How to Assemble the Swivel Kit on a Gem Stand |
|
|
||
 |
The swivel
kit includes:
4 plastic
washers
4 metal
washers
Bottom cover
plate with 4 (3mm x 12mm) screws
Rotatable
ring with 4 (4mm x 10mm) screws
|
|
    |
Unscrew and
remove the rubber feet of the stand.
|
|
 |
With the
stand upside down and level, position
the plastic washers over the screw
holes.
|
|
  |
Screw the
cover plate onto the bottom using the
3mm x 12mm screws.
|
|
 |
Position the
4 metal washers over the 4 inner screw
holes of the cover plate.
|
|
 |
With the
metal washers in place, screw the
rotatable ring onto the bottom cover
with the 4mm x 10mm screws. The ring
should be flush with the washers.
|
|
   |
The
installation is complete.
|
|
|
Home | Contact Us | Choosing a Microscope | Accessories | Literature | Service | Warranty
|
||