MT6300ECW-HD1500MET-AF/0.3 100X-1000X Ergonomic Tilting Trinocular 10° to 50° degrees Epi-Fluorescence Biological Microscope with LED Light Source and HD Auto-focusing Camera (HD1500MET-AF)

This configuration system contain's Meiji Techno's MT6300ECW and our HD camera called HD1500MET-AF.


Meiji Techno's new MT6300ECW Series laboratory grade upright microscopes are our new Biological (LED Epi-Fluorescence) microscopes with an ergonomic tilting binocular head that tilts from 10° to 50° degrees to accommodate most users heights. The trinocular port facilitates digital cameras such as HDMI based CCD, CMOS, SLR, Analog models that can be connected with specialized adapters available at Meiji Techno America. The process to capture images is easier than ever. The MT6300ECW Series employs Meiji Techno’s all new ICOS™ (Infinity Corrected Optical System) making the study of mounted specimens fast and easy while delivering an excellent cost-to-performance ratio. The MT6300ECW Series microscopes are configured for Brightfield and Epi-fluorescence but can also be outfitted with optional Phase contrast, Polarized light and Darkfield components. System modularity makes purchasing and operation very affordable for colleges, universities, researchers and clinics.


Epi-Fluorescence Microscopes with a LED light source has its advantages, such as intensity from a conventional lamp decreases through its life, which means that illumination varies dramatically over time. The lifetime of LED’s far exceeds that of these older lamps, ex. Mercury, Metal Halide, Xenon models and intensity remains broadly constant throughout its life providing a stable, repeatable light source. Some of the many fluorophores excited by the PE-300 CoolLED add-on series are FITC, DAPI, Cy3, Auramine, TxRed, mCherry, TRITC, ChR, Hoechst, Cy5, Calcofluor, RFP to name a few.


The HD1500MET-AF is our full featured 6 MP camera with a 1/2.8” CMOS chip. The HD1500MET-AF features a full HD (1080x1920) resolution, which provides high fidelity images with a refresh rate of 60fps (frams per second) when connected via HDMI or 30fps when connected via USB2.0, so there is absolutely no lag in the live video feed when moving your specimen or part. 


The HD1500MET-AF can be connected to a PC and can be used with the provided USB 2.0 mouse, with this the user can access menus that provide all the features of the camera such as exposure, white balance, color control (red or blue), gamma, brightness, sharpness, saturation, denoise, color temperature plus allows the user to save images and videos directly on the full SD card due to the onboard operating system. You can flip the image horizontally, vertically, do a split screen where-in one side of the monitor is a live image and the other half is the captured image. You can also digitally increase/decrease the zoom if needed if your stereo system has reached it’s magnification potential, this will give you the added digital magnification needed. You can also superimpose a cross-line reticle directly on your live image, first click gives you a red line second click gives you a green line, and the third click omits the crossline. The live video and still shots can be saved directly on the removable full SD card for subsequent image capture. All this is achieved without the need for a PC. Connectivity direct to any monitor or TV with a HDMI port for a wider view if necessary. All USB 2.0, HDMI, SD card, power supply is all supplied. You can also attach a wireless mouse if you choose to go wireless with a third party mouse.


The HD1500MET-AF is equipped with a complete Metrics Measurement software that can be utilized when connecting directly to a PC or through the camera connected to a monitor via HDMI. The HD1500MET-AF provides extremely powerful measurement functionality including: freehand lines, rectangles, polygons, circles, bi-circles, angles, point-line distance and much more. In addition to the ability to measure point-line distance, angles, the length of curves and lines, the camera can measure the perimeter & area of enclosed features such as: rectangles, polygons, and circles. The unique calibration and magnification functions coupled with the ability to export the results to Excel or text files, make measurements more convenient and simple.

NOTE: 
• 6MP Still resolution 3264x1836
• 2MP Live video 1920x1080 60 fps (frames per second) via HDMI 
• 2MP Live video 1920x1080 30 fps (frames per second) via USB2.0


Made In Japan


Locate a DealerGet a Quote


cerohs

MT6300ECW-HD1500MET-AF/0.3

MT6300ECW-HD1500MET-AF/0.3 Trinocular Ergonomic Microscope with Epi-Fluorescence is an optical biological microscope that uses fluorescence and phosphorescence instead of, or in addition to, reflection and absorption to study properties of organic or inorganic substances. The binocular head has the ability to tilt from 10° to 50° degrees. The “fluorescence microscope” refers to any microscope that uses fluorescence to generate an image, whether it is a more simple set up like an epifluorescence microscope, or a more complicated design such as a confocal microscope, which uses optical sectioning to get better resolution of the fluorescent image. Equipped with Chroma filters and a six position filter holder, there is a slot to add 3 more filter cubes and desired filters for your specific experiment or application. Intensity from a conventional lamp decreases through its life, which means that illumination varies dramatically over time. The lifetime of LED’s far exceeds that of these older lamps, ex. Mercury, Metal Halide, Xenon models and intensity remains broadly constant throughout its life providing a stable, repeatable light source. Some of the many fluorophores excited by the PE-300 Series are FITC, DAPI, Cy3, Auramine, TxRed, mCherry, TRITC, ChR, Hoechst, Cy5, Calcofluor, RFP to name a few.

The MT6300ECW Binocular Ergonomic Series employs Meiji Techno’s all new ICOS™ (Infinity Corrected Optical System) making the study of mounted specimens fast and easy while delivering an excellent cost-to- performance ratio. The MT6200ECW Series microscope are configured for Brightfield and Epi-fluorescence but can also be outfitted with optional phase contrast, polarized light and darkfield components. System modularity makes purchase and operation very affordable for colleges, universities, researchers and clinics.

