MT9930L-HD1500MET-M/0.3 40X - 400X LED Trinocular Polarizing Microscope and HD Camera (HD1500MET-M)

Includes:
   • MT9930L: Trinocular MT9930L Series LED Incident and LED Transmitted Polarizing Microscope is an investigative tool for isotropic and anistropic materials. Focusable Bertrand lens, Rotatable Analyzer with 180° graduations. Newly designed Strain free Abbe Condenser 1.25 N.A. with a swing out top lens and built in iris in a dovetail mount is easy to change and operates and tracks very smoothly and predictably facilitating accurate iris control with improved usability. Newly improved ∞ Infinity Corrected Objectives ICOS Optical System.  Ceramic coated, 175mm diameter, ball bearing, circular rotating stage graduated 360°, with 1°increments and vernier reading to 0.1°. Polarizer in a swing in-out click/clamp mount, fully rotatable 360° with click stop at 0°and 90°.
   • HD1500MET-M: The HD1500MET-M is our full featured 6 MP camera with a 1/3” CMOS chip.  A 0.3X C” mount adapter (MA151/35/03) is needed to attach it to any standard Meiji Techno America Trinocular Microscope.  The HD1500MET-M features a full HD (1080x1920) resolution, which provides high fidelity images with a refresh rate of 60fps- frames per second when connected via HDMI, so there is absolutely no lag in the live video feed when moving your specimen or part. Included with the 11.8” High Definition display is a mounting kit that allows the display to be mounted directly in front of the HD1500MET-M.
   • MA151/35/03: C-mount adapter with 0.3X lens
   • MA953: Trinocular head - Siedentopf type, inclined at 30 degrees with reticle angle  compensation, I.P. adjustment 53mm to 75mm, graduated diopter on left eyetube (23.2.0 mm I.D. eyetube) (*Included in model MT9930 & MT9930L)

   • MA407CP: Super Widefield compensating KHW10X, focusing eyepiece with cross-line and guide pin, F.N. 20 are standard with 21mm reticle mount
   • MA407: KHW-10X Compensating eyepiece, F.N. 20 (each) (Tube O.D. 23.2mm) (qty#1)

   • MA935: Strain free Plan objective 4X/N.A.0.10, W.D. 25.89mm, ∞ Infinity Corrected
   • MA936: Strain free Plan objective 10X/N.A.0.25, W.D. 7.3mm, ∞ Infinity Corrected  
   • MA938: Strain free Plan objective 40XS/N.A.0.65, W.D. 0.50mm, ∞ Infinity Corrected

   • MA976/05: Strain free Abbe condenser with swing out top lens, N.A. 0.90 with iris diaphragm and dovetail mount

   • Stage: Rotatable stage with Vernier graduation 360° with Vernier, reading to 1°, 150mm diameter with stainless steel stage clips (Factory Installed)

   • MA946: Stainless steel Stage Clips (qty#2)
   • MA988: CombinationFirst order red compensating plate and 1/4 Wave-length test plate and Brightfield spot, for use with MT9920 and MT9930 (20mm X 6mm X 142mm)
   • MA956/05: Rotatable analyzer with 180 degree graduations (34mm x 6mm x 156mm)
   • MA955: Vertical illuminator attachment, 6V 30W halogen Koehler (Included in MT9920 and MT9930 Series)
   • MA927/05: Table-top transformer with automatic voltage sensing power supply for use with MA955 vertical illuminator (Input voltage 100V-240V) (Included with MT9920 and MT9930 Series)
   • MA289/05: Blue clear filter, 29.8mm diameter unmounted, for transmitted light (Included in Halogen models)
   • MA679: Polarizing filter in metal mount (For use with incident illuminator, fits 25mm filter slot)
   • Polarizer: Swing in-out click/clamp mount, fully rotatable 360° with click stop at 0°and 90° (Included in MT9920 and MT9930 series) (Factory Installed)
   • MA955LED: Vertical Koehler illuminator attachment, LED (Included in MT9920L & MT9930L) 
   • MA927/05LED: Table-top transformer with automatic voltage sensing power supply for use with  MA955LED 

   • MA809/10: Removable AC Electric cord with plug for 115V models (*Included in all 115V models) or
   • MA809/20: Removable AC Electric cord with plug for 220V models (*Included in all 220V models)
   • MA494/PT#1: Nosepieces centering screws (each) (qty# 2)
   • MA711: Dust cover for MT9900 Series (Included in all models)
   • MA905: Interference Color Chart Laminated Sheet
   • Warranty: Limited Lifetime Warranty Card 

