Description
Epi-Fluorescent with LED:
Intensity from a conventional lamp decreases through its life, which means that illumination varies dramatically over time. The lifetime of LED’s far exceeds that of these older lamps, ex. Mercury, Metal Halide, Xenon models and intensity remains broadly constant throughout its life providing a stable, repeatable light source. Some of the many fluorophores excited by the PE-300 Series are FITC, DAPI, Cy3, Auramine, TxRed, mCherry, TRITC, ChR, Hoechst, Cy5, Calcofluor, RFP to name a few.
Note: First decide on the Microscope model that fits your requirement, Binocular or Trinocular, or Ergo-Binocular or Ergo-Trinocular model. Secondly decide on the proper Meiji Techno CoolLED illumination unit for your application. Simple to Choose: No alignment or adjustment needed once installed, already configured for your everyday fluorophores such as DAPI, FITC, TRITC &Cy5 and affordable through your lab consumables budget.
The PE-300W/LEDMT white is a compact and simple to use LED illumination unit. It provides a broad spectrum of illumination, covering the excitation bands of common fluorescent stains. Operation is by a remote manual control pod with instant on/off and intensity control from 0-100%. Remote control is available via USB or TTL trigger.
The PE-300W/LEDMT white now delivers DOUBLE the intensity at the microscope sample plane. It allows adjustment of output in 1% steps, giving precise control. The broad spectrum covers everyday fluorophores: DAPI, CFP, Aqua, FITC, TRITC, TxRed, Cy5 and many more. Simple to Fit: Direct fit means the CoolLED unit just attaches straight onto the microscope’s epi-fluoresence port in seconds which is optimized for light output for your microscope. Simple to Use: Instant On/Off with the ability to optimize intensity and minimize sample damage via the simple desktop Control Pod, really simple to fit and use immediately with less down time for set-up.
DAPI can be excited at either 365nm or 400nm and microscopes typically have a filter set which allows one or other of these wavelengths to be transmitted. To accommodate this, the pE-300white can be specified in one of two waveband configurations to match with the user’s existing filter sets within the microscope.
A microscope which is populated with a number of single band (“SB”) filter sets will typically have DAPI excitation at 365nm and a microscope with multi-band (“MB”) filter(s) has excitation at 400nm. The user can specify the configuration which is appropriate for their microscope.
Power requirements
100-240V a.c. 50/60Hz, 2A
Power consumption
Standby Max 2W
2018-2019 Meiji Techno America MT6000 LED Series Fluorescent Microscopes
113
1 band (GYR) at 100% intensity Max 20W
2 bands (BLU & GYR) at 100% intensity Max 38W
White (all 3 bands) at 100% intensity 46W
The PE-300L/LEDMT is a simple white light LED illumination system that offers intense, broadspectrum LED illumination for imaging most common fluorescent stains.
The PE-300L/LEDMT Light Source can be fitted directly to the microscope or specified with a liquid light guide. The system is a mercury-free alternative that is safer, more controllable, and repeatable than conventional high-pressure gas discharge illuminators. Spectral coverage is from the UV (DAPI excitation) to the Red region (Cy5 excitation). The system is perfect for hospital and regular research laboratory environments and is affordable within consumables budgets.
DAPI can be excited at either 365nm or 400nm and microscopes typically have a filter set which allows one or other of these wavelengths to be transmitted. To accommodate this, the pE-300lite can be specified in one of two waveband configurations to match with the user’s existing filter sets within the microscope.
A microscope which is populated with a number of single band (“SB”) filter sets will typically have DAPI excitation at 365nm and a microscope with multi-band (“MB”) filter(s) has excitation at 400nm. The user can specify the configuration which is appropriate for their microscope.