The award-winning PE-300 Series is a range of LED Illumination Systems for Fluorescence Microscopy, Optogenetics, Electrophysiology and high-speed microscopy applications. It comprises 3 systems providing a solution that covers a range of everyday fluorescence microscopy; from the simple PE-300L/LEDTC or PE-300L/LEDMT (lite versions) through the classic PE-300W/LEDMT or PE-300W/LEDTC (white versions). The PE-300 Series offers:

   • High intensity at your microscope sample plane – view and image your samples brighter than ever
   • Adjustment of output in 1% steps on all systems – giving precise control whether imaging quickly or for a gentler approach to care for your samples.
   • Spectral coverage for all your everyday fluorophores: DAPI, CFP, Aqua, GFP, FITC, Tritc, TxRed, Cy5 and alike.

Features:

•Computer Aided Design Frame and Optics
•Ergonomically positioned controls
•Tilting Ergonomic Binocular Head 10° to 50° inclination
•Comfortable Siedentopf Viewing Heads to accommodate most Interpupillary Distances
•Quintuple turret DIN nosepiece with RMS threads
•Six Position Fluorescence Module with three Chroma Fluorochromes included :
•CHROMA - 19002 - AT-GFP/FITC - Basic Blue
•CHROMA - 19004 - AT-TRITC/Cy3 - Basic Green
•CHROMA - 3900 - AT-DAPI/Hoechst/AlexaFlour - Basic UV
•MA898 Empty filter cube available as an option to fit in the additional 3 empty filter cube spots for specialized Chroma filters
•Newly Designed Infinity Corrected Semi Apo Plan Fluorescence Objectives
•Brightfield, Darkfield, Phase Contrast, Polarized Light and Epi-Fluorescence modes
•LED Transmitted Koehler + PE-300/LEDMT CoolLed Epi Module Illumination
•LED products are more sustainable and energy efficient than conventional illuminators
•Mercury Free
•Energy Efficient: 80% less power
•Long lifetime (25,000 operating hours)
•No Bulb replacements
•Reduced risk of eye damage
•Quiet operation
•No special disposal regulations or issues
•Optional motorized stage and focus drive
•Optional Ergonomic Binocular or Trinocular Viewing Head available

Includes:
   • MT6300ECW: Ergonomic Trinocular Epi-Fluorescence/Brightfield Compound Microscope with Quintuple Nosepiece and PE-300W/LED MT CoolLED incident light source and LED transmitted illumination.
   • HD1500MET-AF: The HD1500MET-AF is our full featured 6 MP camera with a 1/2.8” CMOS chip. The HD1500MET-AF features a full HD (1080x1920) resolution, which provides high fidelity images with a refresh rate of 60fps (frams per second) when connected via HDMI or 30fps when connected via USB2.0, so there is absolutely no lag in the live video feed when moving your specimen or part.
   • MA151/35/03: C-mount adapter with 0.3X lens
   • MA879/05: CHROMA filter-AT-GFP/FITC longpass-19002 mounted in Meiji Filter cube, Exciter(EX) AT480/30x, Dichroic (BS)AT505DC, Emitter(EM)AT5151p (Factory Installed)
   • MA880/05: CHROMA filter-AT-TRITC/Cy3 Longpass-19004 mounted Meiji filter cube, Exciter (EX)AT540/25x, Dichroic (BS)AT565DC, Emitter(EM)575lp (Factory Installed)
   • MA881/05: CHROMA filter-AT-DAPI/Hoechst/AlexaFluor 350-3900 mounted in Meiji filter cube, Exciter (EX):AT375/28x, Dichroic (BS):AT415DC, Emitter (EM):AT460/50m (Factory Installed)
   • FLPWJ: D.C. Power Supply (This power supply is for the 100W Mercury lamp only)
   • MA860: ND25 Neutral Density filter, 29.8mm diameter
   • MT-RF47: UV Eye protection filter
   • PE-300W/LEDMT: LED fluorescence illumination kit, configured for fluorophores such as DAPI, FITC, TRITC & Cy5, adds greater control options to the platform, 3 channel control pod allows selection and control of excitation wavelength whether its to balance your FITC against your TRITC or to minimize bleaching by exciting only the markers that you are working. Supported by popular imaging software giving integrated control with your imaging set up time after time. An additional benefit of the PE-300W/LEDMT is that stains can be viewed either individually or in combination, without filter cube changes. This makes it ideal for use with multi-band filter sets as the screening process can be simplified when fewer filter cubes are used. Independent control for the three LED channels means that the user can control the level of excitation of each fluorescent stain independently on a multi-stained samples, potentially removing the need for single band filter sets altogether. Instant on/off with the ability to optimize intensity and minimize sample damage via the simple desktop Control Pod with a manual control pod and power supply.
(Included in MT6200CW & MT6200ECW & MT6300CW & MT6300ECW models)
          PE-300W/LEDMT features:
          - Remote control via USB or TTL trigger
          - Three LEDs
          - Simple to fit, simple to use: no alignment, a once only adjustment
          - Instant on/off - no shutters required, no warm up or cool down
          - Stable and repeatable - reliable and precise results
          - Precise intensity control in 1% steps (0-100%): no ND filters required
   • MA957: Ergonomic tilting Binocular head-Siedentopf type, Adjustable tilt from 10° to 50° degrees, Erect Image I.P. adjustment 53mm to 75mm, graduated diopter on left eyetube (30.0mm I.D. eyetube).
   • MA958: Photo/video attachment with sliding 80/20 beam-splitter. For use with video or digital cameras when MA957 ergonomic head is used (*Included in Ergonomic Model MT6300ECL & MT6300ECW).