HD1500MET-M Includes:
   • HD1500MET-M Camera
   • 11.8in HDMI Monitor
   • HDMI Cable
   • USB Cable
   • 12V AC/DC Power adapter
   • SD Card
   • Retina Screen
   • Mouse
   • "L" Bracket Adapter for Monitor to Camera connectivity
   • Application Metrics Software ISCapture
   • Packing Box

MULTIFORM MEASUREMENT TOOLS 
The HD1500MET-M provides extremely powerful measurement functionality including: freehand lines, rectangles, polygons, circles, bicircles, angles, point-line distance and much more. In addition to the ability to measure point-line distance, angles, the length of curves and lines, the camera can measure the perimeter & area of enclosed features such as: rectangles, polygons, and circles. The unique calibration and magnification functions coupled with the ability to export the results to Excel or text files, make the measurements more convenient and simple.

MICRON LEVEL MEASUREMENT ACCURACY 
The HD1500MET-M is capable of delivering measurements with a resolution of 10 nanometers which provides an incredible metrology capability in the most demanding situations.

MEASUREMENT FOR VARIOUS APPLICATIONS
In addition µm, the HD1500MET-M also provides calibrations in mm and cm, which will meet various measurement requirements in different applications. And these results provide objective and reliable data to support quantitative analysis.

CONVENIENT MEASUREMENT DATA MANAGEMENT
Two measurement results exporting modes (Excel and text) make the measurement data management more convenient.

30FPS HIGH SPEED LIVE IMAGE
With 30fps data transfer at an uncompressed resolution of 1920X1080, sets a precedent. It is one of the fastest USB2.0 cameras in the world.

EXCELLENT CAPABILITY FOR FLUORESCENCE
Taking advantage of the ultra high signal to noise ratio sensor, the HD1500MET-M provides for up to 10 seconds exposure time and gets finest detailed images, even for low light fluorescence.

3D NOISE REDUCTION
Longer exposure times increase the image noise. But the integrated 3D noise reduction function keeps the image always clean and sharp.

1080P VIDEO RECORDING
Just click the button to start recording 1080P videos at 30fps. The recorded video files will be saved to the high speed SD card. It is also possible to play back the videos from the SD card directly.

SUPERB SMART CAMERA
It automatically analyzes the acquired images, optimizes the white balance, exposure time and saturation to present perfect images. Whatever, for bright field or dark field applications, ideal images can be captured, barely needing any parameter adjustments.

SIMPLE OPERATIONS
The embedded user interface is so simple that not even one mouse click is required to bring up the two simple menus. There are only two icons on the splash, one for capture, the for settings.

Frequently Asked Questions

Q: Start the software and get the camera recognized, but the preview is all black.
A: Check whether the anti-dust cap on the C-mount is removed. If already removed and attach the camera to the microscop, check whether the lighting path toggle switch to the camera. Then try to extend the exposure time and gain to get brighter images.

Q: The imaging scene from the eyepiece is in focus but the live images from the camera are still out of focus.
A: This is because the camera and the eyepiece are in different focal planes. Can consider to use adjustable adapter to connect camera to the microscope trinocular, and the adjust the adapter to make the live image in focus.

Q: There are some shadows on the image and the shadows always stay in the same position even when the sample is moved.
A: Possible reasons:
1. The anti-dust film on the camera C-mount is not removed. Remove the anti-dust film
2. Check to see if there is any dirt on the objective. Clean the objective.
3. Some dust on the surface of the camera IR filter. Clean the camera optical port.

Q: Camera frame rate is extremely slow.
A: Possible reasons:
1. Preview resolution is too high. Try lowering the resolution and check the change of the frame rate.
2. Exposure time is too long. If need exposure time longer than 200ms, try to use higher gain to get brighter images.
3. Computer issue. Computer is very old or the motherboard chipset is Intel 8 Series/C220 series.

