MT-PEL Pelican Case

MT/EM Pelican Case with pull out foam Insert 21½(L) x 16½(W) x 12½ (D), portable pull out handle and wheels. Total protection for your microscope equipment. Microscope can fit into the high density foam or padded dividers for total subjection and protection against impact, vibration or shock.

Locate a DealerGet a Quote

SKU: mt-pel_pelican_case Categories: ,

Description

The MT-PEL features include:

  • Watertight
  • Exterior Dimensions: 21 1/2″ x 16 1/2 x 12 1/2″
  • Colors: Black
  • Watertight
  • Crushproof
  • Corrosion-Proof
  • Airtight
  • Dustproof
  • All cases meet or exceed all military specifications
  • Lifetime manufacturer’s warranty
  • Cases are made of ultra-high-impact structural copolymer polypropylene
  • Latches are A.B.S.
  • O-ring seals are .250 neoprene closed cell sponge
  • Foam is 1.65 lbs. polyether Pick ‘N’ Pluck foam
  • Equipped with foam for total equipment protection
  • One-way automatic purge valves are A.B.S., stainless steel with brass inserts and neoprene 0-ring seals
  • Cases meet Mil-STd 4150-J:
  • Stacking (400 lbs.)
  • Drop Test (48″)
  • Humidity (120° at 95% RH)
  • Immersion (2″ at 160° F)
  • Atmospheric pressure purge valve included
  • Note: Contents not included

Additional information

Weight 1.0000 kg
Downloads

Double click to read at full screenDownload Manual (PDF)

Magnification

N/A

Specifications

Body: Polypropylene Foam: 1.3 lb Polyurethane Latch: ABS Purge Body: ABS Lid O-Ring: Polymer Purge Vent: 3 Micron Hydrophobic Non-Woven PET Pins: Stainless Steel Purge O-Ring: 70 Shore Nitrile Interior: 21.48" (L) x 16.42" (W) x 12.54" (D) (54.5 x 41.7 x 31.8 cm)  Exterior: 24.76" (L) x 19.57" (W) x 13.9" (D) (62.9 x 49.7 x 35.3 cm)  Interior Cubic Volume: 2.56 cubic feet (72.48 cubic decimeter) LID DEPTH: 2.01" (5.1 cm) Bottom Depth: 10.53" (26.7 cm) Total Depth: 12.54" (31.8 cm) Buoyancy: 149.91 lbs (68 kg) Range Temperature: -40 / 210° F (-40 / 99° C) Master Pack Weight: 26.9 lbs (12.2 kg)
WATERTIGHTThe secret is the tongue and groove fit with a polymer o-ring acting as a waterproof seal.
EASY ROLLERStainless steel ball bearing wheels last longer and ride smoother. The nylon hub adjacent to the stainless steel is made to resist heat. The result is less wear and tear on the polyurethane wheel.
REINFORCED PADLOCK PROTECTORSStainless steel reinforced padlock protectors provide added strength and extra security against cutting and theft
DOUBLE-THROW LATCHESThe Double-Throw latches are smarter and easier to open: it’s the classic “C” clamp design with a secondary movement that works like a pry bar to start the release and offers plenty of leverage to open with a light pull.
COOL UNDER PRESSURE The Automatic Pressure Equalization Valve releases built-up air pressure while keeping water molecules out, resulting in a water – tight case that is even easier to open.
PICK 'N' PLUCK FOAM (PRE-SCORED)Pick 'N' Pluck is a pre-scored foam set made for quick and easy customization. Just measure your equipment and pluck away the 1/2" cubes for a customized fit. Six-piece foam set contains one base pad layer, four Pick 'N' Pluck polyethylene foam layers, and one convoluted top lid foam layer.