   • MA817 (x 2): SWH10X Widefield high eyepoint eyepiece, Field No. 22, tube O.D. 30.0 mm


   • MA844: Plan Semi Apo Objective F10X, N.A.0.40, W.D.1.0 mm, F.N.24
   • MA845: Plan Semi Apo Objective F20X, N.A. O.65, W.D. 0.7 mm, F.N.24
   • MA846: Plan Semi Apo Objective F40X, N.A. 0.82, W.D. 0.15 mm, F.N.24  
   • MA848: Plan Semi Apo Objective F100X oil, N.A. 1.25, W.D.0.2mm, F.N.24

 


   • MA700: Immersion oil
   • MA910: Abbe condenser, N.A.1.25 with iris diaphragm and dove tail mount


   • MA856/05: LB100 Blue Clear filter, 44.0mm diameter, unmounted
   • MA918R: Ceramic coated flat-top stage, 190mm x 149mm, with 80mm x 52mm X-Y movement, with right hand drop down coaxial controls


   • MA598: Attachable finger assembly for MA918R and MA918L
   • MA326: 6V 30W Halogen lamp (Factory Installed)
   • MA327: 3 Amp Fuse for Halogen illuminator
   • BA005: HBO 100W Mercury lamp (2200 Lumens, life expectancy 200 hours)
   • MA809/10: Removable AC Electric cord with plug (115V)
   • MA906 (x 2): Rubber Eyeshield for MA817 SWH10X eyepiece (Factory installed)
   • MA714: Dust Cover for MT6000 Series
   • Manual: MT6000 Meiji Techno Instruction Manual
   • Warranty:Limited Lifetime Warranty Card

HD1500MET-AF Info:

Sensor CMOS
Sensor Size

1/2.8"

Dynamic Resolution 2MP, 1920x1080
Static Resolution 6MP, 3264 x 1836
Frame Rate

60fps @ HDMI

30fps @ USB 2.0

 Video Recording

30fps @ SD card

30fps @ USB2.0

Exposure Mode Auto/Manual
Exposure Time  0.001s-10s
 Output Interface USB2.0, SD Card, HDMI 
 Setting  Gamma, Gain, WDR, Noise Reductions
 White Balance  Auto/Manual
 Optical Port  Standard C-mount 
 Built-in Software Cloud 1.0 Ver 
 PC Software  Mosaic V2.0 
 Size 90.7mm x 78mm x 70.8mm 
Weight 452(g) or ~1.0lbs
Compatible OS Windows 7/8/10 (Real-time image stitching needs to run on a 64-bit system)

Includes:
   • HD1500MET-AF Camera
   • HDMI Cable
   • USB Cable
   • 12V AC/DC Power adapter
   • SD Card
   • Mouse
   • Application Metrics Software 
   • Packing Box

Built-in mouse control for autofocus and image measurement operations
software mouse


High-Speed Focusing Experience

The HD1500MET-AF offers both continuous and single shot autofocus models. It also support mouse wheel control for fine-tuning. Data transfer up to 60fps enable users to get clear images with ease. 

high-speed focus

Professional digital image measurement system

HD1500MET-AF provides extremely powerful measurement functionalities including, freehand line, rectangle, polygon, circle, bicircle, angle, point-line distance and much more. Three different length units of millimeter, centimeter, and micrometer are provided to meet various measurement requirements in different applications.
software

Revolutionary PC computing imaging software Mosaic v2.0

Fast, efficient and worry-free is the core design concept of Mosaic V2.0 software. It adopts a new image "shooting-processing-measurement-reporting" function, modular design, and integrates various intelligent image processing algorithms from Tucsen. It is dedicated to providing users with more simple operation modes and improve work efficiency in all circumstances

Custom function module

1. Autofocus and fine-tuning operations
2. Intelligent image capture and processing
3. Efficient measurement and attribute editing
4. Reports are automatically created and modified
software function

Real-time image stitching
It can generate large-sized mosaic images in a few seconds while moving the stage, which is light, smooth and worry-free!
bacteria

Real-time depth-of-field fusion
Turning the focus ring to capture different depth of field points while generating clear depth of field images, fast, accurate and efficient.
sample


Perfect color reproduction
Meiji Techno America’s color processing is capable of a new level of precision, matches the monitor image to the eyepiece view, produces extremely-high color definition.
bacteria2

Fastest USB2.0 camera with 30fps
With 30fps data transfer at an uncompressed resolution of 1920X1080, HD1500MET-AF sets a precedent. Make it one of the fastest USB2.0 camera in the world.
CHIP

Tailored 1080P HD screen
In order to let users better feel the excellent quality of the Meiji Techno America's cameras, we specially customized a 1080P high definition display screen - Retina Screen, which perfectly matches the performance of HD1500MET-AF camera.
camera

 

Model
Type
Version
Mega Pixels
Resolution
Frame Rate (FPS)
Sensor
C" Mount

HD1500T

HDMI/USB 2.0 Color 2-6MP 3264 x 1840 Static
1920 x 1080 Dynamic
60fps by HDMI
30fps by USB 2.0
1/2.8" CMOS 0.3X