Q: Start the software and get the error message: can not recognize the camera or No camera.
A: Possible reasons:
1. The camera USB cable is not well connected. Reconnect the camera again.
2. Check whether the camera is connect to the USB port on the front of the mainframe. If so, then connect it to the USB port on the back of the mainframe. The USB ports on the front of the mainframe are the extended ports from the motherboard which can not provide stable voltage and current for cameras.
3. The camera itself needs extra power supply but does not switch on the power. TrueChrome is required to switch on power, attach to the PC and then restart the software. TCC-6.1ICE is required to plug in power to be recognized by PC.
4. The camera driver is not installed or failed to install. Go to the "Device Manager" > "Imaging Devices" and check whether the camera is listed WITH YELLOW FLAG. Then re-install the driver again. If still fail to install to driver, please contact camera technical support for help.

Q: Image Field of View (FOV) is much smaller than the scene can be seen from the eyepieces.
A: Possible reasons:
The camera sensor size is not 1 inch. It needs reduce lens to get bigger FOV.
Low resolution is used to preview. Set full resolutionion.
The reduce lens does not match the camera sensor size.

Q: When push “Capture” button, sometimes the saved images are quite blurry.
A: It could be because some slight vibration happens on the camera during capturing the images.

Q: Security shield on ISCapture shortcut.
A: Some anti-virus or firewall softwaree installed in the PCs will identify the DLL files from ISCapture as virus and automatically isolate or delete the ISCapture software files. If have the warning message to delete or isolate the DLL files during the ISCapture installation, please ignore the warning message or set the ISCapture as trusted software. Otherwise, the ISCapture can not be used normally.

Q: Newer version software con not recognize the old cameras.
A: Currently, all the newer version software ISCapture is compatible with the previous version cameras EXCEPT TCA Series.

Q: After doing the measurement on the live images, the captured image is without any measurement data.
A: To save the live measurement on captured images, check the “Combined Measurements” checkbox in the File Save tab and then capture images. While doing the still image measurements, only click the Save or Save As on the right hand side shortcut to save the data on the images.

Q: The live images and the captures images color is quite different from the one we can see from the eyepieces.
A: Because of the different lighting source, White Balance is needed to correct the image color.

Q: How to do quick White Balance?
A: White Balance while attached to camera to stereo microscope: Use a white paper to replace the sample. Click on “White Balance” to correct the image color > Remove the white paper and put back the sample.
White Balance while attach the camera to the biological microscope: Move the sample slide to the blank area. Click on “White Balance” and move back the sample.

Q: After install ISCapture and firstly start the software, but get the error “The program can’t start because MSVCP100.dll is missing from your computer. Try reinstalling the program to fix this problem.”

A; This is because the operating system lack of some Visual C++ 32bit library files which the ISCapture needs to call them. Without these files, the software can not be started normally. Install the patch VCredist_x86.exe (can be found in the CD that comes with the camera or go to http://www.microsoft.com/en-us/download/details.aspx?id=5555

Q: Start the ISCapture but get the error “Unable to execute file C:\Program Files\ISCapture\ISCapture.exe CreateProcess failed; code 740.

A: Completely remove the ISC Capture, reboot the PC and then right click on ISCapture installer (ISCapture Setup.exe) and select “Run as Administrator” to install the ISCapture. When you first start the software right click on the ISC icon and select “Run as Administrator” to start it.

Q:When start ISCapture, get error message “Cannot find the USB Key!”

A: The software is encrypted. Specific USB key is needed to attach to the computer port first.

Q:After capturing several images, it takes more and more time to save a frame image. Sometimes it is even up to more than 30 seconds, and then finally the software hang or crash.
A: If the image save directory is the network driver, during uploading the files to network driver, it will significantly increase the COP usage. When the CUP usage is up to 100%, the software will hang or crash. Recommend to change the file save directory to the computer hard disk.

Q: Whether can share the calibration files on different PCs?
A: If using the ISCapture earlier version than V4.0: Go to the folder “Application Data/ISCapture” in system disk, find the file “calibrationTable.ini” and copy it to another PC under the same directory. (The “Application Data” folder is a hidden folder, you might need to make the system invisible visible first.)
If it is ISCapture V4.0 or later, go to the Parameter tab and click “Backup” to backup the parameter settings and copy them to another PC to restore them.

Q:After install the ISCapture and every time I run the software i get the error:

A: This is because some program in the user’s PC is using the library file ‘libiomp5md.dll’which will conflict with the ISCapture. So far as we know, the software GoPro Studio will conflict with ISCapture. To solve this issue, please try to remove the libiomp5md.dll from the C:\Windows\System32 folder while using the ISCapture.

