HD-UWF Includes:
- HD-UWF WiFi camera Eyepiece
- Hexagon Key
- USB Power adaptor
- Installation disk (KoPa)
| Physical Pixel | 8.0MP |
| Sensor Model | Sony IMX334 CMOS |
| Exposure Mode | Roller shutter exposure |
| Highest resolution | 3480x2160 (8,294,400) |
| Sensor Size | 1/1.8" |
| Pixel Size | 2.0μm×2.0μm |
| Dynamic Range | 72dB |
| SNR | ≥56dB |
| Spectral response | 380-650nm |
| Exposure | 3.9ms - 320ms, Automatic and manual |
| White balance | Real-time auto, single auto, manual adjustment |
| Preview resolution |
USB mode: WiFi mode: |
| Record format |
Snapshot Format: JPG, BMP, PNG, TIFF, PDF |
| Power consumption | USB: DC 5.0V 500mA WiFi: DC 5.0V 1500mA |
| Supporting protocol | 5G WiFi iEEE 802.11ac |
| Working frequency range | 5.180-5.825GHz |
| Computer OS | Windows, Android, iOS |
| PC software | KoPa Capture |
| APP software | Capture KoPa WiFi Lab |
|
Product size (L×D×H mm) |
180×100×165 |
|
Box size (L×D×H mm) |
250×155×90 |
|
Net weight/unit (g) |
1037 |
System Requirements under USB Work Mode
• Windows 7 (64 bits), Windows (64 bits), Windows 8.1 (64 bits), Windows 10 (64 bits)
• Dual core 3GHz or higher CPU
• USB 2.0 high-speed interface or USB2.0 compatible interface
• At least 10 GB available hard-disk space
• 8G or more memory
• DVD-ROM driver (only needed when installing software)
System Requirements under WiFi Work Mode
• 5.0 or above version for Android system.
• 8.0 or above version for IOS system.
• Wireless network hardware must support the 802.11n/ac protocol (5G mode).
HD-UWF is Meji Techno's newest WiFi camera that is used for our Meiji Techno compound microscopes. This WiFi camera has a highest resolution of 3840 x 2160 by USB and Wifi. It also has a sensor size of 1/1/8" and a pixel size of 2.0μm×2.0μm. The HD-UWF features a built in high-power reduction lens for larger field of viewing. It also is capable of accurate and simple focusing with a screw rod in the back for parfocaling. This camera can be connected to a PC monitor via WiFi or USB directly. It is also compatible with Windows, iOS and Android.
WiFi Camera Eyepiece Assembly
Assembly with Biological Microscope
1. Separate eyepiece part from objective part as shown in figure 1
1) Loosen the fixing screw of the microscope.
2) Remove the eyepiece part of the microscope.
2. Assembly the inWiFi Camera Eyepiece as shown in figure 2
1) Place the inWiFi Camera Eyepiece on the top of the microscope objective.
2) Tighten the fastening screw.
3. Assemble eyepiece part of the microscope as shown in figure 3
1) Place the eyepiece part of the microscope to the female interface of the inWiFi Camera Eyepiece.
2) Tighten the fastening screw.
4. Connect the intergrated camera to the USB port of a computer, run the software and start using it.
Disassembly the inWiFi Camera Eyepiece
1. Reverse the assembly sequence from the previous tutorial (above)