HD1500TM
with 11.8" HDMI montior

HDMI/USB 2.0 Color 2-6MP

3264 x 1840 Static
1920 x 1080 Dynamic

60fps by HDMI
30fps by USB 2.0
1/2.8" CMOS 0.3X

HD1500MET

HDMI/USB 2.0 Color 2-6MP 3264 x 1840 Static
1920 x 1080 Dynamic
60fps by HDMI
30fps by USB 2.0
1/2.8" CMOS 0.3X

HD1500MET-M
with 11.8" HDMI montior

HDMI/USB 2.0 Color 2-6MP

3264 x 1840 Static
1920 x 1080 Dynamic

60fps by HDMI
30fps by USB 2.0
1/2.8" CMOS 0.3X

HD1500MET-AF
(Autofocus/Continuous 1-shot)

HDMI/USB2.0 Color 2-6MP

3264 x 1840 Static
1920 x 1080 Dynamic

60fps by HDMI
30fps by USB 2.0
1/2.8" CMOS 0.3X

HD1500MET-M-AF
(Autofocus/Continuous 1-shot/with 11.8" monitor)

HDMI/USB2.0 Color 2-6MP

3264 x 1840 Static
1920 x 1080 Dynamic

60fps by HDMI
30fps by USB 2.0
1/2.8" CMOS 0.3X

HD1000-LITE

HDMI/USB 2.0 Color 5MP

2592 x 1944

15fps by HDMI
15fps by USB 2.0

1/2.5" CMOS

0.3X

HD1000-LITE-M
with 11.8" HDMI montior

HDMI/USB 2.0 Color 5MP

2592 x 1944

15fps by HDMI
15fps by USB 2.0

1/2.5" CMOS

0.3X

HD1600T

USB 3.0 Color 16MP 4608 x 3456

25fps by USB 3.0

1/2.33" CMOS

0.3X

SS500-MC

Wifi Color 5MP 2912 x 1640 60fps by Wifi 1/2.3" CMOS 0.3X

WF300
Eyepiece Camera

Wifi Color 8MP 3200 x 2400 60fps by USB 2.0
30fps by Wifi
1/2.8" CMOS 20-43mm
Eyepiece Mount

WF200

Wifi Color 5MP 2592 x 1944 40fps by USB 2.0
15fps by Wifi
1/2.8" CMOS 0.3X

WF100
Document Scanner

Wifi Color 5MP 2592 x 1944 30fps by Wifi - -

X-1000U

USB 2.0 Color 5MP 2592 x 1911 10fps by USB 2.0 1/2.8" CMOS 0.3X

MIS-PL-DV24

USB 2.0 Color 2MP 1600 x 1200 30fps by USB 2.0 1/2" CMOS 0.5X

DK-LITE-B

USB 2.0 Color 1.5MP 1440 x 1080 10fps by USB 2.0 1/2.5" CMOS 0.5X

DK1000CB

USB 2.0 Color 2MP 1600 x 1200 15fps by USB 2.0 1/2" CMOS 0.5X

DK1000M

USB 2.0 Monochrome 1.3MP 1280 x 1024 30fps by USB 2.0 1/2" CMOS 0.5X

DK3000C

USB 2.0 Color 3.1MP 2048 x 1536 12fps by USB 2.0 1/2" CMOS 0.5X

DK5000C

USB 2.0 Color 5MP 2592 x 1944 5fps by USB 2.0 1/2.5" CMOS 0.7X

HD2000C

USB 2.0 Color 2MP 1920 x 1080 60fps by USB 2.0 1/3" CMOS 0.3X

ST1000C

USB 3.0 Color 5MP 2592 x 1944 60fps by USB 3.0 1/2.5" CMOS 0.5X

Product Information:
   • Manufactured: 100% MADE IN JAPAN / 100% MADE IN UK (CoolLED)
   • Warranty: LIMITED LIFETIME WARRANTY
   • Customer Support: 1-(800) 832-0060 (U.S.A Based)

MT6300ECW Package Information:
   • Weight: 39 lbs (17.6 kg)
   • Box Size: 16 x 14 x 21 inches
   • Footprint: 263mm (D) x 176mm (W)
   • Trinocular Ergonomic head type: 390 mm(D) x 533mm(H) x 210mm(W) (14Kg)(47 lbs.)

HD1500MET-AF Package Information:
   • 3lbs
   • 12 x 10 x 4 inches

Details

Epi-Fluorescent with LED:
Intensity from a conventional lamp decreases through its life, which means that illumination varies dramatically over time. The lifetime of LED’s far exceeds that of these older lamps, ex. Mercury, Metal Halide, Xenon models and intensity remains broadly constant throughout its life providing a stable, repeatable light source. Some of the many fluorophores excited by the PE-300 Series are FITC, DAPI, Cy3, Auramine, TxRed, mCherry, TRITC, ChR, Hoechst, Cy5, Calcofluor, RFP to name a few.

Note: First decide on the Microscope model that fits your requirement, Binocular or Trinocular, or Ergo-Binocular or Ergo-Trinocular model. Secondly decide on the proper Meiji Techno CoolLED illumination unit for your application. Simple to Choose: No alignment or adjustment needed once installed, already configured for your everyday fluorophores such as DAPI, FITC, TRITC &Cy5 and affordable through your lab consumables budget.

The PE-300W/LEDMT white is a compact and simple to use LED illumination unit. It provides a broad spectrum of illumination, covering the excitation bands of common fluorescent stains. Operation is by a remote manual control pod with instant on/off and intensity control from 0-100%. Remote control is available via USB or TTL trigger.