Q: Shortcut keys for ISCapture to capture still images and videos:
A: With ISCapture V3.6.6 or later, running the ISCapture first, Press F9 key on the keyboard to capture images. Press F10 to start the video recording. If in manual recording mode, press F11 to stop the recording.

Q: On preview images, lots of horizontal lines appear.

A: This is because of the lighting frequency. Extend exposure time or turn off the filament lamp or fluorescent lamp in the environment to solve this issue.

Q:Recording issue when connected to the HD1500T/HD1000 Series to the monitor and recorded video directly to the SD card? If so, do you know what the capacity of the SD card the user used during recording the videos?
A:When recording videos to the SD card, the camera only supports the SD card with format SDHC. It can not work with the SD card format SDXC. And max. capacity of the SDHC format SD card is 32GB which means the SD card with capacity >= 64GB, is format SDXC.
If already use SDHC format SD card, please help to confirm the information below:
1). Whether the customer used the SD card came with the HD1500T/HD1000 camera?
2). If not, what exactly the model of the SD card the customer used? Maybe some picture of the SD card.

If got the issue while connect the camera to the computer, I need to confirm below information:
1). The software always stop recording AUTOMATICALLY after 5-10 minutes?
2). Whether the software or the computer freeze if MANUALLY stop the recording?

Product Information: 
   • Manufactured: 100% MADE IN JAPAN
   • Warranty: LIMITED LIFETIME WARRANTY 
   • Customer Support: 1-(800) 832-0060 (U.S.A Based)

MT9930L Package Information: 
   • Weight: 33lbs (9.06kg)
   • Box Size: 28 x 16 x 13 inches 
   • Footprint: 263mm (D) x 176mm (W)
   • Binocular head type: 297 mm(D) x 504mm (H) x 212mm(W) (11.4kg)( 41.33 lbs.)
   • Trinocular head type: 297 mm(D) x 558mm(H) x 212mm(W) (12.2Kg)(44.0 lbs.)

HD1500MET-M Package Information:
   • 5lbs
   • 12 x 10 x 4 inches

The MT9900 Series features include:

• Focusable Bertrand lens ( Factory installed)
• Rotatable Analyzer with 180° graduations
• Combination First order red compensating plate and ¼ Wave-length test plate and Brightfield spot with a slider locking pin standard in all models.
• Newly designed Strain free Abbe Condenser 1.25 N.A. with a swing out top lens and built in iris in a dovetail mount is easy to change and operates and tracks very smoothly and predictably facilitating accurate iris control with improved usability
• Polarizer in a Swing in-out click/clamp mount, fully rotatable 360° with click stop at 0°and 90°
• Super Widefield compensating KHW10X, focusing eyepiece with cross-line and guide pin, F.N. 20 are standard with 21mm reticle mount
• Ergonomic Siedentopf type binocular or Trinocular viewing heads are standard
• Smooth operating ball bearing centerable nosepiece provides effortless objective changes
• Clear Observation Images with Newly improved ∞ Infinity Corrected Objectives ICOS Optical System
• Available accessories suited for high-level Polarization Observation
• Intermediate tube with built in analyzer and compensator slot and rotatable polarizer in a swing-out mount
• Ceramic coated, 175mm diameter, ball bearing, circular rotating stage graduated 360°, with 1°increments and vernier reading to 0.1°. Stage equipped with easy to maintain ceramic coating allows for smooth exchange of specimens while offering maximum protection to the stage surface from abrasions and wear overtime of use.  The super hard coating is durable and rugged enough to provide years of demanding use.
• Focus  tension adjustment and safety Auto-focus stage stop lever
• Choice of Bright Lambertian designed LED illumination or 30 watt Koehler Halogen illumination allowing observation of clear images of polarization with automatic voltage sensing power supply 110V-240V.
• Trinocular models compatible with Digital, CCD, CMOS, Analog Meiji Techno adapters for photomicrography
• Cast Aluminum Alloy construction with chemical resistant finish
• Triangular designed frame for maximum ergonomics, greatly lessens user fatigue during hours of extended observation

Brightfield:
The simplest of all the optical microscopy illumination techniques. Sample illumination is incident (i.e. illumination from above and observed from above) or transmitted (i.e., illuminated from below and observed from above) white light and contrast in the sample is caused by absorbance of some of the transmitted light in dense areas of the sample. Brightfield microscopy is the simplest of a range of techniques used for illumination of samples in light microscopes and its simplicity makes it a popular technique. The typical appearance of a brightfield microscopy image is a dark sample on a bright background.

