and MA918L

Eyepiece Micrometers (25mm diameter for the use with MA817 SWH 10x eyepiece)
   • MA523: Cross-line reticle, 25mm diameter
   • MA506: 10mm line divided into 100 units, 25mm diameter
   • MA509: 5mm line divided into 100 units, 25mm diameter
   • MA524: 10mm square divided into 400 parts, each square 0.5 mm, 25mm diameter
   • MA510: 10mm square divided into 100 parts, each square 1.0 mm, 25mm diameter

Stage Micrometers
   • MA285: 1mm divided into 100 units, 0.01mm
   • MA286: 0.04” divided into 40 units, 0.001”

Replacement Bulbs & Fuses
   • LED/SP-1: 3W LED, 5500K color temperature
   • MA929: Spare fuse 0.5A for MT5000 LED Illuminator

Miscellaneous
   • MA977: Eye level riser for MT Series stands