The PE-300W/LEDMT white now delivers DOUBLE the intensity at the microscope sample plane. It allows adjustment of output in 1% steps, giving precise control. The broad spectrum covers everyday fluorophores: DAPI, CFP, Aqua, FITC, TRITC, TxRed, Cy5 and many more. Simple to Fit: Direct fit means the CoolLED unit just attaches straight onto the microscope’s epi-fluoresence port in seconds which is optimized for light output for your microscope. Simple to Use: Instant On/Off with the ability to optimize intensity and minimize sample damage via the simple desktop Control Pod, really simple to fit and use immediately with less down time for set-up.

DAPI can be excited at either 365nm or 400nm and microscopes typically have a filter set which allows one or other of these wavelengths to be transmitted. To accommodate this, the pE-300white can be specified in one of two waveband configurations to match with the user’s existing filter sets within the microscope.

A microscope which is populated with a number of single band (“SB”) filter sets will typically have DAPI excitation at 365nm and a microscope with multi-band (“MB”) filter(s) has excitation at 400nm. The user can specify the configuration which is appropriate for their microscope.

Power requirements
100-240V a.c. 50/60Hz, 2A

Power consumption
Standby Max 2W
2018-2019 Meiji Techno America MT6000 LED Series Fluorescent Microscopes
113
1 band (GYR) at 100% intensity Max 20W
2 bands (BLU & GYR) at 100% intensity Max 38W
White (all 3 bands) at 100% intensity 46W

The PE-300L/LEDMT is a simple white light LED illumination system that offers intense, broadspectrum LED illumination for imaging most common fluorescent stains.

The PE-300L/LEDMT Light Source can be fitted directly to the microscope or specified with a liquid light guide. The system is a mercury-free alternative that is safer, more controllable, and repeatable than conventional high-pressure gas discharge illuminators. Spectral coverage is from the UV (DAPI excitation) to the Red region (Cy5 excitation). The system is perfect for hospital and regular research laboratory environments and is affordable within consumables budgets. 

DAPI can be excited at either 365nm or 400nm and microscopes typically have a filter set which allows one or other of these wavelengths to be transmitted. To accommodate this, the pE-300lite can be specified in one of two waveband configurations to match with the user’s existing filter sets within the microscope.

A microscope which is populated with a number of single band (“SB”) filter sets will typically have DAPI excitation at 365nm and a microscope with multi-band (“MB”) filter(s) has excitation at 400nm. The user can specify the configuration which is appropriate for their microscope.

Power requirements
100-240V a.c. 50/60Hz, 1.4A
Power consumption
2W (standby)
46W (full white intensity)

Microscope with Epi-Fluorescence is an optical microscope that uses fluorescence and phosphorescence instead of, or in addition to, reflection and absorption to study properties of organic or inorganic substances. The “fluorescence microscope” refers to any microscope that uses fluorescence to generate an image, whether it is a more simple set up like an epifluorescence microscope, or a more complicated design such as a confocal microscope, which uses optical sectioning to get better resolution of the fluorescent image. Equipped with Chroma filters and a six position filter holder, there is a slot to add 3 more filter cubes and desired filters for your specific experiment or application.

The MT6200CL, MT6200CW & MT6300CL, MT6300CW Series employs Meiji Techno’s all new ICOS™ (Infinity Corrected Optical System) making the study of mounted specimens fast and easy while delivering an excellent cost-to-performance ratio. The MT6200CL, MT6200CW & MT6300CL, MT6300CW Series microscopes are configured for brightfield and epi-flourescence but can also be outfitted with optional phase contrast, polarized light and darkfield components. System modularity makes purchase and operation very affordable for colleges, universities, researchers and clinics. 2018-2019 Meiji Techno America MT6000 LED Series Fluorescent Microscopes 114

Features:
• Computer Aided Design Frame and Optics
• Ergonomically positioned controls
• Comfortable Siedentopf Viewing Heads
• Quintuple turret DIN nosepiece
• Six Position Fluorescence Module with three Chroma Fluorochromes included :
• CHROMA - 19002 - AT-GFP/FITC - Basic Blue
• CHROMA - 19004 - AT-TRITC/Cy3 - Basic Green
• CHROMA - 3900 - AT-DAPI/Hoechst/AlexaFlour - Basic UV
• MA898 Empty filter cube available as an option to fit in the additional 3 empty filter cube
spots for specialized Chroma filters
• Newly Designed Semi Apo Plan Fluorescence Objectives
• Brightfield, Darkfield, Phase Contrast, Polarized Light and Epi-Fluorescence modes
• Reduced risk of eye damage
• Quiet operation
• No special disposal regulations or issues
• Optional motorized stage and focus drive
• Optional Ergonomic Binocular or Trinocular Viewing Head available
• LED Transmitted Koehler + CoolLed Epi Module
• LED products are more sustainable and energy efficient than conventional illuminators
• Mercury-free
• Energy Efficient: 80% less power
• Long lifetime (25,000 operating hours)
• No Bulb replacements
• Works with everyday fluorophores/stains
• Affordable through lab consumables budget
• Broad spectrum - covers UV (DAPI) to Red region (Cy5)
• Specify for existing single and multi-band filter sets – no need to buy new filters
• Instant on/off - No shutters required, no warm up or cool down
• Stable & repeatable – reliable and consistent results
• Precise intensity control in 1% steps (0-100%) – no ND filters required
• Excellent uniformity over field of view – fixed and stable, no alignment necessary