Polarizing Light:
A type of optical microscopy techniques involving polarized light. Simple techniques include illumination of the sample with polarized light. Directly transmitted light can, optionally, be blocked with a polarizer orientated at 90° degrees to the illumination. More complex microscopy techniques which take advantage of polarized light include differential interference contrast microscopy and interference reflection microscopy.

The MT9920 & MT9930 Series Incident and Transmitted Polarizing Microscope is an investigative tool for isotropic and anistropic materials. This series is the most suited in generating interference figures and in mineralogy in the scientific study of crystal structure and physical (including optical) properties of minerals. Specific studies include process of mineral origin and formation, classification of minerals, their geographic distribution as well as their utilization. Ergonomic placement of controls allows for stress free operation, increased lab efficiency and maximum productivity. Incident and Transmitted 6V 30W Koehler Halogen illuminator or LED Koehler illuminator with newly engineered high performance optics strain free ? Infinity Corrected objectives reduce internal strain to an absolute minimum. Our redesigned polarizing condensers with a swing out top lens helps maximize the field of view with lower power objectives to enhance performance in polarized light, yielding unmatched image contrast, provide exceptionally bright, crisp images with good color rendition and superior flat fields of view. Intermediate tube with a built in focusable Bertrand lens and a rotatable Analyzer greatly increases the quality of the image along with a compensator slot and rotatable polarizer with full wave plate.

The MT9920 & MT9930 Series microscopes are used in research, industry and training in many scientific fields such as:
• Environmental Research - Analysis of materials, dust and fiber
• Medicine and Biology - Determining composition of calculi, sediments and bio-crystallates
• Forensics - Identification of trace elements and materials such as explosives
• Materials Analysis - Metal, ceramics, glass, building materials, etc.
• Geology - Mineralogy, petrography, core drilling sample analysis, thin section identification
• Chemistry - Quality control of in-process or end products, compounds, pharmaceutical analysis and identification of precipitates

The MT9920 & MT9930 Incident and Transmitted Light Series is a suitable instrument for most applications in Geology, Petrology, Mineralogy, Toxicology, Chemistry, Pharmaceutics, Medicine, Pulp/Paper, Atmospheric Pollution, Ceramics Technology, Forensic Medicine, etc.