Power requirements
100-240V a.c. 50/60Hz, 1.4A
Power consumption
2W (standby)
46W (full white intensity)
Microscope with Epi-Fluorescence is an optical microscope that uses fluorescence and phosphorescence instead of, or in addition to, reflection and absorption to study properties of organic or inorganic substances. The “fluorescence microscope” refers to any microscope that uses fluorescence to generate an image, whether it is a more simple set up like an epifluorescence microscope, or a more complicated design such as a confocal microscope, which uses optical sectioning to get better resolution of the fluorescent image. Equipped with Chroma filters and a six position filter holder, there is a slot to add 3 more filter cubes and desired filters for your specific experiment or application.
The MT6200CL, MT6200CW & MT6300CL, MT6300CW Series employs Meiji Techno’s all new ICOS™ (Infinity Corrected Optical System) making the study of mounted specimens fast and easy while delivering an excellent cost-to-performance ratio. The MT6200CL, MT6200CW & MT6300CL, MT6300CW Series microscopes are configured for brightfield and epi-flourescence but can also be outfitted with optional phase contrast, polarized light and darkfield components. System modularity makes purchase and operation very affordable for colleges, universities, researchers and clinics. 2018-2019 Meiji Techno America MT6000 LED Series Fluorescent Microscopes 114
Features:
• Computer Aided Design Frame and Optics
• Ergonomically positioned controls
• Comfortable Siedentopf Viewing Heads
• Quintuple turret DIN nosepiece
• Six Position Fluorescence Module with three Chroma Fluorochromes included :
• CHROMA – 19002 – AT-GFP/FITC – Basic Blue
• CHROMA – 19004 – AT-TRITC/Cy3 – Basic Green
• CHROMA – 3900 – AT-DAPI/Hoechst/AlexaFlour – Basic UV
• MA898 Empty filter cube available as an option to fit in the additional 3 empty filter cube
spots for specialized Chroma filters
• Newly Designed Semi Apo Plan Fluorescence Objectives
• Brightfield, Darkfield, Phase Contrast, Polarized Light and Epi-Fluorescence modes
• Reduced risk of eye damage
• Quiet operation
• No special disposal regulations or issues
• Optional motorized stage and focus drive
• Optional Ergonomic Binocular or Trinocular Viewing Head available
• LED Transmitted Koehler + CoolLed Epi Module
• LED products are more sustainable and energy efficient than conventional illuminators
• Mercury-free
• Energy Efficient: 80% less power
• Long lifetime (25,000 operating hours)
• No Bulb replacements
• Works with everyday fluorophores/stains
• Affordable through lab consumables budget
• Broad spectrum – covers UV (DAPI) to Red region (Cy5)
• Specify for existing single and multi-band filter sets – no need to buy new filters
• Instant on/off – No shutters required, no warm up or cool down
• Stable & repeatable – reliable and consistent results
• Precise intensity control in 1% steps (0-100%) – no ND filters required
• Excellent uniformity over field of view – fixed and stable, no alignment necessary
|
Model
|
Head
|
Illumination
|
Eyepieces
|
Objectives
|
Stage
|
Condenser
|
|
MT6200CL |
Binocular
|
Incident PE-300L/LEDMT CoolLED + Transmitted Koehler LED
|
SWH10x FN22
|
Semi Plan Apo F10x, F20x, F40x, F100x
|
Fixed flat-top left or right-handed controls
|
Abbe NA 1.25 with iris in dovetail mount
|
|
MT6200ECL |
Ergonomic Binocular | |||||
|
MT6300CL |
Trinocular
|
|||||
|
MT6300ECL |
Ergonomic Trinocular | |||||
|
MT6200CW |
Binocular | Incident PE-300W/LEDMT CoolLED + Transmitted Koehler LED | ||||
|
MT6200ECW |
Ergonomic Binocular | |||||
|
MT6300CW |
Trinocular | |||||
|
MT6300ECW |
Ergonomic Trinocular |
VIEWING HEADS
Model MA815 is the Siedentopf-type binocular head and MA816 is the trinocular head for camera integration. Each head has the eyetubes inclined at 30 degrees with the left eyetube having graduated diopter settings. The interpupillary distance is adjustable between 53mm – 75mm. An 80/20 beamsplitter for the trinocular tube can be engaged for photo-microscopy; 100% to eyetubes or 80% to phototube & 20% to the eyetube. The optional MA957, Ergonomic Binocular Viewing Head, has the inclination adjustable from 10 to 50 degrees to fit users of different heights. The Ergonomic Trinocular model comes with the MA958, photo/video attachment with sliding 80/20 beam-splitter (Included in MT6300EH).