Model
Head
Illumination
Eyepieces
Objectives
Stage
Condenser

MT6200CL

Binocular
Incident PE-300L/LEDMT CoolLED + Transmitted Koehler LED
 
SWH10x FN22
Semi Plan Apo F10x, F20x, F40x, F100x
Fixed flat-top left or right-handed controls
Abbe NA 1.25 with iris in dovetail mount

MT6200ECL

Ergonomic Binocular

MT6300CL

Trinocular

MT6300ECL

Ergonomic Trinocular

MT6200CW

Binocular Incident PE-300W/LEDMT CoolLED + Transmitted Koehler LED

MT6200ECW

Ergonomic Binocular

MT6300CW

Trinocular

MT6300ECW

Ergonomic Trinocular

VIEWING HEADS
Model MA815 is the Siedentopf-type binocular head and MA816 is the trinocular head for camera integration. Each head has the eyetubes inclined at 30 degrees with the left eyetube having graduated diopter settings. The interpupillary distance is adjustable between 53mm - 75mm. An 80/20 beamsplitter for the trinocular tube can be engaged for photo-microscopy; 100% to eyetubes or 80% to phototube & 20% to the eyetube. The optional MA957, Ergonomic Binocular Viewing Head, has the inclination adjustable from 10 to 50 degrees to fit users of different heights. The Ergonomic Trinocular model comes with the MA958, photo/video attachment with sliding 80/20 beam-splitter (Included in MT6300EH).

EYEPIECES
10X Super Widefield High Eyepoint eyepieces F.N.22 are standard, and 15X and 20X eyepieces are also available as an option. A Super Widefield High Eyepoint 10X focusable eyepiece that accepts 25mm reticules is also available.

OBJECTIVE CHANGER
Quintuple nosepiece provides effortless objective changes with smooth-operating, ball bearing mounted.

OBJECTIVES
Meiji Techno offers an all new assortment of Infinity Corrected Semi Apochromat objectives for Fluorescence Microscopy and U.Plan Objectives for Brightfield/Darkfield, Phase and Polarized work

STAGE
Ceramic coated flat top stage measures 191mm x 126mm with 100mm x 100mm x-y travel. Ergonomically positioned left or right-handed coaxial drop down controls. Available with motorized components.

CONDENSER
Abbe condenser NA 1.25 with iris in dovetail mount is included. Optional condenders include a Zernike Phase Contrast Condenser NA 1.25 with iris in dovetail mount and darkfield condenser with dovetail mount.

ILLUMINATION
A powerful LED lamp provides enhanced image quality and brightness for the observation of specimens. The standard Modular Six Position Epi-fluorescent illuminator employs a PE-300W/LEDMT LED fluorescence illumination Kit, configured for fluorophores such as DAPI,FITC,TRITC & Cy5, Instant on/off with the ability to optimize intensity and minimize sample damage via the simple desktop Control Pod with a manual control pod and power supply (Included in MT6200CW & MT6200ECW & MT6300CW & MT6300ECW models)

PHOTOMICROGRAPHY
Meiji Techno offers a broad range of digital video cameras which offers excellent sensitivity, high resolution and a wide dynamic range for the most demanding brightfield and darkfield microscopy applications including clinical pathology and cytology, life sciences and geology. Some models has included software, that can preview and capture still shots and live videos to a PC or Mac with USB port or HDMI connectivity.

Details

Components & Accessories

BASIC FLUORESCENCE FILTER SETS INCLUDED IN ALL MODELS:
   • MA879/05: CHROMA filter-AT-GFP/FITC longpass-19002 mounted in Meiji Filter cube, Exciter(EX) AT480/30x, Dichroic (BS)AT505DC, Emitter(EM)AT5151p (Factory Installed)
   • MA880/05: CHROMA filter-AT-TRITC/Cy3 Longpass-19004 mounted Meiji filter cube, Exciter (EX)AT540/25x, Dichroic (BS)AT565DC, Emitter(EM)575lp (Factory Installed)
   • MA881/05: CHROMA filter-AT-DAPI/Hoechst/AlexaFluor 350-3900 mounted in Meiji filter cube, Exciter (EX):AT375/28x, Dichroic (BS):AT415DC, Emitter (EM):AT460/50m (Factory Installed)

The Basic Blue and Basic Green filter sets are designed primarily for viewing the fluorescence of a single fluorochrome. Both filters sets contain long pass emission filters which cannot exclude the fluorescence of a second fluorochrome which also maybe excited. NOTE: Additional filter sets may be purchased through Chroma Technology Corporation. An additional MA898 (empty replacement filter cube) will need to be ordered for the new filters. 1-800- 824-7662 www.chroma.com sales@chroma.com

OPTIONAL COMPONENTS & ACCESSORIES BELOW

Viewing Heads:
   • MA815: Binocular head - Siedentopf type, I.P. adjustment 53mm to 75mm, graduated diopter on left eyetube (30.0 mm I.D. eyetube). Inclined at 30 degrees Inverted Image (Included in Model MT6300H)
   •MA816: Trinocular head - Siedentopf type, I.P. adjustment 53mm to 75mm, graduated diopter on left eyetube (30.0 mm I.D. eyetube). Inclined at 30 degrees Inverted Image (Included in Model MT6300H)
   • MA957: Ergonomic tilting binocular head - Adjustable vertically from 10 to 50 degrees (30.0 mm I.D. eyetube) Erect image (Included in Ergonomic Model MT6200EH & MT6300EH)

Photo/Video Attachment:
   • MA958: Photo / video attachment with sliding 80/20 beam-splitter. For use with video or digital cameras when MA957/05 ergonomic head is used (Included in Ergonomic Model MT6300EH)