Included:
   • MT9930L: Trinocular MT9930L Series LED Incident and LED Transmitted Polarizing Microscope is an investigative tool for isotropic and anistropic materials. Focusable Bertrand lens, Rotatable Analyzer with 180° graduations. Newly designed Strain free Abbe Condenser 1.25 N.A. with a swing out top lens and built in iris in a dovetail mount is easy to change and operates and tracks very smoothly and predictably facilitating accurate iris control with improved usability. Newly improved ∞ Infinity Corrected Objectives ICOS Optical System.  Ceramic coated, 175mm diameter, ball bearing, circular rotating stage graduated 360°, with 1°increments and vernier reading to 0.1°. Polarizer in a swing in-out click/clamp mount, fully rotatable 360° with click stop at 0°and 90°. 
   • MA953: Trinocular head - Siedentopf type, inclined at 30 degrees with reticle angle  compensation, I.P. adjustment 53mm to 75mm, graduated diopter on left eyetube (23.2.0 mm I.D. eyetube) (*Included in model MT9930 & MT9930L) 
   • MA407CP: Super Widefield compensating KHW10X, focusing eyepiece with cross-line and guide pin, F.N. 20 are standard with 21mm reticle mount
   • MA407: KHW-10X Compensating eyepiece, F.N. 20 (each) (Tube O.D. 23.2mm) (qty#1) 
   • MA935: Strain free Plan objective 4X/N.A.0.10, W.D. 25.89mm, ∞ Infinity Corrected 
   • MA936: Strain free Plan objective 10X/N.A.0.25, W.D. 7.3mm, ∞ Infinity Corrected   
   • MA938: Strain free Plan objective 40XS/N.A.0.65, W.D. 0.50mm, ∞ Infinity Corrected 
   • MA976/05: Strain free Abbe condenser with swing out top lens, N.A. 0.90 with iris diaphragm and dovetail mount 
   • Stage: Rotatable stage with Vernier graduation 360° with Vernier, reading to 1°, 150mm diameter with stainless steel stage clips (Factory Installed)
   • MA946: Stainless steel Stage Clips (qty#2) 
   • MA988: CombinationFirst order red compensating plate and 1/4 Wave-length test plate and Brightfield spot, for use with MT9920 and MT9930 (20mm X 6mm X 142mm) 
   • MA956/05: Rotatable analyzer with 180 degree graduations (34mm x 6mm x 156mm) 
   • MA955: Vertical illuminator attachment, 6V 30W halogen Koehler (Included in MT9920 and MT9930 Series) 
   • MA927/05: Table-top transformer with automatic voltage sensing power supply for use with MA955 vertical illuminator (Input voltage 100V-240V) (Included with MT9920 and MT9930 Series) 
   • MA289/05: Blue clear filter, 29.8mm diameter unmounted, for transmitted light (Included in Halogen models) 
   • MA679: Polarizing filter in metal mount (For use with incident illuminator, fits 25mm filter slot) 
   • Polarizer: Swing in-out click/clamp mount, fully rotatable 360° with click stop at 0°and 90° (Included in MT9920 and MT9930 series) (Factory Installed)
   • MA955LED: Vertical Koehler illuminator attachment, LED (Included in MT9920L & MT9930L) 
   • MA927/05LED: Table-top transformer with automatic voltage sensing power supply for use with  MA955LED 
   • MA809/10: Removable AC Electric cord with plug for 115V models (*Included in all 115V models) or
   • MA809/20: Removable AC Electric cord with plug for 220V models (*Included in all 220V models) 
   • MA494/PT#1: Nosepieces centering screws (each) (qty# 2) 
   • MA711: Dust cover for MT9900 Series (Included in all models) 
   • MA905: Interference Color Chart Laminated Sheet
   • HD1500MET-M: The HD1500MET-M is our full featured 6 MP camera with a 1/3” CMOS chip.  A 0.3X C” mount adapter (MA151/35/03) is needed to attach it to any standard Meiji Techno America Trinocular Microscope.  The HD1500MET-M features a full HD (1080x1920) resolution, which provides high fidelity images with a refresh rate of 60fps- frames per second when connected via HDMI, so there is absolutely no lag in the live video feed when moving your specimen or part. Included with the 11.8” High Definition display is a mounting kit that allows the display to be mounted directly in front of the HD1500MET-M.
   • MA151/35/03: C-mount adapter with 0.3X lens

OPTIONAL COMPONENTS & ACCESSORIES BELOW

Viewing Heads:
   • MA952: Binocular head - Siedentopf type, inclined at 30 degrees with reticle angle compensation, I.P. adjustment 53mm to 75mm, graduated diopter on left eyetube (23.2.0 mm I.D. eyetube) (Included in model MT9920 & MT9920L) 

Eyepieces:
   • MA407/05: KHW-10X Compensating Focusing eyepiece, F.N. 20 (each) (Tube O.D. 23.2mm)

Semi Planachromat POL Objectives for Transmitted Light Work:
   • MA937: Strain free Plan objective 20X/N.A.0.40, W.D. 7.29mm
   • MA939: Strain free Plan objective 60XS/N.A. 0.85, W.D. 0.2mm
   • MA940: Strain free Plan objective 100XS/N.A. 1.25 oil, W.D. 0.14mm

Semi Planachromat POL Objectives for Incident Light Work:
   • MA947: Strain free Plan objective 20X/N.A. 0.40, W.D. 5.2mm
   • MA948: Strain free Plan objective 40XS/N.A. 0.65, W.D. 0.81mm

Stage:
   • MA299: Attachable mechanical stage for MT9000 or MT9900 Series
   • MA945: Attachable mechanical stage for MT9000 or MT9900 Series with Point Counter

Wave Plate and Condensers:
   • MA904/10: Senarmont compensator (A highly accurate 1/4 wave plate for use with MA956/05 rotating analyzer - used to measure retardation) (For use with MT9920 & MT9930)
   • MA654/10: Quartz Wedge, 6 order, graduated for MT9000 or MT9900 Series (20mm x 6mm x 150mm)

Filters:
   • MA475/05: Blue clear filter, 19.5mm diameter in mount (For use with incident illuminator) )
   • MA198: ND13 neutral density filter, 19.5mm in diameter in mount, fits 25mm filter slot (For use with incident illuminator)

Bulbs and Fuses:
   • MA326: Spare bulb, 6V 30W Halogen
   • MA327: Fuse 3A (Included in 50W models), replacement