BAS-20SP Info:
20mm straight drop down post for FA-3 or BAS-2 stands 4" in length
Product Information:
• Manufactured: 100% MADE IN U.S.A
• Warranty: LIMITED LIFETIME WARRANTY
• Customer Support: 1-(800) 832-0060 (U.S.A Based)
Package Information:
• Weight: TBA
• Box Size: TBA
BAS-2 Features
• BAS-2 is a heavy duty dual ball bearing arm industrial-type boom stand comes with a 32mm diameter drop down mounting post to perfectly complement our EMZ (Zoom), EMT (Turret), EMF (Fixed) Series Stereo Microscope with the proper focus block
• BAS-2 uses linear ball bearings to support the horizontal arm, allowing it to glide over the work surface with none of the binding inherent in other boom stands
• 635mm (25”) vertical pole (Included)
• 457.2mm (18”) horizontal pole (Included)
• Minimal space requirement and greatest possible amount stability for EM Series stereo system up to 30lbs
• No loss of stability even at its furthest travel
• The BAS-2 can swing out of the way easily, clearing the workstation for other tasks
• Vertical column is used to compensate for taller specimen heights to accommodate the working distances of different microscope bodies
• Anti-rotation is stabilized by a locking pin on the vertical post
• Safety Collar for vertical and horizontal stability
• BAS-2 is equipped by a 80lb base
• Ergonomic flexibility, chemical resistant paint finish and corrosion resistant stainless steel columns make this boom stand an excellent choice in labs and production facilities
• High density rubber feet for vibration stability
• 100% MADE IN U.S.A
FA-3 Features
• Articulating Stand with table Clamp for Examination of Large Working Area
• 37", 939mm Reaching-out Length
• 16", 406mm High Stainless Steel Pillar
• 16 mm diameter bonder arm mounting pin (5/8”)
• Locking handles keep the Articulated stand in position
• Triple –Joint Articulating Design for Flexibility
• Accepts FS tilting coarse focusing holder with 84.2 mm round diameter opening(Optional)
• Accepts FSC tilting coarse and fine focusing holder with 84.2 mm round diameter opening (Optional)
• Accepts OS-SP20MM – 20mm drop down post for use with focus blocks with a 20mm mounting hole (optional)
Replacement Bulbs Listed by Part Number
NOTE: The size of these images will vary and some images have been re-sized to fit this page. Do not rely on the size of these images to determine which bulb you need.
NOTE: Incident light shines down from above; transmitted light shines up through the specimen from below.
| MA111 | MA260/05 | MA261/SL-10 | MA263/05 MA263/10 | MA264/05 | MA275/05 |
| Part Number | Description | Application |
| MA111 | 12V 10W | Incident light:ST-3, SKT-1B, SKT-2B, SKT-3B, GS2000 Incident & transmitted light: SKT-BT, SKT-2BT, SKT-3BT Transmitted light: STC-3 |
| MA260/05 | 6V 20W Halogen | For MA260, MA264H, and MA264EX illuminators |
| MA261/SL-10 | 115V 20W |
For "B" Stand and MA261/35 (TM200 Series illuminator)
|
| MA263/05 |
115V 30W
|
For MA263 illuminators
|
| MA263/10 | 220/240V 30W | For MA263 illuminators |
| MA264/05 | 6.5V 2.75A | For MA264 illuminators |
| MA275/05 | 12V 50W | For ML5000 Series 50W models; ML7500, ML8500 All MT7500, MT8500 series |
| MA305/05 | MA309/05 | MA326 | MA350/10 MA350/20 | MA361/10 MA362/10 |
| Part Number | Description | Application |
| MA305/05 | 8W Ring Fluorescent | For MA305/100, MA305/200 ring fluorescent illuminators |
| MA309/05 | 4W Tube Fluorescent | For MA309 fluorescent box illuminators for GEM stand |
| MA326 | 6V 30W Halogen (G4 base type) |
For ML2000 and ML5000 Series 30W models; all VT Series Models, IM7100, IM7200, ML2000, ML7000, ML8000, ML9000, TC5100, TC5200, TC5300, TC5400, TC5500, TC5600
All MT Series 30W models; all RZT & RZDT Stands |
| MA350/10 |
115V 30W
|
For GEM stand transmitted light
|
| MA350/20 | 220/240V 30W | For GEM stand transmitted light |
| MA361/10* | 110V 20W | Half-silvered bulb for TM400 Series 20W models (DISCONTINUED) |
| MA361/20* | 220/240V 20W | Half-silvered bulb for TM400 Series 20W models |
| MA362/10* | 115V 30W | Half-silvered bulb for TM400 Series 30W models (DISCONTINUED) |
| MA362/20* | 220/240V 30W | Half-silvered bulb for TM400 Series 30W models(DISCONTINUED) |
| MA560 | MA561 | MA570 | FL180/70 FL150/70 | MA357 | MA358 | MA590 |
| Part Number | Description | Application |