Eyepieces:
   • MA817: SWH 10X Widefield high eyepoint eyepiece, Field No. 22, tube O.D. 30.0 mm (each) (MA817 accepts optional 25mm diameter reticle) (included) (2 pieces)
   • MA818: SWH 15X Widefield high eyepoint eyepiece, Field No. 16.0, tube O.D. 30.0 mm (each) (19mm reticle mount)
   • MA819: SWH 20X Widefield high eyepoint eyepiece, Field No. 12.0, tube O.D. 30.0 mm (each) (19mm reticle mount)
   • MA859: SWH 10X-F Focusing eyepiece with reticle mount (without reticle), tube O.D. 30.0 mm (each) (25mm reticle mount)

Plan Semi Apochromat Objectives for Fluorescent Microscopy:
   • MA844: Plan Semi Apo Objective F10X, N.A. 0.40, W.D.1.0 mm, F.N. 24 (Included)
   • MA845: Plan Semi Apo Objective F20X, N.A. 0.65, W.D. 0.7 mm, F.N. 24 (Included)
   • MA846: Plan Semi Apo Objective F40X, N.A. 0.82, W.D. 0.15 mm, F.N. 24 (Included)
   • MA847: Plan Semi Apo Objective F40X oil, N.A. 0.85, W.D. 0.2 mm, F.N. 24, FL (Optional)
   • MA848: Plan Semi Apo Objective F100X, N.A. 1.25, W.D. 0.2 mm, F.N. 24, FL (Included)

Plan Apochromat Phase Objectives for Fluorescent Microscopy:
   • MA1012: Plan Apochromat Objective F4X, N.A. 0.13, W.D. 17.5 mm, F.N. 24
   • MA980: Plan Apochromat Objective F10X, N.A. 0.30, W.D. 8.6 mm, F.N. 24
   • MA981: Plan Apochromat Objective F20X, N.A. 0.65, W.D. 0.7 mm, F.N. 24
   • MA982: Plan Apochromat Objective F40X, N.A. 0.80, W.D. 0.2 mm, F.N. 24, FL
   • MA983: Plan Apochromat Objective F100X oil, N.A. 1.25, W.D. 0.2 mm, F.N. 24

Plan Semi Apochromat Objectives - Brightfield Objectives:
   • MA830: Plan Semi Apo Objective 2.5X, N.A. 0.07, W.D. 5.7mm, F.N. 24
   • MA831: Plan Semi Apo Objective 4X, N.A. 0.10, W.D. 17.8 mm, F.N. 24
   • MA832: Plan Semi Apo Objective 10X, N.A. 0.25, W.D. 10.7 mm, F.N .24
   • MA833: Plan Semi Apo Objective 20X, N.A. 0.40, W.D. 7.29 mm, F.N. 24
   • MA834: Plan Semi Apo Objective 40X, N.A. 0.65, W.D. 0.5 mm, F.N. 24
   • MA837: Plan Semi Apo Objective 100X oil, N.A.1.25, W.D. 0.23 mm, F.N. 24

Plan Semi Apochromat Objectives - Phase Objectives:
   • MA839: Plan Semi Apo Phase Objective 10X, N.A. 0.25, W.D. 10.7 mm, F.N. 24
   • MA840: Plan Semi Apo Phase Objective 20X, N.A. 0.40, W.D. 7.29 mm, F.N. 24
   • MA841: Plan Semi Apo Phase Objective 40X, N.A. 0.65, W.D. 0.5 mm, F.N. 24
   • MA842: Plan Semi Apo Plan Phase Objective 100X oil, N.A. 1.25, W.D. 0.23mm, F.N. 24

Zernike Phase Condenser:
   • MA913: Zernike Phase condenser with centerable phase annuli for 10X, 20X, 40X, 100X with brightfield position, dark-field stop for 40X objective, (Black-out position for epi-fluorescence on MT6000 Series only) with iris in dove tail mount (Included in Models MT5210L, MT5310L, MT5210H and MT5310H and Ergo models)

Other Zernike Components:
   • MA458/05: Centering Telescope, 30.0 mm O.D. (Included in Model MT5210L, MT5310L, MT5210H and Ergo models)
   • MA861/05: Green Interference filter (GIF), 44.0 mm diameter, unmounted (Included in MT5210L, MT5310L, MT5210H and MT5310H and Ergo models)

Darkfield Oil Immersion Objectives & Condenser System:
   • MA836: Plan Semi Apo Objective 50X, N.A. 0.87, oil with iris, W.D. 0.28, F.N. 24
   • MA838: Plan Semi Apo Objective 100X, N.A. 1.25, oil with iris, W.D. 0.23, F.N. 24
   • MA914: Darkfield condenser, N.A. 1.25, dove-tail mount (with ball bearing)

Filters for use with Transmitted Light:
   • MA858/05: ND 25 Neutral density filter, 44.0mm diameter, unmounted
   • MA856/05: LB100 Blue Clear filter 44.0mm diameter, unmounted
   • MA857/05: Green filter, clear, 44.0mm diameter, unmounted
   • MA861/05: Green Interference filter,(GIF) 44.0mm diameter, unmounted 
   • MA898: Empty filter cube for excitation filter set