EYEPIECES
10X Super Widefield High Eyepoint eyepieces F.N.22 are standard, and 15X and 20X eyepieces are also available as an option. A Super Widefield High Eyepoint 10X focusable eyepiece that accepts 25mm reticules is also available.
OBJECTIVE CHANGER
Quintuple nosepiece provides effortless objective changes with smooth-operating, ball bearing mounted.
OBJECTIVES
Meiji Techno offers an all new assortment of Infinity Corrected Semi Apochromat objectives for Fluorescence Microscopy and U.Plan Objectives for Brightfield/Darkfield, Phase and Polarized work
STAGE
Ceramic coated flat top stage measures 191mm x 126mm with 100mm x 100mm x-y travel. Ergonomically positioned left or right-handed coaxial drop down controls. Available with motorized components.
CONDENSER
Abbe condenser NA 1.25 with iris in dovetail mount is included. Optional condenders include a Zernike Phase Contrast Condenser NA 1.25 with iris in dovetail mount and darkfield condenser with dovetail mount.
ILLUMINATION
A powerful LED lamp provides enhanced image quality and brightness for the observation of specimens. The standard Modular Six Position Epi-fluorescent illuminator employs a PE-300L/LEDMT LED fluorescence illumination Kit, configured for fluorophores such as DAPI,FITC,TRITC & Cy5, Instant on/off with the ability to optimize intensity and minimize sample damage via the simple desktop Control Pod with a manual control pod and power supply (Included in MT6200CL & MT6200ECL & MT6300CL & MT6300ECL models)
•PE-300L/LEDMT: LED fluorescence illumination kit, configured for fluorophores such as DAPI, FITC , TRITC & Cy5, instant on/off with the ability to optimize intensity & minimize sample damage via the simple desktop Control Pod with a manual control pod and power supply. (Included in MT6200CL & MT6200ECL & MT6300CL & MT6300ECL models)
•PE-300W/LEDMT: LED fluorescence illumination kit, configured for fluorophores such as DAPI, FITC, TRITC & Cy5, adds greater control options to the platform, 3 channel control pod allows selection and control of excitation wavelength whether its to balance your FITC against your TRITC or to minimize bleaching by exciting only the markers that you are working. Supported by popular imaging software giving integrated control with your imaging set up time after time. An additional benefit of the PE-300W/LEDMT is that stains can be viewed either individually or in combination, without filter cube changes. This makes it ideal for use with multi-band filter sets as the screening process can be simplified when fewer filter cubes are used. Independent control for the three LED channels means that the user can control the level of excitation of each fluorescent stain independently on a multi-stained samples, potentially removing the need for single band filter sets altogether. Instant on/off with the ability to optimize intensity and minimize sample damage via the simple desktop Control Pod with a manual control pod and power supply.
(Included in MT6200CW & MT6200ECW & MT6300CW & MT6300ECW models)
PHOTOMICROGRAPHY
Meiji Techno offers a broad range of digital video cameras which offers excellent sensitivity, high resolution and a wide dynamic range for the most demanding brightfield and darkfield microscopy applications including clinical pathology and cytology, life sciences and geology. Some models has included software, that can preview and capture still shots and live videos to a PC or Mac with USB port or HDMI connectivity.
![MA838 U. Plan 100X Objective Oil with Iris [DISCONTINUED]](https://meijitechno.com/wp-content/uploads/2023/09/ma838_2-300x225.jpg)
![MA613 Semi Plan Achromat 10X Objective [DISCONTINUED]](https://meijitechno.com/wp-content/uploads/2023/09/ma613_1-300x225.jpg)