| MA560 | 6V 1.2A Tungsten | Incident light: AB, ABZ, PB Stands All BM/BMK Series models |
| MA561 | 6V 1.2A Tungsten |
Transmitted light: AB, ABZ, PB Stands Note: MA560 and MA561 may appear to be identical, but they are not interchangeable. |
| MA570 | 6V 10W Halogen |
Incident & transmitted light: ABE, ABH, ABZH, PBH Stands
|
| FL150/70 |
21V 150W Halogen
|
For Fiber Optic Light sources: All FT190 and FL150 Series
|
| FL180/70 | 21V 150W Halogen | For FL180, FL181 & FL182 fiber optic illuminators |
| MA357 | 8V 12W Tungsten | Frosted - Fits Meiji Techno MT5500 Series Microscopes |
| MA358 | 8V 12W Tungsten | Clear - Fits Meiji Techno MT5500 Series Microscopes |
| MA590 | 110V 15W Tungsten | Frosted - Fits Meiji Techno PBM Series Stands |
DC Arc Lamps
| Part Number | Description | Application |
| BA005 | HBO 100W Mercury DC Arc Lamp | TC5000 Series & MT6000 Series Equipped with Epi-Fluorescence Lamphouses |
| BA013 | XBO 75W Xenon DC Arc Lamp | |
| BA014 | XBO 100W Xenon DC Arc Lamp |
BA005 Information:
Brand: Ushio
Technology: Short-Arc Mercury
Useful Life Hours: 200
Lumen Output: 2200
Actual Wattage: 100
Voltage: 20
Base Type: SFa7.5+SFa9
Length (Inch): 3.54
Diameter (Inch): .394
Manufacturers Notes: The HBO 100W BA005 is a Mercury Arc 20V 100 W Lamp with a SFa7.5-2 base
This product is also a direct replacement for the following items:
*Discontinued - subject to stock on hand
Click HERE for more Bulb info.
Light bulbs in microscope illuminators need to be replaced periodically. The bulbs on this page are most commonly used in Meiji Techno illumination systems. If you own a Meiji microscope and need a replacement, you should be able to purchase it at your local Meiji Dealer. Some older models or specialized microscopes may use bulbs that are not listed here. If you cannot find the correct bulb, please contact our technical support staff to assist you. Click HERE for information on Lamp Safety, Handling and Disposal.
Tips on extending bulb life
Bulbs have a rough life in a microscope: burning in an enclosed area for hours on end with a finite lifetime, the effects of too much heat and not enough ventilation, DC current from the dimmer circuit slowly thinning the metal of the filament. And with bulbs nowadays being manufactured more and more cheaply, the cumulative effect is not good for bulb longevity.
If the bulb is halogen or DC Arc Lamp type, DO NOT TOUCH THE GLASS with your bare hands when installing bulbs. Use the plastic bag it comes in to install the bulb. DO NOT jar or bump or run your scope in an environment that has excessive vibration. Turn your scope off if you do not need it on. Some bulbs have a rated life of only 100 - 200 hours so if you use your scope full time, be prepared to use bulbs.
Halogen bulbs in microscopes and fiber optic light sources can also have problems if the socket is worn out; i.e. the connection cannot sink enough heat away from the bulb and/or the electrical connection is weak. If your scope is an old workhorse who's starting to eat bulbs, check the bulb socket out for poor contact and discoloration of the contact. The bi-pin type bulb should push stiffly into the socket. If not, or if it wobbles around excessively, the socket is too old and needs replacement.
BAS Stand Series and Accessories
• BAS-1: Ball bearing stand with dual horizontal arms, 13" x 13" x 1.5" base, 25" vertical post, safety clamp, 32mm straight mounting post
• BAS-32SP: Replacement 32mm straight mounting post for BAS-1 (For use with RZ Series)
• BAS-38SP: Replacement 38mm (1.5") diameter, straight drop post with 5/8" mounting pin
• BAS-32TP: Replacement tilting 32mm mounting post with 5/8" mounting pin
• BAS-2: Ball bearing stand with dual horizontal arms, adjustable from 5.5" to 18", 13" x 13" x 1.5" base, 25" vertical post, safety clamp and 20mm straight mounting post for MS-51/05 or MS-53/05 holder (Note: Socket Head cap screw for base: 1/2" x 2" 13TP)
• BAS-3: Ball bearing stand with dual horizontal arms, 13" x 13" x 1.5" base, 25" vertical post, safety clamp for MS-52/05 or MS-54/05 holder
• BAS-20SP: 20mm straight drop down post for FA-3 or BAS-2 stand 4" in length
Double click to read at full screen
Download Brochure (PDF)
Double click to read at full screen
Download Manual (PDF)