Brightfield Condensers: 
   • MA910/10: Abbe condenser, N.A. 1.25, with centerable Phase annuli in slider for use with 20X and 40X Phase objectives, with iris diaphragm and dovetail mount
   • MA910/15: Abbe condenser, N.A. 1.25 with darkfield stop in slider for use with 20X and 40X brightfield objectives, with iris diaphragm and dovetail mount
   • MA911: Achromatic condenser, N.A. 1.25 with iris diaphragm and dovetail mount
   • MA976: Abbe condenser, N.A. 0.90 with swing out top lens, iris diaphragm and dovetail mount For use with low power scanning objective, MA830
   • MA1024: Aplanatic condenser, N.A. 1.40 with, iris diaphragm, an dovetail mount 790.00
For use with high magnification Apochromat objectives

Polarizer: 
   • MA915: Polarizer set for MT5000 Series microscopes

Stages
   • MA918R: Ceramic coated flat-top stage, 190mm x 149mm with 80mm x 52mm X-Y movement, and right hand drop-down coaxial controls
   • MA598: Attachable clinical finger assembly for MA918R and MA918L (Included)
   • MA676: Attachable clinical specimen holder for MA918R and MA918L (optional)

Eyepiece Micrometers (25mm diameter for the use with MA817 SWH 10x eyepiece)
   • MA523: Cross-line reticle, 25mm diameter
   • MA506: 10mm line divided into 100 units, 25mm diameter
   • MA509: 5mm line divided into 100 units, 25mm diameter
   • MA524: 10mm square divided into 400 parts, each square 0.5 mm, 25mm diameter
   • MA510: 10mm square divided into 100 parts, each square 1.0 mm, 25mm diameter
   • MA542: Cross-line reticle with 0.1mm graduations, 25mm diameter

Stage Micrometers
   • MA285: 1mm divided into 100 units, 0.01mm
   • MA286: 0.04” divided into 40 units, 0.001”
   • MA809/20: Removable AC Electric Cord with plug for 220v models (included in all 220v models)

Illuminators
   • PE300L/LEDMT: LED fluorescence illumination Kit, configured for fluorophores such as DAPI, FITC,TRITC & Cy5, Instant on/off with the ability to optimize intensity and minimize sample damage via the simple desktop Control Pod with a manual control pod and power supply ( Included in MT6200CL & MT6200ECL & MT6300CL & MT6300ECL models)
          PE-300L/LEDMT features:
          - Direct fit to the microscope in seconds
          - Broad spectrun - covers UV (DAPI) to Red region (Cy5)
          - No alignment, a once only adjustment
          - Instant on/off - no shutters required, no warm up or cool down
          - Stable and repeatable - reliable and precise results
          - Fine intensity control in 1% steps (0-100%) - no ND filters required
          - Excellent uniformity over field of view - fixed and stable, no alignment necessary
   • PE-300W/LEDMT: LED fluorescence illumination kit, configured for fluorophores such as DAPI fluorophores such as DAPI, FITC, TRITC & Cy5 , adds greater control options to the platform, 3 channel control pod allows selection and control of excitation wavelength whether it’s to balance your FITC against your TRITC or to minimize Bleaching by exciting only the markers you are working. Supported by popular imaging software giving integrated control with your imaging set up time after time. An additional benefit of the PE-300W/LEDMT is that stains can be viewed either individually or in combination, without filter cube changes. This makes it ideal for use with multi-band filter sets as the screening process can be simplified when fewer filter cubes are used. Independent control for the three LED channels means that the user can control the level of excitation of each Fluorescent stain independently on a multi-stained samples, potentially removing the need for single band filter sets altogether. Instant on/off with the ability to optimize intensity and minimize sample damage via the simple desktop Control Pod with a manual control pod and power supply (Included in MT6200CW & MT6200ECW & MT6300CW & MT6300ECW models)
          PE-300W/LEDMT features:
          - Remote control via USB or TTL trigger
          - Three LEDs
          - Simple to fit, simple to use: no alignment, a once only adjustment
          - Instant on/off - no shutters required, no warm up or cool down
          - Stable and repeatable - reliable and precise results
          - Precise intensity control in 1% steps (0-100%): no ND filters required

Replacement Bulbs & Fuses
   • MA809/10: Removable AC Electric cord with plug (included in all 115v models)
   • MA809/20: Removable AC Electric cord with plug for 220v models
   • BA005: HBO 100W Mercury lamp (2200 Lumens, Life expectancy 200 hours)

Power Cords
   • MA326: Spare bulb 6V 30W halogen lamp (Replacemnet bulb for transmitted light)
   • MA327: Spare 3A Fuse for Halogen illuminator

Carrying Case
   • MT-PEL: Pelican case with foam insert 21.5(L) X 16.5 (W) X 12.5 (D) for ML/MT/EM Models with portable pull out handle and wheels for protection againse vibration and shock

Miscellaneous
   • MA972: Centering target for Mercury bulb alignment (Similar to a stage micrometer but with concentric circles for aligning the image of the bulb arc)
   • MA996: Adapter to connect Prior Metal Arc Lamp to Meiji MT6000 - Prior Metal Halide power and light guide required
   • MA906: Eyeshield for MA817 SWH 10X eyepiece (each)
   • MA714: Dust cover for MT6000 (vinyl) (included)
   • MA700: Immersion Oil

 


Double click to read at full screen
Download Brochure (PDF)


 


Double click to read at full screen
Download Manual (PDF)


 


Double click to read at full screen
Download Manual (PDF)


 


Double click to read at full screen
Download Manual (PDF)


**SOFTWARE**
Download MosaicV2.0 (ZIP)


Download MAC Software CaptureV2.1.3 - 3/16/2020


 

Double click to read at full screen
Download HD1500MET-AF/HD1500MET-AF-M Brochure (PDF)